Electrolux GA60LV Quick start guide

Brand: Electrolux

Model: GA60LV

Type: Quick start guide

Electrolux GA60LV is a versatile dishwasher that offers a range of features to make dishwashing easier and more efficient. With its intuitive controls, you can select from various programs tailored to different types of loads, including eco-friendly and time-saving options. The dishwasher also features a delay start function, allowing you to schedule your dishes to be washed at a more convenient time. Additionally, the XtraDry and XtraHygiene options ensure your dishes are sparkling clean and hygienically washed.

Brief instructions

82 3 4 5 6 7 9

1. On/off button 6. TimeSaver button

2. Display 7. XtraDry button

3. Delay button 8. XtraHygiene button

4. Program button 9. Indicators

5. MyFavourite button

Programme Degree of soil, type of load

P1 ECO

• Normal soil

• Crockery and cutlery

P2 AutoSense

• All

• Crockery, cutlery, pots and pans

P3 Pro

• Heavy soil

• Crockery, cutlery, pots and pans

P4 Quick 30 Min.

• Fresh soil

• Crockery and cutlery

P5 Gläser

• Normal or light soil

• Delicate crockery and glassware

P6 ExtraSilent

• Normal soil

• Crockery and cutlery

Indicators Description

Salt indicator. It is always off while the programme operates.

Rinse aid indicator. It is always off while the programme

operates.

End indicator.

OPTIONS OPERATING THE APPLIANCE

Starting programme Starting programme with Delay Start

1. Press On/off.

2. Press

until the display shows the number

of the programme you want to start.

3. Set the applicable options.

4. Close the appliance door to start the programme.

1. Set a programme.

2. Press

until the display shows the delay time.

3. Close the appliance door to start the countdown.

When the countdown is completed,

the programme starts.

Cancelling programme Cancelling Delay Start countdown

Press until the appliance is

in programme selection mode.

Make sure that there is detergent in the detergent

container before starting new programme.

Press until the appliance is in programme

selection mode. The countdown stops.

End of the programme Opening door during operation

1. Press On/off or wait 5 minutes for Auto Off function

to automatically deactivate the appliance.

2. Close the water tap.

• When you open the door, the running programme

stops.

• When you close the door, the appliance continues

from the point of interruption.

• If the door stays open for longer than 30 seconds

during the drying phase, the running programme is

cancelled.

How to save MyFavourite

programme

Press and hold until the related

indicator comes on with xed light.

How to set MyFavourite

programme

Press . The indicator comes on.

The display shows the number and

the duration of the programme.

How to activate XtraDry

Press . The related indicator comes on.

How to activate TimeSaver

Press . The related indicator comes on.

How to activate XtraHygiene

Press . The related indicator comes on.

DAILY USE CARE AND CLEANING

Cleaning lters

An incorrect position of the lters

may cause bad washing results

and damage to the appliance.

Cleaning spray arms

Do not remove spray arms.

If the spray arms are clogged

after cleaning, remove the soil

with a thin pointed object.

Internal cleaning

During cleaning, clean the

rubber gasket of the door.

Run long duration programmes

at least 2 times a month.

Use a specic cleaning product

for dishwasher every month.

External cleaning

Clean the appliance with a moist, soft

cloth. Do not use abrasive products,

abrasive cleaning pads or solvents.

1. Press the button. (A)

2. Insert detergent or tablet into

the compartment. (B)

3. If you want to choose a programme

with prewash phase, put a small

quantity of detergent on the inner

part of the appliance door.

4. Close the lid.

Filling rinse aid container Setting rinse aid level

Fill the rinse aid container before rst use and when the indicator is clear. (C)

1. Open the lid. (E)

2. Fill the container until marking

reaches MAX. (D)

3. Remove spilled rinse aid.

4. Close the lid.

1. Press

The indicators

ash and the display is blank.

2. Press

The indicators

go off.

The indicator

continues to ash.

3. The display shows the current level.

4. Press On/off button to

conrm the setting.

Level 0, no rinse aid.

Level 6, maximum amount of rinse aid.

Using the detergent

Do not ll the detergent

container during rst use.

SAFETY INFORMATION TROUBLESHOOTING

Error codes

The appliance does

not ll with water.

• Make sure that the water tap is open.

• Make sure that the pressure of the water

supply is not too low. For this information,

contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the lter in the

inlet hose is not clogged.

• Make sure that the inlet hose

has no kinks or bends.

The appliance does

not drain the water.

• Make sure that the sink spigot is not clogged.

• Make sure that the lter in the

outlet hose is not clogged.

• Make sure that the interior lter

system is not clogged.

• Make sure that the drain hose

has no kinks or bends.

The anti-ood

device is on.

• Close the water tap and contact

an Authorised Service.

Water connection

Make sure not to cause damage to the water hoses.

• Before you connect the appliance to new pipes or pipes not used for a long

time, let the water ow until it is clean.

• The rst time you use the appliance, make sure that there is no leakage.

• The water inlet hose has a safety valve and a sheath with an inner mains

cable.

• Without electrical power, the water protection system is not active. In this

case there is a risk of ooding.

WARNING! Dangerous voltage.

If the water inlet hose is damaged, immediately close the water

tap and disconnect the mains plug from the mains socket. Contact

the Authorised Service Centre to replace the water inlet hose.

117883970-A-472016

Electrolux GA60LV Quick start guide

Electrolux GA60LV Quick start guide

Electrolux GA60LV Quick start guide

Related papers

Other documents