Taylor Technologies K-1533PT Owner's manual

Type
Owner's manual

Taylor Technologies K-1533PT is a versatile water testing kit that provides accurate and reliable results for a variety of water quality parameters. This kit is designed to measure P/M & P/T alkalinity, which are important indicators of the buffering capacity of water. The kit includes all the necessary components to perform both P/M and P/T alkalinity tests, and the instructions are clear and easy to follow.

Taylor Technologies K-1533PT is a versatile water testing kit that provides accurate and reliable results for a variety of water quality parameters. This kit is designed to measure P/M & P/T alkalinity, which are important indicators of the buffering capacity of water. The kit includes all the necessary components to perform both P/M and P/T alkalinity tests, and the instructions are clear and easy to follow.

COMPONENTS:
1 x 5084 Instruction
1 x 9198G Sample Tube, Graduated (25 mL) w/ cap & green dot, plastic
*1 x R-0637-C Methyl Orange Indicator, 2 oz, DB
1 x R-0638G-C Phenolphthalein Indicator, 2 oz w/ green cap, DB
*1 x R-0645-C Total Alkalinity Indicator, 2 oz, DB
1 x R-0687G-C Sulfuric Acid .12N, 2 oz w/ green cap, DB
1 x R-0736G-C Sulfuric Acid .6N, 2 oz w/ green cap, DB
*Kit includes only one of these indicators.
TO ORDER REPLACEMENT PARTS AND REAGENTS CALL TOLL-FREE
800-TEST KIT (800-837-8548).
PROCEDURE:
CAREFULLY READ AND FOLLOW PRECAUTIONS ON REAGENT LABELS.
KEEP REAGENTS AWAY FROM CHILDREN.
NOTE: When dispensing reagents from dropper bottles, always hold bottle in a
vertical position.
P/M Alkalinity Test
NOTE: For 1 drop = 10 ppm, use R-0687G Sulfuric Acid .12N.
For 1 drop = 50 ppm, use R-0736G Sulfuric Acid .6N.
1.Rinseandll25mLsampletube(#9198G)to25mLmarkwithwatertobetested.
NOTE: Forresultsingrainspergallon(gpg),llto14.6mLmark.
DROP TEST
P/M & P/T ALKALINITY (1 drop = 10 or 50 ppm)
2.Add3dropsR-0638GPhenolphthaleinIndicator.Swirltomix.Samplewillturn
pink(Fig.1)ifPalkalinityispresent—proceedtoStep3.Ifsampleiscolorless,
proceedtoStep4.
3.Add R-0687G Sulfuric Acid .12N or R-0736G Sulfuric Acid .6N dropwise,
swirlingandcountingaftereachdrop,untilcolorjustchangesfrompinktocolorless.
Record drops as P reading.
4.Add3dropsR-0637MethylOrangeIndicator.Swirltomix.Samplewillturnyellow
(Fig.2).
5.Add R-0687G Sulfuric Acid .12N or R-0736G Sulfuric Acid .6N dropwise,
swirlingandcountingaftereachdrop,untilcolorchangesfromyellowtoorange
(salmonpink)(Fig.3).Recordtotaldrops(Steps3&5)asMreading.
6.If R-0687G Sulfuric Acid .12N is used, multiply P reading by 10. Record
as parts per million (ppm) P alkalinity as calcium carbonate. Multiply
M reading by 10. Record as ppm M alkalinity as calcium carbonate.
NOTE: For14.6mLsample,recordPreadingasgrainspergallon(gpg)Palkalinity
ascalcium carbonate. Record M reading asgpgMalkalinityascalcium
carbonate.
IfR-0736GSulfuricAcid.6Nisused,multiplyPreadingby50.Recordaspartsper
million(ppm)Palkalinityascalciumcarbonate.MultiplyMreadingby50.Record
asppmMalkalinityascalciumcarbonate.
Fig. 1
Fig. 2
Fig. 3
Instr. #5084
(OVER)
Fig. 4
Fig. 5
Instr. #5084
NOTE: For14.6mLsample,multiplyPreadingby5.Recordasgrainspergallon
(gpg)Palkalinityascalciumcarbonate.MultiplyMreadingby5.Recordas
gpgMalkalinityascalciumcarbonate.
P/T AlkalinityTest
NOTE: For 1 drop = 10 ppm, use R-0687G Sulfuric Acid .12N.
For 1 drop = 50 ppm, use R-0736G Sulfuric Acid .6N.
1.Rinseandll25mLsampletube(#9198G)to25mLmarkwithwatertobetested.
NOTE: Forresultsingrainspergallon(gpg),llto14.6mLmark.
2.Add3dropsR-0638GPhenolphthaleinIndicator.Swirltomix.Samplewillturn
pink(Fig.1)ifPalkalinityispresent—proceedtoStep3.Ifsampleiscolorless,
proceedtoStep4.
3. Add R-0687G Sulfuric Acid .12N or R-0736G Sulfuric Acid .6N dropwise,
swirlingandcountingaftereachdrop,untilcolorjustchangesfrompinktocolorless.
Record drops as P reading.
4.Add5dropsR-0645TotalAlkalinityIndicator.Swirltomix.Samplewillturngreen
(Fig.4).
5.AddR-0687GSulfuricAcid.12NorR-0736GSulfuricAcid.6Ndropwise,swirling
andcountingaftereachdrop,untilcolorchangesfromgreentored(Fig.5).Record
totaldrops(Steps3&5)asTreading.
DROP TEST
P/M & P/T ALKALINITY (1 drop = 10 or 50 ppm)
6.IfR-0687GSulfuricAcid.12Nisused,multiplyPreadingby10.Recordasparts
per million (ppm) P alkalinity as calcium carbonate. Multiply Treading by 10.
RecordasppmTalkalinityascalciumcarbonate.
NOTE: For 14.6 mL sample, record P reading as grains per gallon (gpg) P
alkalinityascalcium carbonate. Record Treadingas gpgTalkalinity as
calcium carbonate.
If R-0736G Sulfuric Acid .6N is used, multiply P reading by 50. Record
as parts per million (ppm) P alkalinity as calcium carbonate. Multiply
T reading by 50. Record as ppm T alkalinity as calcium carbonate.
NOTE: For14.6mLsample,multiplyPreadingby5.Recordasgrainspergallon
(gpg)Palkalinityascalciumcarbonate.MultiplyTreadingby5.Recordas
gpgTalkalinityascalciumcarbonate.
31LovetonCircle,Sparks,MD21152U.S.A.
800-TESTKIT(837-8548)•410-472-4340 8/16
  • Page 1 1
  • Page 2 2

Taylor Technologies K-1533PT Owner's manual

Type
Owner's manual

Taylor Technologies K-1533PT is a versatile water testing kit that provides accurate and reliable results for a variety of water quality parameters. This kit is designed to measure P/M & P/T alkalinity, which are important indicators of the buffering capacity of water. The kit includes all the necessary components to perform both P/M and P/T alkalinity tests, and the instructions are clear and easy to follow.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI