INSTEON Range Extender Quick start guide

Range Extender
INSTEON
Brand
INSTEON
Model
Range Extender
Type
Quick start guide
INSTEON Range Extender
Quick Start Guide
INSTEON Range Extender
Set Button
Status LEDOpposite
Phase
Same
Phase
Installation
Plug the Range Extender into an
unswitched wall outlet.
Set Button
Placement
When extending the reach of your
INSTEON network, locate the Range
Extender near your INSTEON RF device.
b
c
d
a
1
To begin phase detection, quickly tap
the Range Extender’s set button four
times.
Briding Electrical Phases (Optional)
4x
2
Phases are
correctly bridged
Try a dierent
outlet; phases
are not correctly
bridged
X
X
SOLID
Inspect the status LED of a second
Range Extender or any Dual-Band
INSTEON device.
3
Exit phase detection by tapping the set
button on the Range Extender.
Learn More
For the complete Owner’s Manual, video
tutorials, product support and more, visit:
insteon.com/support
MANUAL
Rev 06.20.14
Protected under U.S. and foreign patents (see www.insteon.com/patents)
©2014 INSTEON
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

INSTEON Range Extender Quick start guide

Range Extender
INSTEON
Brand
INSTEON
Model
Range Extender
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents