Operating Instructions
Home Theater Audio System
Model No. SC-HTR310
SC-HTR210
RQTX0151-2B
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
Dear customer
“EB” on the packaging indicates the United Kingdom.
Note
EB E
The illustration shows SC-HTR310.
GM
SC-HTR310_210 (RQTX0151-2B).indd 1 4/16/2008 1:44:29 PM
RQTX0151
2
After you have installed the rack, attach the
glass top panel, shelf and glass doors.
In this manual, illustrations of SC-HTR310 are used to represent this system unless otherwise mentioned.
Before use
Setting up your Home Theater system
Installing the rack
(
pages 10 to 15)
Step
1
Connecting the television and DVD player
(
page 16)
Step
2
(Peripheral equipment and cables are not included unless otherwise mentioned.)
Recommended TV size:
SC-HTR310
: 50 inches or less
SC-HTR210
: 42 inches or less
Basic connection
(
page 16)
Connect with an HDMI cable for high-quality audio and video.
This connection requires HDMI terminals on both the television and
the DVD recorder. (
page 17)
Enjoying movies and music
(
pages 24 to 27)
Step
3
Enjoy surround sound with DVDs, TV, and
other sources.
This system has built-in speakers.
Do not connect other speakers with the front speakers, center
speaker and subwoofer.
If you connect other speakers, the sound will not be produced with
proper characteristics and malfunction may occur.
Setting up your Home Theater system
SC-HTR310_210 (RQTX0151-2B).indd 2 4/16/2008 1:44:29 PM
RQTX0151
3
Before use
Connection
Play
Reference
Setting up your Home Theater system ......... 2
Caution for AC Mains Lead ............................ 4
Safety precautions ......................................... 5
Supplied accessories ..................................... 6
Control guide .................................................. 7
Remote control preparation .......................... 9
Installing and assembling the rack ............. 10
Home Theater connections ......................... 16
Basic connections ............................................... 16
Connecting equipment with HDMI terminal (TV,
DVD recorder, etc.) ............................................. 17
Connecting with digital terminal-mounted
equipment .......................................................... 18
Connecting with VCR ..........................................
19
Other connections ........................................ 20
Connecting a set top box (cable or satellite) ... 20
Connecting a combination DVD recorder/VCR ...
21
AC mains supply connection ...................... 22
Checking speaker output ............................. 23
Enjoying movies and music ........................ 24
Sound field .......................................................... 26
Using the VIERA Link “HDAVI Control
TM
” .. 28
Functions and settings ................................ 29
Using “WHISPER MODE SURROUND” ............. 29
Using “GAME” .................................................... 29
Muting .................................................................. 29
Adjusting speaker output .................................. 29
REAL CENTER function ..................................... 30
Adjusting sound quality .................................... 30
Adjusting the balance ........................................ 30
Reducing standby power consumption
(Standby mode) .................................................. 31
Setting VIERA Link “HDAVI Control” to “OFF ”
...
31
Adjusting the time lag by delaying audio
output when pictures on TV arrives
after sounds ........................................................ 31
Switching between dual sounds ....................... 32
Clear audio at low volume ................................. 32
Switching the attenuator ................................... 32
Setting input signals .......................................... 33
Reset (factory settings) ..................................... 33
When other equipment (mini component
system, AV amp, etc.) manufactured by
Panasonic operate ............................................. 34
Error messages ............................................ 35
Specifications ............................................... 35
Troubleshooting guide ................................. 36
Digital signals that can be played
on this system .............................................. 37
Glossary ........................................................ 38
Maintenance .................................................. 38
Table of contents
Before useConnectionPlay
Reference
SC-HTR310_210 (RQTX0151-2B).indd 3 4/16/2008 1:44:31 PM
RQTX0151
4
Caution for AC Mains Lead
(For United Kingdom)
(“EB” area code model only)
For your safety, please read the following text
carefully.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark
on the body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME
THEN THE FUSE SHOULD BE REMOVED
AND THE PLUG CUT OFF AND DISPOSED OF
SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring
code as stated below.
If in any doubt please consult a qualified electrician.
WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E, BY THE EARTH SYMBOL OR
COLOURED GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type
of AC mains plug (figures A and B). Confirm the AC
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
Before use
Caution for AC Mains Lead
IMPORTANT
The wires in this mains lead are coloured in
accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the
coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured Blue must be connected
to the terminal which is marked with the letter N or
coloured Black or Blue.
The wire which is coloured Brown must be connected
to the terminal which is marked with the letter L or
coloured Brown or Red.
Figure A
Figure B
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
Fuse cover
SC-HTR310_210 (RQTX0151-2B).indd 4 4/16/2008 1:44:33 PM
RQTX0151
5
Before use
Safety precautions
Safety precautions
Set the system up on an even surface away from
direct sunlight, high temperatures, high humidity,
and excessive vibration. These conditions can
damage the system and other components, thereby
shortening the system’s service life.
Do not hang from or climb on the system. This may
result in serious injury.
Place the television properly on the system. Use the
Fall-prevention band to prevent the television from
falling over and causing serious damage or injury.
Do not place items heavier than the recommended
weight on the system or the shelves.
Do not use high voltage power sources. This can
overload the system and cause a fire.
Do not use a DC power source. Check the source
carefully when setting the system up on a ship or
other place where DC is used.
Ensure the AC mains lead is connected correctly and
not damaged. Poor connection and lead damage
can cause fire or electric shock. Do not pull, bend, or
place the system on the lead.
Grasp the plug firmly when unplugging the lead.
Do not move the system if AC mains lead is still
connected to socket outlet. Pulling the AC mains lead
can cause electric shock.
Do not handle the plug with wet hands. This can
cause electric shock.
Remove AC mains plug from socket outlet when not
using for a long period.
Do not let metal objects fall inside the system. This
can cause electric shock or malfunction.
Do not let liquids get into the system. This can
cause electric shock or malfunction. If this occurs,
immediately disconnect the system from the power
supply and contact your dealer.
Do not spray insecticides onto or into the system.
They contain flammable gases which can ignite if
sprayed into the system.
Do not attempt to repair this system by yourself. If
sound is interrupted, indicators fail to light, smoke
appears, or any other problem that is not covered in
these instructions occurs, disconnect the AC mains
lead and contact your dealer or an authorised service
center. Electric shock or damage to the system can
occur if the system is repaired, disassembled or
reconstructed by unqualified persons.
Extend operating life by disconnecting the system
from the power source if it is not to be used for a long
time.
Glass doors
Protect the doors from scratching.
Take care not to get your fingers caught when
opening and closing the doors.
Do not touch the doors if they crack. Consult your
dealer for immediate replacement.
Placement
Voltage
AC mains lead protection
Foreign matter
Service
SC-HTR310_210 (RQTX0151-2B).indd 5 4/16/2008 1:44:34 PM
RQTX0151
6
2 Glass doors
1 AC mains lead
For the United Kingdom
(K2CT3CA00004)
2 Batteries 1 Remote control
(N2QAYB000288)
2 Shelves
SC-HTR310
:
(RKQ2G0004-K)
1 Shelf
SC-HTR210
:
(RKQ2G0005-K)
8 Moulded dowels
SC-HTR310
4 Moulded dowels
SC-HTR210
(RMQ1649)
SC-HTR310
: 1 x Left (RXQ1607)
1 x Right (RXQ1608)
SC-HTR210
: 1 x Left (RXQ1612)
1 x Right (RXQ1612A)
1 Glass top panel
SC-HTR310
: (RXQ1618)
SC-HTR210
: (RXQ1619)
4 Caster stoppers (TBLB3008)
Packing plan
SC-HTR310 SC-HTR210
Sales and Support Information
(For the United Kingdom and Republic of Ireland)
Customer Care Centre
For customers within the UK: 0844 844 3852
For customers within the Republic of Ireland: 01 289 8333
Visit our website for product information
E-mail: [email protected]
•
•
•
•
Direct Sales at Panasonic UK
Order accessory and consumable items for your product with
ease and confidence by phoning our Customer Care Centre
Monday-Thursday 9:00am-5:30pm, Friday 9:30am-5:30pm
(Excluding public holidays).
Or go on line through our Internet Accessory ordering
application at www.panasonic.co.uk.
Most major credit and debit cards accepted.
All enquiries transactions and distribution facilities are
provided directly by Panasonic UK Ltd.
It couldn’t be simpler!
Also available through our Internet is direct shopping for a
wide range of finished products, take a browse on our website
for further details.
Interested in purchasing an extended guarantee?
Please call 0870 240 6284 or visit our website
www.panasonic.co.uk/guarantee.
•
•
•
•
•
•
Please check and identify the supplied accessories.
Use numbers when asking for replacement parts.
(Product numbers correct as of March 2008. These may be subject to change.)
Supplied accessories
Before use
Supplied accessories
Supplied accessories for amplifier
Supplied accessories for rack
Left side
Right side
Shelf
Other
supplied
accessories
Glass doors
Batteries
Remote
control
Rack
Shelf
Glass doors
Batteries
Remote control
Rack
Other
supplied
accessories
Glass top panel Glass top panel
(Dotted line)
(Dotted line)
For continental Europe
and Malaysia
(K2CQ2CA00007)
2 Screws
(XTW4+16AFJK)
AC mains lead
(For the United
Kingdom only)
AC mains
lead
(For the
United
Kingdom
only)
SC-HTR310_210 (RQTX0151-2B).indd 6 4/16/2008 1:44:39 PM
RQTX0151
7
SC-HTR310
SC-HTR210
This system
Control guide
(Front view)
(Rear view)
(Front view)
(Rear view)
Before use
Control guide
Other
supplied
accessories
Subwoofer
(left)
Center speaker Front speaker (right)
Subwoofer
(right)
Front speaker (left)
Rear panel Amplifier
Cut-outs Cut-outs
Rear panel
Amplifier
Cut-outs
Subwoofer
(left)
Center speaker Front speaker (right)
Subwoofer
(right)
Front speaker (left)
Control panel
(display)
Caster
Control panel
(display)
Caster
SC-HTR310_210 (RQTX0151-2B).indd 7 4/16/2008 1:44:42 PM
Speaker terminalsAC inlet (
page 22) Digital input terminal (
pages 17 to 21 and 28)
Audio input terminal
(
pages 16, 17, 19 and 21)
HDMI terminal (
pages 17 and 28)
RQTX0151
8
VOLUME
WHISPER MODE
SURROUND
INPUT
SELECTO
R
Speaker terminals
The speakers are already connected. Do not touch the connectors unless absolutely necessary.
If the connectors become disconnected, refer to the illustrations below for connection.
Connector connection How to attach the connectors
Make sure the colour on the connector
indicates the same as corresponding
terminal and insert the connector straight all
the way.
DIGITAL : Dolby Digital sources
DTS : DTS sources
VS : When Dolby Virtual Speaker is working
SFC : When you are using an SFC mode
When Dolby Pro Logic
decoder is being
used
(When using Dolby Virtual Speaker on
2 channel stereo source)
Control panel
Control guide
For adjusting volume (
page 24)
Standby/on switch
(
pages 22 to 24)
Standby indicator
(
page 22)
“INPUT SELECTOR”
switch (
page 24)
Before use
Control guide
Display
When input signal is fixed to
DTS (
page 33)
PCM
DIGITAL DTS
PL
SFC
VS
DIGITAL INPUT
Digital surround signal/Sound field (
below, pages 26 and 27)
When input signal is digital
When input signal is fixed to PCM (
page 33)
General display
Amplifier
Exhaust hole (Cooling fan)
Green
White
Red
Purple
White
Red
Purple
Green
For using “WHISPER MODE SURROUND”
(
page 29)
Terminal block
Connector
SC-HTR310_210 (RQTX0151-2B).indd 8 4/16/2008 1:44:47 PM
RQTX0151
9
Standby/on button (
pages 23 to 25)
Input mode and remote control mode
buttons ( pages 24, 25 and 34)
Adjusting speaker output
( pages 23 and 29)
Test signal output (
page 23)
For adjusting the volume
( pages 23 to 25)
For using “WHISPER MODE
SURROUND” (
page 29)
Muting ( page 29)
For returning to the previous menu
( pages 29 to 34)
For using “GAME”
(
page 29)
To enter setup mode
(
pages 29 to 34)
For adjusting settings/For activating
settings ( pages 29 to 34)
For selecting or cancelling
Dolby Virtual Speaker,
Dolby Pro Logic
and SFC mode
(
pages 26 and 27)
“INPUT SELECTOR”
switch (
page 24)
Remote control
VOLUME
WHISPER MODE
SURROUND
INPUT
SELECTOR
Remote control preparation
Inserting the batteries
Using the remote control
Do not place an object between the signal sensor and the
remote control.
Do not place the signal sensor under direct sunlight or the strong
light of a fluorescent lamp.
Keep the transmission window and the system’s sensor free
from dust.
•
•
•
(R6/LR6, AA)
Remote control signal sensor
Press on the tab to open.
Within 7 meters at the front
(actual distance depends on
the angle)
Transmission window
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by
the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Do not use rechargeable type batteries.
Do not heat or expose to flame.
Do not leave the batteries in an automobile exposed to direct sunlight for a long period of time with doors and
windows closed.
•
•
•
Insert so the poles (+ and –) match those in the
remote control.
Note
Do not:
•
mix old and new batteries.
•
use different types at the same time.
•
take apart or short circuit.
•
attempt to recharge alkaline or manganese batteries.
•
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which
can severely damage the remote control.
Remove the batteries if the remote control is not going to be
used for a long period of time. Store in a cool, dark place.
Before use
Control guide/Remote control preparation
SC-HTR310_210 (RQTX0151-2B).indd 9 4/16/2008 1:44:49 PM
RQTX0151
10
Installation
Setup example
This system This system This system
At least 2 people are necessary for installation.
Use a Phillips-head screwdriver. (Do not use a powered screwdriver.)
Choose a stable location for installation.
Handle the glass top panel and glass doors with enough care.
Make sure to place the rack on a flat, stable surface so there is no danger of it falling over. Take enough safety
measures to prevent the television from falling down.
You can install this system so that it is flush with the wall at either the sides or back, but you will require some space
for working during setup and connection.
Do not place in front of curtains as they may obstruct the system’s exhaust hole.
Avoid pressing on the speaker nets during installation.
If the surface of the wooden floor is soft, the caster mark may remain.
See page 11 for removing casters.
•
•
•
•
•
•
Installing and assembling the rack
Connection
Installing and assembling the rack
Glass door assembly (
page 15)
Speaker net
Shelf assembly (
page 12)
Caution
Use the speakers only with the recommended system. Failure to do so can damage the amplifier and speakers, and
can cause fire.
Consult a qualified service person if damage occurs or if performance worsens.
•
•
Installing each
equipment
Glass top
panel
assembly
(
page 12)
Setting the caster
stoppers
(
page 14)
(DVD player/Blu-ray Disc player/DVD recorder
page 13)
(TV
page 13)
SC-HTR310_210 (RQTX0151-2B).indd 10 4/16/2008 1:44:52 PM
RQTX0151
11
Removing casters
How to lift the rack
Lift the back side of the
top board and insert your
hand to the bottom of the
back side.
Insert your hand to the
bottom of the front side.
Lift the rack horizontally
using your both hands.
Remove casters at unstable places. (thick-piled carpet,
etc.)
Spread soft cloth on the floor and tip the rack back to
remove the casters.
Hold and pull to remove.
At least 2 people are necessary for removing casters.
Make sure that at least 2 people hold the bottom plate
when moving the rack after removing the casters. See the
following instructions about how to lift the rack.
Do not put anything on and in the rack when removing
casters. Do not put the included glass top panel either.
•
•
•
•
•
•
Connection
Installing and assembling the rack
(Bottom plate)
Hold and pull.
Caster
Front side
Back side
Soft cloth, etc.
Front side
Back side
SC-HTR310_210 (RQTX0151-2B).indd 11 4/16/2008 1:45:02 PM
RQTX0151
12
Shelf assembly
Installing and assembling the rack
Glass top panel assembly
(Side view)
Adjust the glass top panel (included)
to protrusion.
The glass top panel has the front side and back
side. Face up the front side with the sticker.
The nonslip sheet has been put on the top panel of
the rack. Do not remove the sheet when installing
the glass top panel.
•
•
Put it down slowly adjusting to the
top panel of the rack.
Note
Lift up and down slowly not to make an impact on the glass.
1
2
Nonslip
sheet
Glass top panel
Protrusion
Sticker
Top panel of the rack
Glass top panel
Top panel of the rack
Insert the moulded dowel (included) into
the dowel hole on one side.
Insert the shelf (included) with a slope
and set it adjusting the shelf groove to the
moulded dowel.
Hold the shelf, insert the moulded dowel
into the dowel hole on the other side. Set
the shelf horizontally.
The height of the shelf can be adjusted at 3 different
levels.
Change the position of the dowels to move the shelf up or
down.
Insert the moulded dowel not to lose even when the shelf
is not set.
•
•
•
1
SC-HTR310 SC-HTR210
3
2
Hole
Groove (Under the shelf)
Shelf
UNIT: mm
Dowel position Upper Middle Lower
Compartment
H
Upper shelf 101 131 161
Lower shelf 101 71 41
W 448 (both L and R)
D 354
UNIT: mm
Dowel position Upper Middle Lower
Compartment
H
Upper shelf 98 128 158
Lower shelf 101 71 41
W 700
D 354
Moulded dowel
Connection
Installing and assembling the rack
SC-HTR310_210 (RQTX0151-2B).indd 12 4/16/2008 1:45:05 PM
RQTX0151
13
Installing the television
(Please also refer to the television’s operating instructions.)
Installing a DVD player/Blu-ray Disc player/DVD recorder or other equipment on
the shelf
(Please also refer to the other equipment’s operating instructions.)
1
Press the cut-out on the back panel using
your thumb etc. with force to remove it for
wiring after installing the equipment.
Refer to pages 16 to 21 for connections with other
equipment.
If the operating instructions of the equipment require heat
release or ventilation, remove the cut-out on the back
panel to secure ventilation.
When setting equipment with the exhaust hole on the side,
follow the operating instruction of the equipment before
setting.
Pull out the bundled cords of stored
equipment from the cut-outs for
connection.
•
•
•
2
Shelf top (dimension
): 348 mm (Maximum depth of equipment when
the big cut-outs part on the back panel is
opened)
Shelf top (dimension
): 255 mm (Maximum depth of equipment when
the small cut-outs part on the back panel is
opened)
The lowest level (on the floor panel)
(dimension
):
255 mm (Maximum depth of equipment)
Note
Do not put equipment weighing more than 12 k
g
on
the upper shelf or more than 20 k
g
on the lower shelf.
Image interference may occur if you put a DVD
recorder, etc. on the upper shelf. Put it on the lower
shelf if this occurs.
Depending on the equipment to install, the cables
may not be connected.
To install the equipment, adjust the height of the shelf
to the position where the cables come out.
If you set on the lowest level (on the floor panel), the
equipment with long depth may not be set properly or
the equipment cord may not be taken out.
When installing equipment, refer to the table for “Shelf
assembly” on page 12.
•
•
•
•
•
(Rear view)
Cut-outs
Push the black-circled
point.
Shelf top
(Side view in cross section)
Place the television (with stand attached)
in the center of the rack.
Recommended:
SC-HTR310
: 50 inches or less
SC-HTR210
: 42 inches or less
Television
stand
Note
Lift the television when placing it on the rack. Dragging it may
damage the top panel.
(For details, refer to the television’s operating instructions.)
If the television stand adheres to the glass top panel too tight to
remove, lift the stand inserting a flat and thin object. This may help
removing the stand.
Install the rotary television stand not to run over the rack even if it
rotates.
•
•
•
(Front view)
The lowest level (on the floor panel)
Small cut-outs
Big cut-outs
Connection
Installing and assembling the rack
SC-HTR310_210 (RQTX0151-2B).indd 13 4/16/2008 1:45:07 PM
RQTX0151
14
Setting the caster stoppers
Stabilising the television
Attach the television to the rack to prevent it from falling over.
Fixing to the rack
Attach the fall-prevention band etc. supplied with TV using
the included screws as illustrated at right. (If the fall-pre-
vention band is not supplied with TV, use a commercially
available band to fix.)
Attach the fall-prevention band to the prepared hole in the
center of the underside of the top board.
If the hole is not positioned at a suitable place, drill
approx. 2 mm hole on the underside and attach the band
with the screw.
If you fasten the screw too tightly, it goes around in circles
and the TV cannot be fixed.
Fixing to the wall
Use commercially available screws, strong string or chain
suitable for materials of the wall or pillar to fix to the solid
parts.
Walls and pillars must be strong enough to support the
weight of TV. Ask installation personnel for more informa-
tion.
Fix 2 parts at both left and right.
•
•
•
•
•
(Setup example)
The illustration is an example.
The shape may differ from the actual product.
(Setup example)
Set the caster stoppers (included) under
the casters to fix this system and prevent
from moving.
When setting the caster stoppers, match the front side of
caster with the arrow of the caster stopper.
Lift the rack to remove caster stoppers. See page 11
about how to lift the rack.
•
•
(Caster stopper position)
SC-HTR310 SC-HTR210
Set the caster stoppers under 4 casters circled with the
dotted line of figure below.
Connection
Installing and assembling the rack
Installing and assembling the rack
Prepared
screw hole
Fall-prevention
band
Front
Caster stopper
Arrow
Front side
(Bottom side)
Front side
(Bottom side)
Screw (included)
SC-HTR310_210 (RQTX0151-2B).indd 14 4/16/2008 1:45:10 PM
RQTX0151
15
Glass door assembly
Remove 4 screws from the glass holder
using a Phillips-head screwdriver and
take out the board.
Before taking out the board, remove the tape fixing the
glass holder.
Use the Phillips-head screwdriver that matches the screw
size.
Insert the glass door (included) to the
glass holder firmly and tighten
the 2 screws in front tentatively.
The illustration at right shows how to fix the left glass door.
One side of the magnet catch has a hole.
This is the inner side of the glass.
The slippage prevention sheet is pasted on the glass
holder inserting part on the surface of the glass door.
Fix as it is.
Close the glass door to adjust the height
and gap on both sides. Open the glass
door so it does not misalign and tighten
2 screws in front with the Phillips-head
screwdriver.
Tighten 2 screws at the back firmly.
Install the other glass door in the same way.
•
•
•
•
•
•
1
2
3
4
Board
Glass
holder
Magnet
catch
Hole
Slippage prevention sheet
Phillips-head
screwdriver
Screw
Screw
Screw
Screw
Inner side
of glass
Screw
Inner side
of glass
Inner side
of glass
Phillips-head
screwdriver
Phillips-head
screwdriver
Screw
Connection
Installing and assembling the rack
SC-HTR310_210 (RQTX0151-2B).indd 15 4/16/2008 1:45:12 PM
RQTX0151
16
Basic connections
(For the United Kingdom and continental Europe)
Connection
Home Theater connections
Reduce the volume on the television and select “TV ” after you have done connections as
above if you want to use this system.
TV
Audio out
R L
Use this connection
so audio from the
equipment can be
heard through the
television’s speakers
even if this system is
in standby mode.
AUDIO IN
Video
cable
Audio
cable
Amplifier
DVD player etc.
VIDEO
OUT
AUDIO
OUT
Stereo phono cable (not included)
Connection cable
Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.•
Home Theater connections
Connect the video
directly from the
other equipment to
the television.
VIDEO IN
21-pin scart cable (not included)
AV
AV
21-Pin scart cable
connection also
possible.
21-Pin scart cable
connection also
possible.
(For the United Kingdom and
continental Europe)
(For the United Kingdom
and continental Europe)
SC-HTR310_210 (RQTX0151-2B).indd 16 4/16/2008 1:45:14 PM
RQTX0151
17
Turn off all components before making any connections.
To connect equipment, refer to the appropriate operating
instructions.
•
•
Connection
Home Theater connections
Audio
cable
HDMI cable notes
Use a Panasonic HDMI cable for best results.•
HDMI cable (not included) Optical fibre cable (not included)
Connecting the optical
fibre cable
Note the
shape and fit
it correctly
into the
terminal.
Do not
bend!
Connecting equipment with HDMI terminal (TV, DVD recorder, etc.)
Connection cable
HDMI input
Digital audio
out (optical)
TV
Blu-ray Disc player/DVD
recorder, etc.
HDMI
Video/Audio out
Make the connection either
or
according to
the suitability for your equipment.
Amplifier
Audio out
R L
Stereo phono cable (not included)
SC-HTR310_210 (RQTX0151-2B).indd 17 4/16/2008 1:45:16 PM
RQTX0151
18
Home Theater connections
Connecting the optical fibre
cable
Note the shape
and fit it
correctly into the
terminal.
Do not
bend!
Optical fibre cable (not included)
Connecting with digital terminal-mouted equipment
Connection cable
Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.•
TV
Digital audio
out (optical)
Connect the video
directly from the
other equipment to
the television.
VIDEO IN AUDIO IN
Use this connection
so audio from the
equipment can
be heard through
the television’s
speakers even if
this system is in
standby mode.
Video cable
Audio
cable
Amplifier
DVD player etc.
Digital audio out
(optical)
VIDEO OUT
AUDIO OUT
Coaxial cable (not included)
Digital audio out
(coaxial)
Connection
Home Theater connections
Make the connection either
or
according to the suitability for your
equipment.
SC-HTR310_210 (RQTX0151-2B).indd 18 4/16/2008 1:45:19 PM
RQTX0151
19
Turn off all components before making any connections.
To connect equipment, refer to the appropriate operating
instructions.
•
•
Optical fibre cable (not included)
Connection
Home Theater connections
Stereo phono cable (not included)
Connecting the optical fibre
cable
Note the shape
and fit it
correctly into the
terminal.
Do not
bend!
Connecting with VCR
Connection cable
Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.•
TV
Connect the video
directly from the
other equipment to
the television.
VIDEO IN AUDIO IN
Use this connec-
tion so audio from
the equipment can
be heard through
the television’s
speakers even if
this system is in
standby mode.
Video cable
Audio
cable
Amplifier
VCR etc.
VIDEO OUT
AUDIO OUT
Digital audio
out (optical)
R L
Audio out
SC-HTR310_210 (RQTX0151-2B).indd 19 4/16/2008 1:45:20 PM
RQTX0151
20
Connecting the optical fibre
cable
Note the
shape and fit it
correctly into
the terminal.
Do not bend!
Connection cable
Optical fibre cable (not included)
Connecting a set top box (cable or satellite)
Connect the video
directly from the
other equipment to
the television.
VIDEO IN
Use this
connection so
audio from the
equipment can
be heard through
the television’s
speakers even if
this system is in
standby mode.
AUDIO IN
TV
Video
cable
Audio
cable
VIDEO
OUT
AUDIO
OUT
Cable box or
satellite receiver, etc.
Digital
audio
out
(optical)
Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.•
Amplifier
DVD player etc.
Digital audio out
(coaxial)
Digital audio
out (optical)
Connection
Other connections
Other connections
Coaxial cable (not included)
SC-HTR310_210 (RQTX0151-2B).indd 20 4/16/2008 1:45:22 PM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
Panasonic SCHTR310 Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Panasonic SCHTR210 Owner's manual
-
-
-
-
-
-
-
-
-
Other documents
-
Philips 28/32 DW 6557 User manual
-
LG DH6530TK Installation guide
-
LG DH3140S Owner's manual
-
-
LG DH4430P User guide
-
Sanyo SX-HT120F User manual
-
Sharp AN-PR1500H Operating instructions
-
Legrand Universal 4K HDMI Adapter Ring Owner's manual
-
PyleHome PT592A User manual
-
Sharp AN-PR1000H Operating instructions