Product description
(52) Sanding bands
18xФ12x12mm=9x granulation: 80, 9x granulation: 120
18xФ6x12mm=9x granulation: 80, 9x granulation: 120
18xФ9x12mm=8x granulation: 80, 8x granulation: 120
(40) Sanding discs
40x Sandpaper in storage box (Ф19mm, granulation: 220)
(40) Sanding disc with back adhesive
40x Sandpaper in storage box (Ф19mm, granulation: 120)
(36) Emery cut-off wheels
36x cutting disc (Ф23mm)
(16) Fiberglass cut-off wheels
16x fiberglass reinforced cutting disc(Ф31mm)
(4) Flap wheel
2x grinding fan (Ф31mmx9mm, granulation:80)
2x grinding fan (Ф15mmx15mm, granulation:80)
(6) Silicon carbide grinding wheels
6x silicon carbide grinding wheels (Ф9mm, granula
tion:180, blue-gray)
(6) Aluminum oxide grinding wheels
6x alumina-grinding wheels ( 9mm, granulation:220, pink)
(6) White alundum grinding wheels
6x grinding wheels (Ф9mm, white)
(2) Rubber emery wheels
2x rubber polishing wheel (Ф22mm, grey)
(2) Diamond wheels
2x diamond cutting disc (Ф22mm, 8 holes)
(1) Wrench
1x wrench
(9) HSS twist drill bits
3xФ3mm
3xФ2mm
3xФ1.55mm
(12) Diamond-point drill bit
1x diamond cutter cylinder (Ф3x10mm)
2x diamond cutter cylinder (Ф2x10mm)
1x diamond cutter knob cylindrical (Ф3x10mm)
2x diamond cutter ball (1xФ4mm, 1xФ2mm)
1x diamond cutter flame
1x diamond cutter cone
1x diamond cutter reverse cone
1x diamond cutter flathead
1x diamond bur tip
1x diamond cutter wire cut
(6) Rubber grinding stones
2x cylinder
2x missile
2x top
(4)
Silicon carbide grinding stones
2x Silicon Carbide Grinding Stone cylinder (Ф19x5mm)
2x Silicon Carbide Grinding Stone cylinder (Ф10x3mm)
(6) Aluminum oxide grinding stones
2x alumina-grindstone cylinder (Ф15x9mm)
2x alumina-grindstone cylinder (Ф9x12mm)
2x Aluminum oxide whetstone projectile (Ф9x19mm)
(1) Brass wheel brush
1x brass brush (Ф19mm)
(3) Stainless steel brushes
1x Ф19mm
1x Ф15mm
1x Ф14mm
(3) Bristle brushes
1xФ19mm
1x Ф15mm
1x Ф14mm
(3) Collets
1x Ф3mm
1x Ф2mm
1x Ф1mm
(3) Sanding shanks
1x Ф12mm
1x Ф9mm
1x Ф6mm
(1) Dressing stone
(1) Polishing compound
(1) Sucking disc
(8) Felt polishing wheels
2x Ф25mm
6x Ф12mm
(1) Felt tip
1x Ф9mm
(2) Mandrel wheels (22,15, 23, 14)
1x Ф1.6mm
1x Ф2.4mm
(1) Mandrel wheels
276-PIECE ROTARY TOOL
ACCESSORIES KIT
W124003A
OPERATING INSTRUCTIONS AND SAFETY INSTRUCTIONS
Fig.1
Fig.3
Fig.4
Fig.2
MAX.
20000
rpm
MAX.
20000
rpm
MAX.
25000
rpm
MAX.
25000
rpm
MAX.
20000
rpm
MAX.
30000
rpm
MAX.
20000
rpm
MAX.
25000
rpm
MAX.
20000
rpm
MAX.
25000
rpm
MAX.
35000
rpm
MAX.
32000
rpm
MAX.
15000
rpm
MAX.
30000
rpm
MAX.
30000
rpm
MAX.
30000
rpm
MAX.
30000
rpm
MAX.
32000
rpm
Safety Instructions
THESE INSTRUCTIONS ARE FOR YOUR SAFETY. PLEASE READ
THROUGH THEM THOROUGHLY BEFORE USE AND KEEP THEM
FOR FUTURE REFERENCE.
Warning!
Always keep children away from the product.
This product is not a toy, children should be supervised
to ensure that they do not play with the appliance. It will
cause danger and injury to children.
276-Piece Rotary Tool Accessories Kit
Introduction
Intended Use
The operating instructions are part of this
product.
It contains important safety information,usage and
disposal.
The product is intended for drilling, milling, engraving,
polishing, removing rust, cleaning, grinding, and cutting.
If the Sanding band is too loose, please work as follows:
· Screw the screw on the head of the sanding shanks
clockwise, using a Phillips screwdriver,until the sanding
band is tightened.
Tip for using the sanding shanks
·
The packaging is made of environmentally friendly
materials, you need contact the local recycling centers
to dispose.
· Waste disposal options.
· To dispose waste in accordance with local govern-
ment regulations.
Disposal
ATTENTION! RISK OF INJURY!
Do not use the product if there is any damage.
Check whether all parts are properly mounted.
Incorrect installation may result in injury.
CAUTION RISK OF INJURY!
Always wear safety goggles when use the product.
ATTENTION! RISK OF INJURY!
Be sure to read all safety warnings and all instructions
before use. Failure to follow the warnings and instruc-
tions may result in risk of injury.
Function
Drilling
Milling
Engraving
Cleaning
Grinding
Cutting
Polishing
Removing
rust
Accessories
HSS twist drill bits
Collets
Diamond-point drill bits
Collets
Diamond-point drill bits
Collets
Bristle brushes
Stainless steel brushes
Brass wheel brush
Collets
Sanding shanks
Sanding bands
Collects
Aluminum oxide grinding stones
Silicon carbide grinding stones
Emery cut-off wheels
Sanding discs
Sucking disc
Mandrel wheels
Flap wheel
Diamond wheels
Collects
Mandrel wheels
Emery cut-off wheels
Fiberglass cut-off wheels
Stainless steel brushes
Brass wheel brush
Collet
Rubber grinding stones
Mandrel wheels
Felt polishing wheels
Polishing compound
Collets
Application
Wood wooking
Craft, modelling, repairing. Use on
ceramics, tiles, brick, glass,
plastics, fiberglass, steel and wood.
Marking, Detailing
Metal, poorly accessible plastic
housing clean or the surrounding
area of a door lock clean
Grinding work on the rock,hard
material, such as ceramic or
alloy steel
Metal, plastic and wood working
Removing rust
Various metals and plastics,
especially precious metals
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Bahco BH7PS30 User manual
-
GOXAWEE 60 Grit 20Pcs Diamond Burr Set - GOXAWEE Rotary Grinding Burrs Drill Bits Set User manual
-
Professional Woodworker 51872 Malay
-
Foredom K.3330 Owner's manual
-
Dremel 8050-N/18 User guide
-
-
-
-
Craftsman 395 User manual
-
