Reznor VCT User manual

Brand: Reznor

Model: VCT

Type: User manual

This manual is also suitable for

Form Addendum VC & VP (4-16) Page 1

Form Addendum VC & VP (4-16)

Obsoletes Form Addendum VC & VP (12-14)

Alternate Reector Bracket Installation

Applies to: Tubular Infrared Models VC & VP

Standard Reector Bracket Installation

2 x SCREWS TIGHTENED TO

FIX REFLECTOR

LEAVE 1/8” MIN GAP TO ALLOW REFLECTOR

TO SLIDE

Reectors are xed at point “F” with a reector support bracket and reectors are held in position

with xing screws. Fixed and sliding joints alternate along the heater at the spacings indicated

on the individual heater assembly sheets.

Alternate Reector Bracket Installation

Alternate Bracket consists of:

• U-Bolt - (1) req’d

• Lockwasher - (2) req’d

• Hex nut - (2) req’d

• Bracket - (1) req’d

REFERENCES:

1) Installation / Operation / Maintenance manual for Model VPS 120V 60Hz Gas-Fired, Tubular,

Radiant, Low-Intensity Infrared Heater - 0114 OG POD Form I-VPS (Version C.3) Part No 270683.

2) Installation / Operation / Maintenance manual for Model VCS/VCT 120V 60Hz Gas-Fired,

Tubular, Radiant, Low-Intensity Infrared Heater - 243E-0914 Form I-VC Part No 270685.

Cap Screw

Flat Washer

Keps Nut

Cage Nut

Specications & illustrations subject to change without notice and without incurring obligations.

©Nortek Global HVAC, LLC 2016. All rights reserved.

All marks are the property of their respective organizations.

O’Fallon, MO I Printed in U.S.A. (4/16)

Doc No D300525 SKU 401E-0416 FORM Addendum VC&VP (4-16)

1

Reznor VCT User manual

Brand: Reznor

Model: VCT

Type: User manual

This manual is also suitable for

Download PDF

Related papers

Other documents