Samsung RF28R7201DT User guide

Type
User guide
28 cu. ft. French Door
MODEL RF28R7201 DIMENSIONS
DEPTH
WITH D00R
OPEN 90°
48
1
/
4
"
DEPTH
WITH DRAWER
OPEN
53"
TOP OF REFRIGERATOR WITH DRAWER OPEN
DEPTH
WITHOUT
DOOR
29
3
/
8
"
DEPTH
TO DOOR
HANDLE
36
1
/
2
"
HEIGHT
WITH HINGE
70
"
DEPTH
WITHOUT
HANDLE
34"
WIDTH
(FITS 36" OPENING)
35
3
/
4
"
62
1
/
8
"
125° 125°
TOP OF REFRIGERATOR WITH DOORS OPEN 125°
Be sure your new fridge will fit
Don't wait until delivery to be sure your new refrigerator will t – both
in your kitchen and through all doorways. This guide includes all pertinent
measurements and clearances so you can buy with condence.
Measure height
including flooring.
Be sure to allow for
hinge clearance
height if needed.
Measure width
including countertop
overhang.
Measure depth
including molding
or trim.
Walk the delivery route
3Identify the narrowest opening that the appliance will travel, from outside the home to the location where it will be installed.
3Appliance depth or width must be smaller than the width of the narrowest opening.
Standard-Depth Refrigerator
Standard-depth refrigerators typically measure 30 to 35 inches in depth,
as opposed to counter-depth refrigerators that sit ush with cabinetry.
Installation clearances
3Allow 3.75" of clearance when installing along a wall.
This will allow for the door to open 90 degrees without
the handle contacting the wall.
3Allow 2" minimum clearance at rear for proper air
circulation and water/electrical connections.
3Allow a 3/8" minimum clearance at sides and top
for ease of installation.
For optimal usage and ability to open refrigerator doors
completely, do not install next to a wall.
Please note: The above dimension and cutout information is for planning
purposes only. For complete installation details, consult manual packed
with product, or download manual online at samsung.com.
  • Page 1 1

Samsung RF28R7201DT User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI