Fig.2
FIXTURE
WIRES
BLACKOR
SMOOTH
FIXTURE
WIRES
WHITEOR
RIBBED
FIXTURE
WIRES
GREENOR
BARE
COPPER
(GROUND)
HOUSE
WIRES
BLACK
(HOT)
HOUSE
WIRES
WHITE
(NEUTRAL)
HOUSE
WIRES
GREENOR
BARECOPPER
(GROUND)
Page 2/2
C
US
LED module replace(Fig.3)
Shut
off power before replacing
1:There have ten lamp heads (H) with LED module ,if one
of them does no work , replace the complete no work one
from the canopy as shown in Fig. 3.Make sure the power
is off before you replace ;
For LED Pendant
INSTALLATION INSTRUCTIONS FOR P8229-668-L
ceiling as shown in Fig.1,return power to the junction box
ceiling carefully;
4:Remove the "8" buckle (N) and take off the cable wire from
the hole of the canopy (F). Save these parts for
subsequent service.
cables.
Fig.3
K
J
N
L
L
H
N
G
3:Broken the insulating tape (J),disconnect the wire
nut (K), cut the PC tie (L),cut a short section of cable
wire if necessary ,be careful not to damage the other
insulation jacket of the inner wire when stripping bare
strands of 1/2''.