Reznor WSA2BD-D (3 Phase) Product information

Type
Product information

This manual is also suitable for

R
T3
T1
T2
S
C
COMPRESSOR
OUTDOOR
FAN MOTOR
THREE PHASE
FIELD SUPPLY
CAPACITOR
GROUNDING
LUG
HIGH PRES.
SWITCH
CONTACTOR
T3
L1
L2
L3
GL1
L2
L3
CCH
CCH
(If Equipped)
(If Equipped)
T2
T1
YELLOW/BLACK
BLUE
ORANGE
BLACK
YELLOW
RED
BLACK
Split System Air Conditioner (Outdoor Section) Three Phase
WIRING DIAGRAM
NOTES:
1. Disconnect all power before servicing.
2. For supply connections use copper conductors only.
3. For replacement wires use conductors suitable for 105 deg. C.
4. For supply wire ampacities and overcurrent protection, see unit rating plate.
5. Connect to 24 vac/40 va/class 2 circuit. See furnace/air handler installation
instructions for control circuit and optional relay/transformer kits.
1. Couper le courant avant de faire letretien.
2. Employez uniquement des conducteurs en cuivre.
710688A
05/08
FIELD WIRING
LEGEND:
LOW VOLTAGE
HIGH VOLTAGE
HPS
Compressor
Contacts
L3
T3
L2
S
C
R
Capacitor
Outdoor
Fan Motor
T2
L1
CCH
(If Equipped)
T1
Compressor
CC
CC - Contactor Coil
CCH - Crankcase Heater
HPS - High Pressure Switch
24 Volt Field
Connections
¢710688N¤
  • Page 1 1

Reznor WSA2BD-D (3 Phase) Product information

Type
Product information
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI