ION 7.9T
OWNER’S MANUAL
BLADEZ Corporation
20155 Ellipse
Foothill Ranch, CA 92610
Phone: 949-206-8152
Fax: 949-206-0013
Email:
Revision Date: 06/01/06
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
1
INTRODUCTION:
C
ongratulations for selecting ION by BLADEZ as your primary source of
fitness equipment. ION by BLADEZ treadmills offer many exercise programs
that benefit users of all levels and ages. The treadmill is designed to make
your workouts more effective and enjoyable.
Please read this manual carefully before using your 7.9T treadmill. This will
allow you to get a full understanding of all the features BLADEZ’ treadmills
provide. If you have any questions or concerns, please contact BLADEZ
Corporation or any authorized BLADEZ FITNESS distributors in your area.
Phone: 949-206-8152
Fax: 949-206-0013
Email:
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
2
TABLE OF CONTENTS
SECTION PAGE
1. IMPORTANT SAFETY INSTRUCTIONS............................................................... 4
2. ASSEMBLY INSTRUCTIONS................................................................................. 6
3. GETTING STARTED................................................................................................10
4. PROGRAM DETAILS ..............................................................................................15
5. PREVENTIVE MAINTENANCE.............................................................................18
6. TROUBLESHOOTING.............................................................................................19
7. WARRANTY.............................................................................................................21
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
3
BEFORE YOU BEGIN
We recommend that you become familiar with the frequently used
components of your Treadmill. This will assist you in making your workouts
more enjoyable.
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
4
SECTION 1
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using the treadmill.
Notice: Consult your family physician or health care professional to develop a
well planned exercise program to fit your health needs. If you encounter any
pain or breathing discomfort while working out, STOP!, and consult a
physician before continuing.
WARNING!
1. It is wise to always unplug this appliance from the electrical outlet
immediately after use.
2. Keep Children away from machine while in use.
3. Do not wear loose or dangling clothing while using the treadmill.
4. Maximum user weight of this treadmill is 300 lbs.
5. Keep a minimum clearance of 18” on each side and 24” at the rear of the
treadmill for safety.
6. It is mandatory that you unplug the treadmill prior to cleaning to reduce
the risk of electric shock, serious burns, and the risk of injuries.
7. The treadmill should never be left unattended when in operation. Unplug
the treadmill from the outlet when not in use or when servicing the
treadmill.
8. Close supervision is necessary when this appliance is used by or near
children, invalids, or disabled persons.
9. Use this appliance only for its intended use as described in this manual.
Do not use any attachment not recommended by the manufacturer.
10. Never operate this appliance if it has a damaged cord or plug, or if it is not
working properly. Call your service center for any service concerns before
taking your treadmill in for repair.
11. Keep the cord away from heated surfaces.
12. Never drop or insert any object into any opening.
13. Do not use outdoors.
14. Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
15. To disconnect, turn all controls to the off position, then remove plug from
outlet.
16. Connect this appliance to a properly grounded outlet only.
17. This appliance is intended for household use only.
SAVE THESE INSTRUCTIONS
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
5
IMPORTANT SAFETY INSTRUCTIONS CONTINUED
GROUNDING INSTRUCTIONS
This product must be grounded. If it malfunctions or breaks down, grounding
provides a path of least resistance for electric currents, to reduce the risk of
electric shock. This product is equipped with a cord which has an equipment-
grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
WARNING!
– An improper connection of the equipment grounding
conductor can result in a risk of an electrical shock. Check with a qualified
electrician or serviceman if you are in doubt as to whether the product is
properly grounded.
Do not modify the plug provided to you. If it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
This product is for use on a nominal 110-120 volt circuit and has a grounding
plug that looks like the plug illustrated in the figure. Make sure that the
product is connected to an outlet having the same configuration as the plug.
No adapter or extension cord should be used with this product.
GROUNDING METHODS
GROUNDED
OUTLET
GROUNDING PIN
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
6
SECTION 2
ASSEMBLY INSTRUCTIONS
ITEM
Description Qty
A
Display Console 1
B
Frame 1
C
Left Upright 1
D
Right Upright 1
E
Bolt cover 2
F
Left Handrail 1
G
Right Handrail 1
H
Bottle 1
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
7
ASSEMBLY INSTRUCTIONS CONTINUED
Item Description Qty
a Bolt M8xP1.25x15 8
b Bolt K-299 4
c
Allen Wrench 6mm
1
d
Allen Wrench 5mm
1
e SILICON 1
f Safety Keys 1
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
8
ASSEMBLY INSTRUCTIONS CONTINUED
We strongly recommend using two people to ease the treadmill assembly.
For convenience, there is a tool kit included with the treadmill.
NOTE: Make sure the power cord is unplugged before you begin installation.
1. Use the guide wire pre installed in the
right side upright (D) to secure the main
control wire harness.
2. Next feed the cable through the opening
as shown and pull the guide wire from
the top of the upright (D).
3. Next insert the rubber sleeve in the
bottom opening on the right side upright
(D) as shown.
4. Place both uprights (C,D) onto the frame
base as shown in arrows, then secure
them with 4 bolts (a) on each side with
the wrench provided.
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
9
ASSEMBLY INSTRUCTIONS CONTINUED
5. Connect the control wire harness pulled
out from the upright tube (D) to the
control wire harness from the display
console (A).
6. Attach the handrails (F,G) on both sides
as shown.
7. Lay the display console assembly on the
uprights and fasten them with 2 bolts (b)
on each side.
8. Next snap the bolt covers (E) in place.
Note: When you fasten the bolts, please pay
attention not to press the control cable inside
the tube.
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
10
SECTION 3
GETTING STARTED
FOLDING:
To fold your treadmill into the upright position, first be sure to set the elevation to 0 %
incline. The treadmill will not lock into the upright position if the treadmill is not at 0 %
incline.
Using both hands, lift the treadmill by the end caps at the rear of the treadmill and push it
up until the retaining shaft locks the treadmill into place.
UNFOLDING:
To unfold the treadmill from the upright position simply depress the unfolding pedal with
your right foot and guide the deck down with both hands. Make sure that you do not let
go until the deck is firmly on the floor.
MOVING THE TREADMILL
The treadmill will need to be locked in the upright position as illustrated above.
Grab the end caps with two hands and slowly pull the deck down towards your body until
the casters are able to roll freely. Keep the treadmill at that angle until you are done with
your move.
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
11
GETTING STARTED CONTINUED
SAFETY KEY & CLIP
Your ION By Bladez treadmill is equipped with a safety key that will disable the
treadmill if it is not in place. You should attach the clip end to your clothing. The magnet
end goes into the recess of the console. If at any time you need to stop the treadmill
quickly, simply pull the safety key off the console. This will cut all power to the treadmill
and it will come to a complete stop. To resume your workout, place the safety key back in
place. You will then need to program your workout again.
BEFORE STARTING
Straddle the running belt and stand on the plastic side rails. Insert the safety key and
attach the clip to your clothing. Do not stand on the walking belt while starting or
stopping the treadmill.
KEY FUNCTIONS:
QUICK START – This key is used to begin any treadmill program or quick start.
MODE – This key is used to enter into the program mode. It is also used to change the
values on the display readout such as changing from Cal, Distance, Speed.
STOP/RESET – This key is used to stop the treadmill at any time. Press the STOP
button and hold for 3 seconds and the treadmill will reset itself.
ENTER – This key is used to confirm pre-selection. It can also be used to shift from
English to Metric units or vice versa, please refer to the following:
Change from Metric to Standard or vice versa
1. Press ENTER button for 10 seconds and either “En” or “Sl” will appear in the lower
left corner of the display window.
2. Using the select “En” for Standard or “Sl” for Metric display.
3. Press the ENTER button to lock in your change.
4. It will take 5 seconds to reset itself.
This key is used to adjust the speed on the treadmill.
It is also used to change values during programming.
This key is used to adjust the elevation on the treadmill.
It is also used to change values during programming.
INSTANT SPEED KEYS – You can change the speed of the treadmill by pressing one
of the Instant Speed Key buttons. Each key represents the assigned value in Miles per
hour (MPH). Choose from 1 2 4 6 8 10 MPH.
INSTANT ELEVATION KEYS – You can change the elevation of the treadmill by
pressing one of the Instant Elevation Key buttons. Each key represents the assigned
percentage of elevation. Choose from 2 4 6 8 10 12%.
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
12
GETTING STARTED CONTINUED
USING YOUR DISPLAY
Start up:
During power-up, 150 shows up on the BLUE backlit LCD display as the
default weight in lbs. The user needs to input his/her own weight to allow
the accurate count on CALORIES in the entire workout program, then press
ENTER to confirm selection.
Your Ion 7.9T display uses a BLUE backlit LCD display. In this display you
can view your statistical information, as well as the program profiles and ¼-
mile track display.
When in manual mode, TIME will count up and the ¼-mile track display
will help to mark your progress.
While in programs, TIME will count down and the program profile will help
mark your progress.
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
13
GETTING STARTED CONTINUED
PERSONAL COOLING FAN
1. Turn on POWER.
2. Your ION 7.9T is equipped with a personal cooling fan.
3. Turn on your Personal Cooling Fan by pressing the FAN Button
.
4. Press the FAN button
again to turn the fan off.
QUICK START
1. Adjust weight if you wish using or and press ENTER to
confirm.
2. Press START key. The running belt will start to move at 0.5 MPH.
3. Adjust Speed with the keys.
4. Adjust Incline with the keys.
TO STOP
1. Step off running belt onto the plastic side rails.
2. Press STOP key. The running belt will stop.
Note: For an immediate stop, pull out the safety key from the safety key
recess and the treadmill will stop abruptly.
MANUAL PROGRAM SETUP
1. Turn on POWER.
2. Adjust weight using or and press ENTER to confirm.
3. Press MODE key ~ Program P01 will be flashing.
4. Press ENTER key ~ TIME will be flashing.
5. Adjust time with the or keys.
6. Press START key.
7. Adjust Speed with the keys.
8. Adjust Incline with the keys.
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
14
GETTING STARTED CONTINUED
PROGRAM (P02-P08) SETUP
1. Turn on POWER.
2. Adjust weight using or and press ENTER to confirm.
3. Press MODE key ~ Program P01 will be flashing.
4. Select a program from P02-P08 with the or keys.
5. Press ENTER key to lock in your selection. Level L01 will be flashing.
6. Adjust the levels from L01-L10 with the or keys.
7. Press ENTER key to lock in your selection. Time light will be flashing
except P02 (no time option).
8. Adjust the time from 20-99 minutes with the or keys.
9. Press ENTER key to lock in your selection and begin the program.
CONSOLE FEEDBACK
TIME – This will read the number of minutes left in the program that you
have selected. In Quick Start it will read the number of minutes that
you have been exercising.
INCLINE – Elevation will read as a percent of incline (0-12%).
PULSE – Pulse will read in beats per minute (BPM).
WEIGHT – Weight will read in pounds (Lbs).
LEVEL – Levels will read from 1-10 levels.
SPEED – This is how fast you are moving in terms of miles per hour
(MPH).
DIS – Total distance traveled during your workout. This value is displayed
in miles.
CAL – This reading is the amount of body heat in calories burned during
your workout. This is an estimated value based on your weight.
PROGRAM – Program will indicate which program you are using.
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
15
SECTION 4
PROGRAM DETAILS
Each preset program P01-P07 has its own 10 levels of workout choices as shown in
the following profiles.
P01 is a Manual program, P02 through P07 are shown as the following at level 5
and P08 is a user defined program.
P02 - 9 Hole Walk
(
The 9 Hole is a preset distance of 2.17miles. No Need to adjust time)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
= Speed
=Elevation
P03 - Hill Climb
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
= Speed
=Elevation
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
16
PROGRAM DETAILS CONTINUED
P04 - Endurance Run
1 2 3 4 5 6 7 8 9 101112131415161718192021222324252627282930
= Speed
=Elevation
P05 - Interval Run
1 2 3 4 5 6 7 8 9 101112131415161718192021222324252627282930
= Speed
=Elevation
P06 - Rolling Run
1 2 3 4 5 6 7 8 9 101112131415161718192021222324252627282930
= Speed
=Elevation
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
17
PROGRAM DETAILS CONTINUED
P07 - Weight Loss Walk
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
= Speed
=Elevation
P08 is a user defined program that allows user to freely input the level of difficulty to
better suit their exercise goal. User can design his/her own exercise preference up to 30
sequences, he/she can start the program immediately at any sequence by simply pressing
the “Quick Start” key.
Max Speed and Max Elevation per level:
Level
Max
Speed
Max
Elevation
Level
Max
Speed
Max
Elevation
Level
Max
Speed
Max
Elevation
122 143 140
223 24.54 24.50
323 354 351
424 45.55 45.51
524 565 561
625 66.56 66.51
725 776 771
826 87.57 87.52
926 987 982
10 2 7 10 8.5 8 10 8.5 3
Level
Max
Speed
Max
Elevation
Level
Max
Speed
Max
Elevation
Level
Max
Speed
Max
Elevation
13.50 140 120
240 24.50 22.50
34.50 350 330
450 45.50 43.50
55.50 5 5 0 55.50
660 66.50 660
76.50 7 7 0 76.50
870 87.50 870
97.50 9 8 0 97.50
10 8 0 10 8.5 0 10 8 0
9 Hole Walk Hill Climb Endurance Run
Interval Run Rolling Run Weight Loss
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
18
SECTION 5
PREVENTIVE MAINTENANCE
The running belt can shift to one side or simply
‘skid over’ when running. To center the belt using
the 6mm Allen wrench, run the machine at 3mph
for a few minutes to determine which side the belt
is drifting towards; left or right.
If the belt is drifting left
i) Turn the treadmill off and unplug from the
machine.
ii) Tighten the left bolt a ¼ turn (clockwise).
iii) Loosen the right bolt a ¼ turn
(counterclockwise).
iv) Run the belt at 3 mph again for a few minutes.
If the belt continues to drift to the left, repeat
steps.
If the belt is drifting right
i) Turn the treadmill off and unplug from the
machine.
ii) Tighten the right bolt a ¼ turn (clockwise).
iii) Loosen the left bolt a ¼ turn
(counterclockwise).
iv) Run the belt at 3 mph again for a few minutes.
If the belt continues to drift to the right, repeat
steps.
Once the running belt has been adjusted closer
to the center, the treadmill can be powered on
again.
It is recommended that the deck be lubricated
every 6~12 months according to the frequency of
usage.
Use 6mm Allen wrench to loosen the bolts in the
end caps. Remove excessive accumulations of dust,
dirt, and other substances from running deck. Use a
clean soft cloth.
Warning! Do not use cleaner under the running
belt.
Pull up running belt, dispense lubricant on
deck, and spread evenly.
After lubricating deck, center the belt, and tighten
the end caps. Check belt condition and adjust if
necessary referring to the steps above.
Rear Roller Bolt
6 mm wrench
0.5~4.0 Mile lubricate every 1 year
4.0~7.0 Mile lubricate every 6 months
7.0~10.0 Mile lubricate every 3 months
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
19
SECTION 6
TROUBLESHOOTING
ERROR MESSAGE
PROBABLE CAUSES
SOLUTION
E1
- Loss of Feedback Speed Sensor disconnected Check Speed
Sensor Connection
- Running Deck Running Deck not
lubricated
Speed Sensor misaligned
Check R-Deck oil
Check Sensor position
Speed Sensor Faulty Replace S-Sensor
Loose Display Cable Check Display
Cable connection
Faulty MCB
(D2 LED on)
Replace MCB
Drive Motor disconnected
Check D-Motor connection
Drive Motor Faulty Replace D-Motor
E4
- Body Fat Data Incomplete Heart Rate not detected Hold Heart Rate Grip
Properly
- Loss of Data Faulty Receiver in Display Replace Heart Rate
Receiver
Faulty Control Board in
Display
Replace Heart Rate Control
Board
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
BLADEZ T6 Owner's manual
-
-
-
-
BLADEZ ION 490E Owner's manual
-
-
-
-
-
Other documents
-
iON 1807T-ME Owner's manual
-
BH FITNESS T8 SPORT Owner's manual
-
-
-
-
-
-
-
-