(1M) 9/10 Printed in U.S.A.
CH079
Gas Heated Door-type
Extended Hood
High Temperature Dishwasher
DH1T
DH1T GAS HEATED DOORTYPE
STANDARD FEATURES
• ENERGY STAR® Qualified
• Dual NSF listing as a dishwasher and
pot, pan, utensil washer
• Automatic tank fill
• Automatic drain valve
• Adjustable mode/time selector switch
• Door activated cycle start
• One gas heating system for boosting
the final rinse and tank heat
• Low-water tank heat protection
• 2-Hp pump motor
• Stainless steel pump impeller
• Door safety switch
• Interchangeable upper and lower spray arms
• Vented wash chamber design
• Detergent/chemical connection provisions
• Single point electrical connection (see chart)
• Vent fan control switch
SPECIFIER STATEMENT
Specified unit will be Champion Industries model
D-H1T door type extended hood, gas tank heat,
high temperature dishwashing machine.
Features include automatic tank fill, automatic drain
valve, 2 Hp drip-proof pump motor, gas tank heat,
interchangeable upper and lower spray arms, door
activated start cycle, dual NSF Certified as both
dishwasher and potwasher.
1 year parts and labor warranty.
OPTIONS & ACCESSORIES
Corner Model
Drain Tempering Kit
Project
Item No.
Quantity
Champion Industries, Inc.
3765 Champion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Gas
Dual Certified!
Gas Heated Door-type
Extended Hood
High Temperature Dishwasher
DH1T
Dimensions shown in inches [mm]
Details, Dimensions & Connections
Front View
Side View
Note: The booster and machine come fully interplumbed
complete with a blended phosphate water treatment
system, pressure regulating valve, water hammer arrestor,
ASME temperature and pressure relief valve, drain valve,
circulator pump, and temperature gauges installed and
ready for connection to your water supply.
Length between table connections: 25-3/4"
Shipping weight crated: 775 lbs.
Typical Table Construction
* Booster shown is the PMG100. Contact factory for
PMG60 drawings & electrical information.
Gas
2 HP
12-1/2"
[318]
11"
[279]
34"
[864]
27"
[686]
1A
3A
26-3/4"
[679]
10"
[254]
31-3/4"
[806]
26-1/2"
[673]
6" [152]
A A
2-11/16"
[68]
19-7/8"
[505]
1A
3A
TRACK CONFIGURED FOR STANDARD
STRAIGHT THROUGH OPERATION
TRACK CONFIGURED FOR OPTIONAL
Inside Tracks
CORNER OPERATION
6" [152] Min
Clearance
Min.
20-1/8"
[511]
87" [2,210]
Door
Up
92-1/2"
[2,350]
Door
Removal
3-5/8" [92]
6" [152]
Min.
Hatco
Gas Booster
Mod. # Pmg-100
2
4
8-1/2"
[216]
10-1/4"
[260]
27-1/2" [699]
63-1/2" [1,613]
13"
[330]
44-1/8" [1,121]
26" [660]
41" [1,041]
5
2
4
8-1/4"
[210]
24-5/8"
[625]
25-5/8"
[651]
2" [51]
Gas Booster
7-1/8" [181]
1B
5-3/4" [146]
1B
31-3/8"
[797]
25-7/16"
[646]
13-1/4"
[337]
25-1/4"
[641]
67-7/16"
[1,713]
20-3/4"
[527]
3B
19-5/8"
[498]
5
3B
20-1/8"
[511]
Inside Tracks
20-1/8"
[511]
6-3/8"
[162]
3B
1-1/4" [32] Roll
1-1/8"
[29]
2-1/8" [54]
7-1/4" [184]
20-7/8"
[530]
24-1/4"
[616]
2 HP
12-1/2"
[318]
11"
[279]
34"
[864]
27"
[686]
1A
3A
26-3/4"
[679]
10"
[254]
31-3/4"
[806]
26-1/2"
[673]
6" [152]
A A
2-11/16"
[68]
19-7/8"
[505]
1A
3A
TRACK CONFIGURED FOR STANDARD
STRAIGHT THROUGH OPERATION
TRACK CONFIGURED FOR OPTIONAL
Inside Tracks
CORNER OPERATION
6" [152] Min
Clearance
Min.
20-1/8"
[511]
87" [2,210]
Door
Up
92-1/2"
[2,350]
Door
Removal
3-5/8" [92]
6" [152]
Min.
Hatco
Gas Booster
Mod. # Pmg-100
2
4
8-1/2"
[216]
10-1/4"
[260]
27-1/2" [699]
63-1/2" [1,613]
13"
[330]
44-1/8" [1,121]
26" [660]
41" [1,041]
5
2
4
8-1/4"
[210]
24-5/8"
[625]
25-5/8"
[651]
2" [51]
Gas Booster
7-1/8" [181]
1B
5-3/4" [146]
1B
31-3/8"
[797]
25-7/16"
[646]
13-1/4"
[337]
25-1/4"
[641]
67-7/16"
[1,713]
20-3/4"
[527]
3B
19-5/8"
[498]
5
3B
20-1/8"
[511]
Inside Tracks
20-1/8"
[511]
6-3/8"
[162]
3B
1-1/4" [32] Roll
1-1/8"
[29]
2-1/8" [54]
7-1/4" [184]
20-7/8"
[530]
24-1/4"
[616]
2 HP
12-1/2"
[318]
11"
[279]
34"
[864]
27"
[686]
1A
3A
26-3/4"
[679]
10"
[254]
31-3/4"
[806]
26-1/2"
[673]
6" [152]
A A
2-11/16"
[68]
19-7/8"
[505]
1A
3A
TRACK CONFIGURED FOR STANDARD
STRAIGHT THROUGH OPERATION
TRACK CONFIGURED FOR OPTIONAL
Inside Tracks
CORNER OPERATION
6" [152] Min
Clearance
Min.
20-1/8"
[511]
87" [2,210]
Door
Up
92-1/2"
[2,350]
Door
Removal
3-5/8" [92]
6" [152]
Min.
Hatco
Gas Booster
Mod. # Pmg-100
2
4
8-1/2"
[216]
10-1/4"
[260]
27-1/2" [699]
63-1/2" [1,613]
13"
[330]
44-1/8" [1,121]
26" [660]
41" [1,041]
5
2
4
8-1/4"
[210]
24-5/8"
[625]
25-5/8"
[651]
2" [51]
Gas Booster
7-1/8" [181]
1B
5-3/4" [146]
1B
31-3/8"
[797]
25-7/16"
[646]
13-1/4"
[337]
25-1/4"
[641]
67-7/16"
[1,713]
20-3/4"
[527]
3B
19-5/8"
[498]
5
3B
20-1/8"
[511]
Inside Tracks
20-1/8"
[511]
6-3/8"
[162]
3B
1-1/4" [32] Roll
1-1/8"
[29]
2-1/8" [54]
7-1/4" [184]
20-7/8"
[530]
24-1/4"
[616]
Machine Load Amps
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
Minimum
Overcurrent
Protective
Device
208/60/1 15 20 20
240/60/1 14 20 20
208/60/3 8 15 15
240/60/3 7 15 15
480/60/3 4 15 15
575/60/3 3 15 15
Utilities
1
Electrical Connection
A Machine connection (See Box)
B Gas Booster connection requires 15 Amps @ 120/60/1
2
Hot Water
3/4” NPT hot water 140°F for 40°F rise booster.
3/4” NPT hot water 110°F for 70°F rise booster.
Flow pressure 20-22 psi.
3
Drain
A 2” OD machine connection
B 3/4” NPT relief valve to open drain
4
Natural Gas Connection
40°F rise - 58,000 BTU/hr.
70°F rise - 105,000 BTU/hr.
PMG-60 requires 1/2” NPT.
PMG-100 requires 3/4” NPT.
5
Gas Flue Exhaust
4” Dia. Rear of booster
Gas Heated Door-type
Extended Hood
High Temperature Dishwasher
DH1T
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
SPECIFICATIONS
Capacities
Wash tank US gal. 9
Dishwasher Mode:
NSF Rated Racks per hr. 49/29
Pot/Pan Washer Mode:
NSF Rated Racks per hr. 19/10
Motor horsepower
2
Water consumption
Pot/Pan Dishwasher
Washer Mode Mode
Gal. per rack US gal. 1.34 0.9
Gal. per hr. (max. use) US gal. 36 44
Temperature°F/°C
Wash 150/66
Rinse 180/82
Heating
Gas PMG60 (40°F rise) 58,000 BTU/hr
PMG100 (70°F rise) 105,000 BTU/hr
Time Cycle in Seconds
Dishwasher Mode Pot/Pan Washer Mode
Wash 44 96 Wash 156 336
Rinse 10 10 Rinse 13 13
Dwell 14 14 Dwell 11 11
Total 68 120 Total 180 360
Warning: Plumbing and electrical connection should be made by qualified
personnel who will observe all the applicable plumbing, sanitary and safety codes
and the National Electrical Code.
Warning: Gas burner intake air and exhaust venting required in accordance with
local codes. Exhaust must be vented outside.
Note: Specify vent location option on booster when ordering.
Dimensions shown in inches [mm]
Straight-Through
Operation
Corner Configuration
Plan View
Gas
2 HP
12-1/2"
[318]
11"
[279]
34"
[864]
27"
[686]
1A
3A
26-3/4"
[679]
10"
[254]
31-3/4"
[806]
26-1/2"
[673]
6" [152]
A A
2-11/16"
[68]
19-7/8"
[505]
1A
3A
TRACK CONFIGURED FOR STANDARD
STRAIGHT THROUGH OPERATION
TRACK CONFIGURED FOR OPTIONAL
Inside Tracks
CORNER OPERATION
6" [152] Min
Clearance
Min.
20-1/8"
[511]
87" [2,210]
Door
Up
92-1/2"
[2,350]
Door
Removal
3-5/8" [92]
6" [152]
Min.
Hatco
Gas Booster
Mod. # Pmg-100
2
4
8-1/2"
[216]
10-1/4"
[260]
27-1/2" [699]
63-1/2" [1,613]
13"
[330]
44-1/8" [1,121]
26" [660]
41" [1,041]
5
2
4
8-1/4"
[210]
24-5/8"
[625]
25-5/8"
[651]
2" [51]
Gas Booster
7-1/8" [181]
1B
5-3/4" [146]
1B
31-3/8"
[797]
25-7/16"
[646]
13-1/4"
[337]
25-1/4"
[641]
67-7/16"
[1,713]
20-3/4"
[527]
3B
19-5/8"
[498]
5
3B
20-1/8"
[511]
Inside Tracks
20-1/8"
[511]
6-3/8"
[162]
3B
1-1/4" [32] Roll
1-1/8"
[29]
2-1/8" [54]
7-1/4" [184]
20-7/8"
[530]
24-1/4"
[616]
2 HP
12-1/2"
[318]
11"
[279]
34"
[864]
27"
[686]
1A
3A
26-3/4"
[679]
10"
[254]
31-3/4"
[806]
26-1/2"
[673]
6" [152]
A A
2-11/16"
[68]
19-7/8"
[505]
1A
3A
TRACK CONFIGURED FOR STANDARD
STRAIGHT THROUGH OPERATION
TRACK CONFIGURED FOR OPTIONAL
Inside Tracks
CORNER OPERATION
6" [152] Min
Clearance
Min.
20-1/8"
[511]
87" [2,210]
Door
Up
92-1/2"
[2,350]
Door
Removal
3-5/8" [92]
6" [152]
Min.
Hatco
Gas Booster
Mod. # Pmg-100
2
4
8-1/2"
[216]
10-1/4"
[260]
27-1/2" [699]
63-1/2" [1,613]
13"
[330]
44-1/8" [1,121]
26" [660]
41" [1,041]
5
2
4
8-1/4"
[210]
24-5/8"
[625]
25-5/8"
[651]
2" [51]
Gas Booster
7-1/8" [181]
1B
5-3/4" [146]
1B
31-3/8"
[797]
25-7/16"
[646]
13-1/4"
[337]
25-1/4"
[641]
67-7/16"
[1,713]
20-3/4"
[527]
3B
19-5/8"
[498]
5
3B
20-1/8"
[511]
Inside Tracks
20-1/8"
[511]
6-3/8"
[162]
3B
1-1/4" [32] Roll
1-1/8"
[29]
2-1/8" [54]
7-1/4" [184]
20-7/8"
[530]
24-1/4"
[616]
2 HP
12-1/2"
[318]
11"
[279]
34"
[864]
27"
[686]
1A
3A
26-3/4"
[679]
10"
[254]
31-3/4"
[806]
26-1/2"
[673]
6" [152]
A A
2-11/16"
[68]
19-7/8"
[505]
1A
3A
TRACK CONFIGURED FOR STANDARD
STRAIGHT THROUGH OPERATION
TRACK CONFIGURED FOR OPTIONAL
Inside Tracks
CORNER OPERATION
6" [152] Min
Clearance
Min.
20-1/8"
[511]
87" [2,210]
Door
Up
92-1/2"
[2,350]
Door
Removal
3-5/8" [92]
6" [152]
Min.
Hatco
Gas Booster
Mod. # Pmg-100
2
4
8-1/2"
[216]
10-1/4"
[260]
27-1/2" [699]
63-1/2" [1,613]
13"
[330]
44-1/8" [1,121]
26" [660]
41" [1,041]
5
2
4
8-1/4"
[210]
24-5/8"
[625]
25-5/8"
[651]
2" [51]
Gas Booster
7-1/8" [181]
1B
5-3/4" [146]
1B
31-3/8"
[797]
25-7/16"
[646]
13-1/4"
[337]
25-1/4"
[641]
67-7/16"
[1,713]
20-3/4"
[527]
3B
19-5/8"
[498]
5
3B
20-1/8"
[511]
Inside Tracks
20-1/8"
[511]
6-3/8"
[162]
3B
1-1/4" [32] Roll
1-1/8"
[29]
2-1/8" [54]
7-1/4" [184]
20-7/8"
[530]
24-1/4"
[616]
Gas Heated Door-type
Extended Hood
High Temperature Dishwasher
DH1T
DH1T GAS HEATED DOORTYPE
Corner Configuration
D-H1T Corner Unit
Showing 90° Mounted
Control Panel
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
Gas
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
-
1
-
2
-
3
-
4
