Integra DVD Player DPC-7.4 User manual

Category
DVD players
Type
User manual

This manual is also suitable for

DVD Changer
DPC-7.4
Instruction Manual
Thank you for purchasing the Integra DPC-7.4 DVD
Changer. Read this manual carefully before using your new
DVD Changer. A good understanding of its features and
operation will allow you to achieve optimum performance
and enjoyment.
Keep this manual for future reference.
Contents
Important Safety Instructions............3
Precautions .......................................4
Introduction .......................................6
Controls & Connectors ...................10
Before Using the DPC-7.4 ...............15
Connecting the DPC-7.4 ................16
Powering Up & Setting Up the
DPC-7.4 .........................................21
Basic Playback ...............................22
Advanced Playback ......................32
Configuring the DPC-7.4 ................39
Troubleshooting ..............................46
Specifications .................................48
En
2
Contents
Important Safety Instructions ............................3
Precautions .........................................................4
Introduction .........................................................6
Supplied Accessories.........................................6
DPC-7.4 Features ..............................................6
Disc Notes..........................................................7
DPC-7.4-related Terminology ............................9
Controls & Connectors......................................10
Front Panel .......................................................10
Display ..............................................................11
Rear Panel ........................................................12
Remote Controller.............................................13
Before Using the DPC-7.4 .................................15
Installing the Remote Controller’s Batteries......15
Using the Remote Controller.............................15
Connecting the DPC-7.4 ....................................16
Before Making Any Connections.......................16
AV Cables & Connectors ..................................16
Connecting Your TV or Projector ......................17
Connecting Your Hi-Fi Amp ..............................18
Connecting for Dolby Digital or DTS .................18
Connecting -compatible AV Components ...19
Plug the supplied power cord
into the AC INLET ..........................................19
Controlling AV Components
that are Out of Range ....................................20
Powering Up & Setting Up the DPC-7.4 ...........21
Powering Up the DPC-7.4.................................21
First Time Setup................................................21
Basic Playback...................................................22
Loading & Removing Discs...............................22
Loading Discs During Playback ........................22
Selecting Discs .................................................23
Starting, Pausing & Stopping Playback ............23
Navigating Disc Menus .....................................25
Selecting Titles & Chapters by Number ............26
Using the Disc Navigator ..................................27
Memory Playback in the Disc Navigator ...........28
Selecting Tracks by Number.............................29
Fast Forward & Reverse ...................................29
Frame-by-Frame Playback ...............................30
Slow-motion Playback.......................................30
Adjusting the Display Brightness ......................30
Using JPEG CDs ..............................................31
Using Chain Mode ............................................31
Advanced Playback...........................................32
Locating Specific Points in Time ...................... 32
Repeat Playback.............................................. 32
A–B Repeat Playback ...................................... 33
Random Playback............................................ 33
Memory Playback............................................. 34
Selecting Camera Angles................................. 35
Selecting Languages & Audio Formats............ 36
Selecting Subtitles............................................ 36
Using Progressive Scanning............................ 36
Using Last Memory .......................................... 37
Displaying Information...................................... 38
Configuring the DPC-7.4 ................................... 39
Using the Onscreen Setup Menus ................... 40
Picture Menu.................................................... 40
Audio Menu...................................................... 42
Language Menu ............................................... 42
Display Menu ................................................... 43
Operation Setting Menu ................................... 44
Initial Setup Menu ............................................ 45
Selecting Other Languages.............................. 45
Language Code List......................................... 45
Troubleshooting ................................................46
Specifications ....................................................48
3
Important Safety Instructions
1.
Read Instructions
All the safety and operating instructions
should be read before the appliance is operated.
2.
Retain Instructions
The safety and operating instructions
should be retained for future reference.
3.
Heed Warnings
All warnings on the appliance and in the
operating instructions should be adhered to.
4.
Follow Instructions
All operating and use instructions
should be followed.
5.
Water and Moisture
– Do not use the appliance near water
–for example, near a bath tub, wash bowl, kitchen sink, or laun-
dry tub; in a wet basement; or near a swimming pool; and the
like.
6.
Cleaning
– Unplug the appliance from the wall outlet before
cleaning. The appliance should be cleaned with a dry cloth or
only as recommended by the manufacturer.
7.
Ventilation
– Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the appliance
and to protect it from overheating, and these openings must not
be blocked or covered. Do not use the appliance on a bed, sofa,
rug, or other such surface. Newspapers, table clothes, curtains,
and other items can inadvertently block ventilation slots. Do
not place the unit near curtains that could obstruct the ventila-
tion. If you install the appliance in a built-in installation, such
as a bookcase or rack, ensure that there is adequate ventilation.
Leave 20 cm (8") of free space at the top and sides and 10 cm
(4") at the rear. The rear edge of the shelf or board above the
appliance should be set 10 cm (4") away from the rear panel or
wall, creating a flue-like gap for warm air to escape.
8.
Heat
– The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other appli-
ances (including amplifier) that produce heat.
9.
Grounding or Polarization
– The appliance may be equipped
with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety pur-
pose of the polarized or grounding-type plug.
A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10.
Power-Cord Protection
– Power-supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
11.
Attachments
– Do not use attachments not recommended by
the appliance manufacturer as they may cause hazards.
Accessories
– Do not place the appliance on an unstable cart,
stand, tripod, bracket, or table. The appliance may fall, causing
serious injury to a child or adult, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the appliance.
Any mounting of the appliance
should follow the manufacturer’s
instructions, and should use a
mounting accessory recommended
by the manufacturer.
12. An appliance and cart combination
should be moved with care to avoid
injury from tip-over.
Quick stops, excessive force, and
uneven surfaces may cause the
appliance and cart combination to
overturn.
13.
Lightning
– For added protection for the appliance during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and discon-
nect the antenna or cable system. This will prevent damage to
the appliance due to lightning and power-line surges.
14.
Servicing
– Do not attempt to service the appliance yourself as
opening or removing covers may expose you to dangerous volt-
age or other hazards. Refer all servicing to qualified service
personnel.
Damage Requiring Service
– Unplug the appliance from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into the
appliance,
C. If the appliance has been exposed to rain or water,
D. If the appliance does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the appliance to its normal operation,
E. If the appliance has been dropped or damaged in any way,
and
F. When the appliance exhibits a distinct change in perfor-
mance – this indicates a need for service.
15.
Object and Liquid Entry
– Never push objects of any kind
into the appliance through openings as they may touch danger-
ous voltage points or short-out parts that could result in a fire or
electric shock.
The appliance should not be exposed to dripping or splashing
and no objects filled with liquids, such as vases should be
placed on the appliance.
Don’t put candles or other burning objects on top of this unit.
16.
Batteries
Always consider the environmental issues and fol-
low local regulations when disposing of batteries.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
AVIS
PORTABLE CART WARNING
S3125A
4
Precautions
DANGER:
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCK FAILED OR DEFEATED. DO NOT
STARE INTO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS
OR ADJUSTMENTS OR PERFORMANCE OF PROCE-
DURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
This unit contains a semiconductor laser system and is classified
as a “CLASS 1 LASER PRODUCT.” So, to use this model prop-
erly, read this Instruction Manual carefully. In case of any trou-
ble, please contact the store where you purchased the unit. To
prevent exposure to the laser beam, do not try to open the enclo-
sure.
In some cases, this label is located on the rear panel. It indicates
that:
1. This unit is a CLASS 1 LASER PRODUCT and employs a
laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove the
cover. Refer servicing to qualified personnel.
For U.S. model
The laser is covered by a housing which prevents exposure dur-
ing operation or maintenance. However, this product is classi-
fied as a Laser Product by CDRH (Center for Devices and
Radiological Health) which is a department of the Food and
Drug Administration.
According to their regulations 21 CFR section 1002.30, all man-
ufactures who sell Laser Products must maintain records of writ-
ten communications between the manufacturer, dealers and
customers concerning radiation safety. If you have any com-
plaints about instructions or explanations affecting the use of
this product, please feel free to write to the address on the back
page of this manual. When you write us, please include the
model number and serial number of your unit.
In compliance with Federal Regulations, the certification, iden-
tification and the period of manufacture are indicated on the rear
panel.
FCC INFORMATION FOR USER
CAUTION:
The user changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
For Canadian model
For models having a power cord with a polarized plug:
CAUTION
:
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
NOTE:
This Class B digital apparatus complies with Canadian
ICES-003.
Modèle canadien
Sur les modèles dont la fiche est polarisée:
ATTENTION
:
POUR ÉVITER LES CHOCS ÉLEC-
TRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA
PRISE ET POUSSER JUSQU’AU FOND.
REMARQUE:
CET APPAREIL NUMÉRIQUE DE LA
CLASSE B EST CONFORME À LA NORME NMB-003 DU
CANADA.
5
Precautions—
Continued
1. Region Numbers
The DVD standard uses region numbers to control how discs can
be played around the world, the world being divided into six
regions. This unit will only play DVD discs that match its region
number, which can be found on its rear panel (e.g., ).
2. About this Manual
This manual explains how to use all of this unit’s functions.
Although the DVD standard offers many special features, not all
discs use them all, so depending on the disc being played, this
unit may not respond to certain functions. See the disc’s sleeve
notes for supported features.
When you attempt to use a DVD feature that is not
available, this logo may appear onscreen, indicating
that the feature is not supported by the current disc or
this unit.
3. Recording Copyright
Unless it’s for personal use only, recording copyrighted material
is illegal without the permission of the copyright holder.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY.
AC outlet voltages vary from country to country. Make sure that
the voltage in your area meets the voltage requirements printed
on this unit’s rear panel (e.g., AC 120 V, 60 Hz).
5. Never Touch this Unit
with Wet Hands
Never handle this unit or its power cord while your hands are
wet or damp. If water or any other liquid gets inside this unit,
have it checked by your Integra/Onkyo dealer.
6. Installing this Unit
Install this unit in a well-ventilated location.
Ensure that there’s adequate ventilation all around this unit,
especially if it’s installed in an audio rack. If the ventilation is
inadequate, the unit may overheat, leading to malfunction.
Do not expose this unit to direct sunlight or heat sources,
because its internal temperature may rise, shortening the life
of the optical pickup.
•Avoid damp and dusty places, and places subject to vibrations
from loudspeakers. Never put the unit on top of, or directly
above a loudspeaker.
Install this unit horizontally. Never use it on its side or on a
sloping surface, because it may cause a malfunction.
If you install this unit near a TV, radio, or VCR, the picture and
sound quality may be affected. If this occurs, move this unit
away from the TV, radio, or VCR.
7. Care
Occasionally, you should dust this unit all over with a soft cloth.
For stubborn stains, use a soft cloth dampened with a weak solu-
tion of mild detergent and water. Dry the unit immediately after-
wards with a clean cloth. Do not use abrasive cloths, thinners,
alcohol, or other chemical solvents, because they may damage
the finish or remove the panel lettering.
8. Handling Notes
If you need to transport this unit, use the original packaging to
pack it how it was when you originally bought it.
Do not use volatile liquids, such as insect sprays, near this
unit. Do not leave rubber or plastic items on this unit for a long
time, because they may leave marks on the case.
This unit’s top and rear panels may get warm after prolonged
use. This is normal.
When you’ve finished using this unit, remove all discs and
turn off the power.
If you do not use this unit for a long time, it may not work
properly the next time you turn it on, so be sure to use it occa-
sionally.
9. To Obtain a Clear Picture
This unit is a high-tech, precision device. If the lens on the opti-
cal pickup, or the disc drive mechanism becomes dirty or worn,
the picture quality may be affected. To maintain the best picture
quality, we recommend regular inspection and maintenance
(cleaning or worn part replacement) every 1,000 hours of use
depending on the operating environment. Contact your Integra/
Onkyo dealer for details.
10. Moisture Condensation
Moisture condensation may damage this unit.
Read the following carefully:
When you take a glass containing a cold drink outside on a sum-
mer’s day, drops of water, called condensation, form on the out-
side of the glass. Similarly, moisture may condense on the lens
of the optical pickup, one of the most important parts inside this
unit.
Moisture condensation can occur in the following situations:
— The unit is moved from a cold place to a warm place.
A heater is turned on, or cold air from an air conditioner is
hitting the unit.
— In the summer, when this unit is moved from an air condi-
tioned room to a hot and humid place.
— The unit is used in a humid place.
Do not use this unit when there’s the possibility of moisture
condensation occurring. Doing so may damage your discs and
certain parts inside this unit.
If condensation does occur, remove all discs and leave this
unit turned on for two to three hours. By this time, the unit will
have warmed up and any condensation will have evaporated.
To reduce the risk of condensation, keep this unit connected to
a wall outlet.
6
Introduction
Make sure you have the following accessories:
Highlights
Dolby
*1
Digital and DTS
*2
Holds up to six discs
Chain mode for successive disc playback
•DVD-Video/Video CD/Audio CD playback
MP3/WMA
*3
playback
JPEG picture display and slideshow
CD-R, CD-RW (Video CD, audio CD, MP3/WMA/JPEG)
•DVD-R, DVD-RW (DVD-Video)
•Vector Linear Shaping Circuitry
Video
Advanced 54 MHz/10-bit video D/A converter
Component video output
•S-Video and composite video outputs
•Title, chapter, track, or time search
•Pause/Still setting for enhanced display of single frames
Frame-by-frame playback
Slow motion playback (four speeds)
•Fast forward and reverse (five speeds)
Last Memory function allows you to resume playback from a
specific point on a DVD-Video or Video CD, even if that disc
has been removed from the DPC-7.4
Repeat playback options include: Chapter, Title, 1 Disc, All
Discs, Track, and Folder (MP3/WMA)
Random playback options include: Title, 1 Disc, All Discs,
and Folder (MP3/WMA)
Supports 4:3 and 16:9 aspect ratio TVs
Supports up to 8 soundtracks/languages
Supports up to 32 subtitle languages
Multiple camera angle support
•Parental Lock function
Screen Saver function
Audio
Audiophile-class performance
Direct digital path
192 kHz/24-bit D/A converter
Coaxial digital output
Optical digital output
Analog output
Others
Heavy-duty power cord
Load discs without stopping playback
Dynamic Range Control setting
Adjustable display brightness
Supplied Accessories
Remote controller (RC-543DV) & 2 batteries (AA/R6)
AV connecting cable (RCA/phono)
S-Video connecting cable
cable
Power cord
Shape may vary depending on the area which it was purchased.
DPC-7.4 Features
*1. Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
*2. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Sys-
tems, Inc.
*3. Windows Media, and the Windows logo are trademarks,
or registered trademarks of Microsoft Corporation in the
United States and/or other countries.
* Xantech is a registered trademark of Xantech Corporation.
* Niles is a registered trademark of Niles Audio Corporation.
7
Introduction—
Continued
Supported Discs
The DPC-7.4 supports the following discs.
The DPC-7.4 does not support disc types not listed.
The DPC-7.4 supports 8 cm and 12 cm discs.
Don’t use discs with an unusual shape, such as those shown
below, because you may damage the DPC-7.4.
Don’t use discs that have residue from adhesive tape, rental
discs with peeling labels, or discs with custom-made labels or
stickers. Doing so may damage the DPC-7.4 and you may not
be able to remove the disc properly.
About playing copy-controlled CDs
Some copy-controlled CDs may not conform to official CD stan-
dards. They are special discs and may not play on the DPC-7.4.
DVD Region Numbers
The North American DPC-7.4 supports only Region 1
DVD-Videos bearing this logo.
The Australian DPC-7.4 supports only Region 4
DVD-Videos bearing this logo.
If you attempt to play a disc intended for another region, the
message “Cannot play discs with this region code” appears
onscreen.
Function Support
The following icons are used throughout this manual to indicate
which functions can be used with the various disc formats and
file types.
Unsupported DVD Features
The DVD standard offers many special features,
including multiple soundtracks, subtitles, camera
angles, and so on. However, not all discs employ all of
these features. When you attempt to use a feature that is not used
by the current disc, for example, you press the remote control-
ler’s [AUDIO] button while playing a disc with only one
soundtrack, this icon will appear onscreen, indicating that the
feature is not supported by the current disc.
Similarly, if a disc uses features that are not supported
by the DPC-7.4, for example, special interactive menu
functions, this icon will appear onscreen, indicating
that the feature is not supported by the DPC-7.4.
Disc Content Organization
DVD-Video Format
DVD-Videos contain titles, which are usually subdivided into
chapters.
Video CD Format
Video CDs contain tracks.
Disc Notes
Disc Logo Format or file type
DVD-Video
*1
*1. The North American model will only play Region 1, NTSC DVD-Vid-
eos. The Australian model will only play Region 4, PAL DVD-Videos,
although it can be set to AUTO, in which case it will also play Region 4
NTSC DVD-Videos (see page 41).
DVD-R
DVD-Video
DVD-RW
DVD-Video
Video CD
Version 1.1 and 2.0
Audio CD
*2
*2. Some audio CDs feature copy protection that doesn’t conform to the
official CD standard. Since these are nonstandard discs, they may not
play properly in the DPC-7.4.
PCM and DTS
CD-R
*3
*3. The DPC-7.4 supports CD-R and CD-RW discs recorded in Video CD
format, audio CD format, or ISO9660 Level 2 format with MP3, WMA,
and JPEG files. It also supports DVD-R and DVD-RW discs recorded
in DVD-Video format. However, some CD-R, CD-RW, DVD-R, and
DVD-RW discs may not work properly for any of the following reasons:
incomplete disc finalization, disc burner characteristics, disc character-
istics, the disc is damaged or dirty. See the manual supplied with your
disc burner for more information. Condensation or dirt on the optical
pickup lens can also affect playback.
Video CD, audio CD,
MP3, WMA, JPEG
CD-RW
Video CD, audio CD,
MP3, WMA, JPEG
JPEG CD
JPEG
Icon Disc format or file type
DVD-Video
Video CD
Audio CD
MP3 file
WMA file
JPEG file
1
4
DVD
VCD
CD
MP3
WMA
JPEG
Title 1
Title 2
Chapter 1 Chapter 2
Chapter 2
DVD-Video
Chapter 1
“”
Video CD
Track 1 Track 2 Track 3 Track 4
8
Introduction—
Continued
Audio CD Format
Audio CDs contain tracks.
MP3/WMA Files
MP3 and WMA files are typically organized into folders. The
DPC-7.4 handles MP3 and WMA files as tracks.
JPEG Files
JPEG picture files are typically organized into folders. The
DPC-7.4 handles JPEG files as tracks.
Video CDs
The DPC-7.4 supports Version 1.1 and Version 2.0 of the Video
CD standard. Version 2.0 supports PBC (Playback Control).
Video CD (Version 1.1)
The contents of Video CDs that conform to Version 1.1 of the
Video CD standard are played as tracks.
Video CD with PBC (Version 2.0)
In addition to the functions supported by Version 1.1, Version
2.0 offers playback control via interactive menus and search
functions. Note that the DPC-7.4 doesn’t support all Video
CD PBC functions.
MP3/WMA/JPEG Compatibility
The DPC-7.4 can play/display MP3, WMA, and JPEG files
recorded on CD-R and CD-RW discs.
Discs must be in ISO9660 Level 2 format (folders can be up
to eight levels deep).
Discs must be finalized.
The DPC-7.4 can only recognize the first session on multises-
sion discs.
•You can determine the order in which the DPC-7.4 plays/dis-
plays your MP3/WMA songs and JPEG pictures by prefixing
file and folder names with a three-digit number. For example
001.Root, 002.Folder, and so on, and 001.Track.mp3,
002.Track.mp3, and so on.
Only the first eight characters of folder and track names
(excluding the filename extension) are displayed.
The folder numbered “001” appears as “ROOT” in the Disc
Navigator.
The DPC-7.4 supports up to 999 folders and up to 672 files per
folder.
If you try to play an incompatible file, the message “This for-
mat cannot be played” appears on the display.
MP3
MP3 files must be MPEG1 Audio Layer 3 format, 44.1 or
48 kHz, fixed bit-rate.
MP3 files must have a “.mp3” or “.MP3” filename extension.
•Variable bit-rates (VBR) from 64 kbps to 384 kbps are sup-
ported. (Playing times may display incorrectly with VBR.)
WMA
WMA files must have the copyright option turned off.
Sampling rates 44.1/48 kHz are supported.
•Variable bit-rates (VBR) from 16 kbps to 192 kbps are sup-
ported. (Playing times may display incorrectly with VBR.)
WMA files must have a “.wma” or “.WMA” or “.ASF” file-
name extension.
JPEG
JPEG files must have a “.jpg” or “.JPG” or “.JPEG” filename
extension.
Baseline JPEG files are supported. Progressive JPEG files are
not.
Only JPEG files with the following brightness/color differ-
ence ratios are supported: 4:4:4, 4:2:2, and 4:1:1.
JPEG files must be less than 5 megabytes in size.
Handling Discs
•Never touch the underside of a disc. Always hold discs by the
edge, as shown.
•Never attach adhesive tape or sticky labels to discs.
Cleaning Discs
•For best results, keep your discs clean. Fingerprints and dust
can affect the sound and picture quality and should be
removed as follows. Using a clean soft cloth, wipe from the
center outwards, as shown. Never wipe in a circular direction.
•To remove stubborn dust or dirt, wipe the disc with a damp
soft cloth, and then dry it with a dry cloth.
•Never use solvent-based cleaning fluids, such as thinner or
benzine, commercially available cleaners, or antistatic sprays
intended for vinyl records, because they may damage the disc.
Audio CD
Track 2 Track 4Track 3Track 1 Track 5
Track 2
Track 3
Track 1
Track 2Track 1
Folder 1 Folder 2
MP3/WMA (CD-R/CD-RW)
Track 2
Track 3
Track 1
Track 2Track 1
Folder 1 Folder 2
JPEG (CD-R/CD-RW)
Underside
9
Introduction—
Continued
Storing Discs
Don’t store discs in places subject to direct sunlight, or near
heat sources.
Don’t store discs in places subject to moisture or dust, such as
in a bathroom or near a humidifier.
•Always store discs in their cases and vertically. Stacking, or
putting objects on unprotected discs may cause warping,
scratches, or other damage.
Copyright
It is forbidden by law to copy, broadcast, show, broadcast on
cable, play in public, or rent copyrighted material without per-
mission.
DVD-Videos are copy-protected, and any recordings made from
these discs will be distorted.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright-protection tech-
nology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only, unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
CD-R (compact disc recordable):
A type of CD that can
be recorded only once. Can be used to make Video-CDs, audio
CDs, or MP3/WMA/JPEG discs.
CD-RW (compact disc rewritable):
A type of CD that can
be recorded many times. Can be used to make Video-CDs, audio
CDs, MP3/WMA/JPEG discs.
Chapter:
Titles on DVD-Videos can be subdivided into
chapters.
Component video:
A video connection format that sepa-
rates the luminance (Y) and color difference signals (P
R
, P
B
),
providing better picture quality than S-Video.
Composite video:
A video connection format that mixes
the luminance and color signals together.
Dolby Digital:
The multi-channel digital surround sound
format used on most DVD-Videos.
Dolby Pro Logic:
The four-channel analog surround sound
format that can be encoded in normal stereo soundtracks and
used with VHS video cassettes, analog TV broadcasts, and other
analog stereo systems.
Downmixing:
The process of mixing multiple audio chan-
nels into fewer channels. For example, a 5.1-channel surround
mix can be downmixed into two channels for reproduction on
stereo systems.
Downsampling:
The process of reducing the sampling rate
of digital audio.
DTS (Digital Theater System):
The 5.1-channel surround
format that uses less compression for faithful reproduction.
DVD-R (DVD recordable):
A type of DVD disc that can be
recorded only once. Can be used to make DVD-Videos or to
store computer data.
DVD-RW (DVD rewritable):
A type of DVD disc that can be
recorded many times. Can be used to make DVD-Videos or to
store computer data.
DVD-Video:
The format for storing movies on DVD, with
interactive menus, multiple language soundtracks, subtitles,
camera angles, and so on.
Field:
In interlaced scanning, a field is a single scan of the
screen. There are two fields per frame.
Frame:
An individual TV picture is called a frame. With the
NTSC color system there are 30 frames per second.
Interlaced scanning:
TV pictures are made by scanning
the screen in horizontal lines from top to bottom. With Interlaced
scanning, two scans (
fields
) are used to make each picture
(
frame
).
Contrast with
Progressive scanning.
JPEG (Joint Photographic Experts Group):
The com-
pressed file format used to store digital photos.
LFE (low-frequency effects):
The surround-sound chan-
nel used for low-frequency effects.
Linear PCM:
The uncompressed digital audio format used
for audio CDs. PCM stands for
Pulse Code modulation.
MP3 (MPEG 1 Audio Layer 3):
Popular compressed file
format for storing digital music.
MPEG1 (Moving Picture Experts Group 1):
The com-
pressed digital video format used for Video CDs.
MPEG2 (Moving Picture Experts Group 2):
The com-
pressed digital video format used for DVD-Videos, offering bet-
ter picture quality than MPEG1.
NTSC:
The color TV system used in the United States,
Japan, Taiwan, and Korea.
PAL:
The color TV system used in most of Europe, the
United Kingdom, Australia, Brazil, and China.
PBC (Playback Control):
Version 2.0 of the Video CD
standard supports interactive menus and search functions.
Progressive scanning:
TV pictures are made by scanning
the screen in horizontal lines from top to bottom. With progres-
sive scanning, each picture (
frame
) is made by scanning the
entire screen in one go, resulting is a clearer and stabler picture.
Contrast with
Interlaced scanning.
S-Video:
A video connection format that separates the lumi-
nance (Y) and color (C) signals, providing better picture quality
than composite video.
Title:
Movies on DVD-Video are called titles.
Video CD:
The format for storing movies on CD.
WMA (Windows Media Audio):
A compressed file format
for storing digital music.
DPC-7.4-related Terminology
10
Controls & Connectors
For detailed information, refer to the pages in parenthesis.
A
Standby/On button (21)
This button is used to set the DPC-7.4 to On or Standby.
B
Standby indicator (21)
This indicator lights up when the DPC-7.4 is in Standby
mode.
C
Last Memory button (37)
This button is used with the Last Memory function.
D
Repeat button (32)
This button is used with the Repeat function.
E
Dimmer button (30)
This button is used to adjust the display brightness.
F
Display button (38)
This button is used to display information about the cur-
rent disc, title, chapter, or track, including the elapsed
time, remaining time, total time, and so on.
G
Display
See “Display” on page 11 for more information.
H
Remote control sensor (15)
This sensor receives control signals from the remote
controller.
I
Open/Close button (22)
This button is used to open and close the disc tray.
J
Chain Mode button (31)
This button is used with the Chain mode function.
K
Stop button (23)
This button is used to stop playback.
L
Play/Enter button (23)
This button is used to start playback and to cancel fast
forward and fast reverse. It’s also used to start Chain
mode playback.
M
Disc tray (22)
The disc tray has six bays for loading up to six discs.
N
Disc tray light
This light illuminates the disc tray. It comes on when the
DPC-7.4 is turned on, and is brighter while the disc tray
is open.
O
Disc Skip button (22, 23)
This button is used to select the disc bays (i.e., rotate the
disc tray) when loading or removing discs, and to select
discs for playback.
P
Down [ ] button (26, 27, 29)
This button is used to select the previous chapter or
track. During playback it selects the beginning of the
current chapter or track.
Q
Up [ ] button (26, 27, 29)
This button is used to select the next chapter or track.
R
Pause button (23)
This button is used to pause playback.
Front Panel
Chain
Mode
Last Memory
Dimmer
Repeat
Display
Standby/On
Standby
Play
Stop
Pause
Disc Skip
Open
/Close
Enter
DPC
-
7.4
ABC456 7 8 LKJ9
N O PQRM
11
Controls & Connectors
—Continued
For detailed information, refer to the pages in parenthesis.
1
CHAIN MODE, ALL, DVD & CD indicators (31)
The Chain Mode indicator appears when the Chain mode
function is on. The ALL, DVD, and CD indicators show
the type or Chain mode selected.
2
DISC indicator
The number of the currently selected disc appears here.
3
TITLE indicator
While stopped, the total number of titles on the current
DVD-Video is displayed here. During playback, the
number of the current title is displayed.
4
CHP indicator
This indicator appears while the number of the current
chapter is being displayed.
5
TRACK indicator
This indicator appears while track numbers are being
displayed. While stopped, the total number of tracks on
the current Video CD, audio CD, or MP3/WMA disc are
displayed. During playback, the number of the current
track is displayed.
6
PRGV indicator (36)
This indicator appears when the Progressive Scanning
function is on.
7
LAST indicator (37)
This indicator appears when the Last Memory function
has been set.
8
TOTAL indicator
This indicator appears while the total time is being dis-
played.
9
REMAIN indicator
This indicator appears while the remaining time is being
displayed.
0
Camera angle
indicator (35)
This indicator appears if the DVD-Video being played
features multiple camera angles.
A
Play indicator (23)
This indicator is shown during playback.
B
Pause indicator (23)
This indicator appears when playback is paused.
C
Disc indicators 1–6
These indicators show how many discs are loaded. The
number of the current disc has a circle around it.
When the disc tray is closed, all of the disc indicators
appear until the DPC-7.4 has checked each bay for the
presence of a disc. If a bay is found to have no disc, the
corresponding indicator disappears.
D
Chapter & track number
Chapter and track numbers appears here.
E
Time display
Time information, such as total time, remaining time,
and so on, is displayed here in hours, minutes, and sec-
onds. Other messages are also displayed.
F
VCDVD indicator
This indicator shows the type of disc currently selected:
DVD:
DVD-Video, DVD-R, or DVD-RW
VCD:
Video CD
CD:
Audio CD, MP3/WMA/JPEG CD-R, or CD-RW
Display
CD
DVD
ALL
CHAIN MODE DISC TITLE CHP
TRACK PRGV LAST
TOTAL REMAIN
1 2 3
4 5 6
VCDVD
13
DEF
45 67 8 90AB C2
12
Controls & Connectors
—Continued
For detailed information, refer to the pages in parenthesis.
A
COMPONENT 1 VIDEO OUTPUT (17)
These RCA/phono connectors can be used to connect a
TV or projector with RCA/phono component video
inputs.
The DPC-7.4 has two component video outputs, the
COMPONENT 1 and COMPONENT 2, however, they
output the same video signal.
B
COMPONENT 2 VIDEO OUTPUT (17)
These BNC connectors can be used to connect a TV or
projector with BNC component video inputs.
The DPC-7.4 has two component video outputs, the
COMPONENT 1 and COMPONENT 2, however, they
output the same video signal.
C
S VIDEO OUTPUT (17)
These connectors can be used to connect TVs or projec-
tors with S-Video inputs.
The DPC-7.4 has two S-Video output connectors. They
output the same video signal.
D
VIDEO OUTPUT (17)
These RCA/phono connectors can be used to connect
TVs or projectors with composite video inputs.
The DPC-7.4 has two composite video output connec-
tors. They output the same video signal respectively.
E
ANALOG AUDIO OUTPUT (17, 18)
These RCA/phono connectors can be connected to the
analog audio inputs on your TV, hi-fi amp, AV receiver,
or surround sound decoder (Dolby Pro Logic). There are
two sets of outputs. You could connect one set to your AV
receiver, the other to your TV for those occasions when
you want to watch a DVD-Video but don’t want to use
your AV receiver.
The DPC-7.4 has two pairs of stereo analog audio output
connectors. They output the same audio signal respec-
tively.
F
IR IN/OUT (20)
The IR IN connector can be used to connect a commer-
cially available IR receiver, which can be used to pickup
signals from the remote controller when the DPC-7.4 is
located in another room, installed in a rack, or is out of
range of the remote controller
The IR OUT connector can be used to connect a com-
mercially available IR emitter, which can be used to pass
remote controller signals received by the IR IN along to
other AV components.
G
REMOTE CONTROL (19)
These (Remote Interactive) connectors can be con-
nected to the connectors on your other Integra/
Onkyo AV components for interactive control.
To use you must also make an analog RCA/phono
connection between your DPC-7.4 and Integra/Onkyo
AV receiver, even if they are connected digitally.
H
OPTICAL AUDIO OUTPUT (18)
This optical digital audio output can be connected to an
optical digital audio input on a hi-fi amp, AV receiver, or
surround sound decoder (Dolby Digital, DTS).
I
COAXIAL AUDIO OUTPUT (18)
This coaxial digital audio output can be connected to an
coaxial digital audio input on a hi-fi amp, AV receiver, or
surround sound decoder (Dolby Digital, DTS).
J
RS 232
This RS-232 port can be connected to an external con-
troller.
K
AC INLET (21)
The supplied power cord is connected here. The other
end of the power cord should be connected to a suitable
wall outlet.
Rear Panel
MODEL NO.
DPC
-
7.4
DVD
CHANGER
AC
INLET
S
VIDEO
VIDEO
REMOTE
CONTROL
L
R
DIGITAL
OPTICAL COAXIAL
ANALOG
COMPONENT
2
COMPONENT
1
OUT
IN
P
B
YP
R
P
B
YP
R
IR
VIDEO
OUTPUT
RS
232
AUDIO
OUTPUT
AUDIO
OUTPUT
2 314
5 6 7 KJ98
13
Controls & Connectors
—Continued
For detailed information, refer to the pages in parenthesis.
A
Standby button (21)
This button is used to set the DPC-7.4 to Standby.
B
On button (21)
This button is used to turn on the DPC-7.4.
C
Search button (26, 29, 32)
This button is used to search for titles, chapters, tracks,
and specific points in time.
D
Last M button (37)
This button is used with the Last Memory function.
E
Number buttons (26, 29, 32)
These buttons are used to enter title, chapter, and track
numbers and to enter times for locating specific points in
time.
To enter a single-digit number, simply press the corre-
sponding button. To enter a double-digit number, enter
the numbers in order from left-to-right (e.g., to enter 14,
press [1] then [4].
The [+10] button is used to enter multiples of ten (i.e.,
10, 20, 30, and so on). For example, to enter the number
25, press the [+10] button twice followed by the [5] but-
ton.
F
Top Menu button (25)
This button is used to select the top menu.
G
Return button (25, 27, 40)
This button is used to move the preceding setup menu
and to restart Video CD menu playback.
H
Audio button (36)
This button is used to select foreign language
soundtracks and audio formats (e.g., Dolby Digital or
DTS).
I
Angle button (35)
This button is used to select different camera angles.
J
FR [ ] button (29)
This button is used to start fast reverse.
K
FF [ ] button (29)
This button is used to start fast forward.
L
Disc 1–6 buttons (23)
These buttons are used to select discs. Playback starts
automatically when a disc is selected with these buttons.
M
Disc Skip button (22, 23)
This button is used to select the disc bays (i.e., rotate the
disc tray) when loading or removing discs, and to select
discs for playback.
N
Memory button (34)
This button is used with the Memory Playback function.
O
Open/Close [ ] button (22)
This button is used to open and close the disc tray.
P
Chain Mode button (31)
This button is used with the Chain mode function.
Remote Controller
+
10
Disc 1 Disc
2
Disc
3
Disc
4
Disc
5
Disc
6
Disc Skip
Progressive
Dimmer
Step/Slow
Clear
123
645
Setup
Top Menu
Return
Audio
Stop
DownFFFR Up
Play Pause
Angle Subtitle
RC
-
543DV
Open/
Close
On
Standby
Enter
7
8
9
0
Search Last M Memory
Chain Mode
Repeat
A
-
B
Random
Display
Menu
1
N
O
2
3
5
6
7
M
L
8
9
J
K
4
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
f
g
h
c
d
e
14
Controls & Connectors
—Continued
Q
Repeat button (32)
This button is used to set the Repeat Playback functions.
R
A–B button (33)
This button is used to set the A–B Repeat Playback func-
tion.
S
Random button (33)
This button is used with the Random Playback function.
T
Display button (38)
This button is used to display information about the cur-
rent disc, title, chapter, or track, including the elapsed
time, remaining time, total time, and so on.
U
Clear button
This button is used to cancel various functions.
V
Menu button (25)
This button is used to select the menu.
W
Enter button
This button is used to start playback of the selected title
chapter, or track and to confirm settings.
X
[], [], [], [] buttons
These buttons are used to navigate DVD-Video menus
and the onscreen setup menus.
Y
Setup button (40)
This button is used to open and close the onscreen setup
menus.
Z
Subtitle button (36)
This button is used to select subtitles.
a
Play [ ] button (23)
This button is used to start playback.
b
Pause [ ] button (23)
This button is used to pause playback.
c
Stop [ ] button (23)
This button is used to stop playback.
d
Up [ ] button (26, 29)
This button is used to select the next chapter or track.
e
Down [ ] button (26, 29)
This button is used to select the previous chapter or
track. During playback it selects the beginning of the
current chapter or track.
f
Step/Slow [+] & [–] buttons (30)
These buttons are used with the Frame-by-Frame Play-
back and Slow Motion Playback functions.
g
Dimmer button (30)
This button is used to adjust the display brightness.
h
Progressive button (36)
This button is used to turn on and off the Progressive
Scanning function. Progressive scanning can’t be turned
on or off during playback.
+
10
Disc 1 Disc
2
Disc
3
Disc
4
Disc
5
Disc
6
Disc Skip
Progressive
Dimmer
Step/Slow
Clear
123
645
Setup
Top Menu
Return
Audio
Stop
DownFFFR Up
Play Pause
Angle Subtitle
RC
-
543DV
Open/
Close
On
Standby
Enter
7
8
9
0
Search Last M Memory
Chain Mode
Repeat
A
-
B
Random
Display
Menu
1
N
O
2
3
5
6
7
M
L
8
9
J
K
4
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
f
g
h
c
d
e
15
Before Using the DPC-7.4
Notes:
The supplied batteries should last for about six months,
although this will vary with usage.
If the remote controller doesn’t work reliably, try replacing
both batteries.
Don’t mix new and old batteries, or different types of bat-
teries.
If you intend not to use the remote controller for a long
time, remove the batteries to prevent possible leakage and
corrosion.
Flat batteries should be removed as soon as possible to pre-
vent possible leakage and corrosion.
To use the remote controller, point it at the DPC-7.4’s remote
control sensor, as shown below.
Notes:
The remote controller may not work reliably if the DPC-
7.4 is subjected to bright light, such as direct sunlight or
inverter-type fluorescent lights. Keep this in mind when
installing the DPC-7.4.
If another remote controller of the same type is used in the
same room, or the DPC-7.4 is installed close to equipment
that uses infrared rays, the remote controller may not work
reliably.
Don’t put anything, such as a book, on the remote control-
ler, because the buttons may be pressed inadvertently,
thereby draining the batteries.
The remote controller may not work reliably if the DPC-
7.4 is installed in a rack behind colored glass doors. Keep
this in mind when installing the DPC-7.4.
The remote controller will not work if there’s an obstacle
between it and the DPC-7.4’s remote control sensor.
Installing the Remote Controller’s
Batteries
1
Open the battery compartment, as shown.
2
Insert the two supplied batteries (AA/R6) in
accordance with the polarity diagram inside
the battery compartment.
3
Close the battery compartment.
Using the Remote Controller
C
h
ai
n
Mo
de
La
st
M
e
m
o
ry
D
im
m
e
rR
e
p
e
a
t
Dis
p
la
y
S
tandby
/On
S
t
an
d
b
y
P
l
ay
S
top
Pa
u
se
Disc S
kip
Open
/C
lose
En
t
e
r
DP
C
-
7.4
30˚
30˚
Remote control sensor
Approx. 16 ft. (5 m)
DPC-7.4
16
Connecting the DPC-7.4
This chapter explains how to connect the DPC-7.4 to your
other AV components.
Read the manuals supplied with your AV components.
Don’t connect the power cord until you’ve completed all
audio and video connections.
Optical Digital Inputs
The DPC-7.4’s optical digital connector
has a dust cap for keeping out dust and dirt
when it’s not in use. Remove the cap before
inserting an optical digital plug. Push the
plug in all the way to make a good connec-
tion. Keep the dust cap in a safe place for
future use.
RCA/phono AV Connection Color Coding
RCA/phono AV connections are usually color coded: red,
white, and yellow. Use red plugs to connect right-channel
audio inputs and outputs (typically labeled “R”). Use white
plugs to connect left-channel audio inputs and outputs (typi-
cally labeled “L”). And use yellow plugs to connect compos-
ite video inputs and outputs.
Push each plug in all the way to
make a good connection (loose con-
nections can cause noise or malfunc-
tions).
•To prevent interference, keep audio
and video cables away from power
cords and speaker cables.
Before Making Any Connections
Analog audio
Right (red)
Left (white)
(Yellow)
Right (red)
Left (white)
(Yellow)
Composite video
Wrong!
Right!
AV Cables & Connectors
Video
Component
video
Component video separates the luminance (Y) and color
difference signals (P
R
, P
B
), providing the best picture
quality. (Some TV manufacturers label their component
video inputs slightly differently.)
The DPC-7.4 has RCA/phono and BNC component
video outputs.
S-Video
S-Video provides better picture quality than composite
video.
Composite
video
Composite video can be found on virtually all TVs,
VCRs, and other video equipment. Use only dedicated
composite video cables.
Audio
Optical digital
Optical digital audio connections with the optical digital
audio output and a suitable AV receiver, you can enjoy
DVD-Videos with surround sound.
Coaxial digital
Coaxial digital audio connections with the coaxial digi-
tal audio output and a suitable AV receiver, you can
enjoy DVD-Videos with surround sound.
Analog
RCA/phono analog audio connectors can be found on
virtually all AV components.
C
R
C
B
Y
C
R
C
B
P
R
P
B
P/ /
//
R
P
B
Y
COMPONENT
1
PBYPR
C
R
C
B
Y
C
R
C
B
P
R
P
B
P/ /
//
R
P
B
Y
COMPONENT
2
PBYPR
S VIDEO
VIDEO
OPTICAL
COAXIAL
LR
AUDIO
17
Connecting the DPC-7.4
—Continued
This section explains how to connect the DPC-7.4 to your TV
or projector.
In this hookup example, the TV handles the audio and video.
If your TV has a Dolby Pro Logic decoder built-in, you’ll be
able to enjoy DVDs and videos that bear the Dolby Surround
logo.
To enjoy Dolby Digital or DTS (5.1-channel surround),
you’ll need a compatible decoder (see page 18).
The DPC-7.4 has three types of video output: component
video, S-Video, and composite video. Component video
offers the best picture quality, so if your TV supports it, use
a commercially available component video cable to connect
the DPC-7.4’s COMPONENT video output to the compo-
nent video inputs on your TV. If your TV supports progres-
sive scanning, you must use component video in order to take
advantage of that feature.
S-Video offers better picture quality than composite video,
so if your TV supports it, use the supplied S-Video cable to
connect the DPC-7.4’s S VIDEO output to an S-Video input
on your TV. Failing that, use the supplied composite video
cable to connect the DPC-7.4’s VIDEO output to a composite
video input on your TV.
Notes
Before making any connections, turn off the DPC-7.4 and
your TV and disconnect their power cords from the wall
outlets.
Also refer to the connection information supplied with
your TV.
Connect the DPC-7.4’s video outputs directly to your TV.
Don’t connect a VCR or other video equipment in between
your DPC-7.4 and TV. Doing so may result in picture dis-
tortion, because of the copy protection system used on
DVD-Videos.
When you use the analog audio outputs, don’t play DTS
CDs and don’t select DTS soundtracks on DVD-Videos.
Doing so will produce unpleasant digital noise, which may
damage your equipment.
If your TV or projector has BNC component video inputs,
use a BNC component video cable to connect them to the
DPC-7.4’s BNC component video outputs.
Connecting Your TV or Projector
1
Turn off the DPC-7.4 and your TV, and dis-
connect their power cords from the wall out-
lets.
2
Connect the DPC-7.4 to your TV as shown.
3
When you’ve completed all connections, see
“Powering Up & Setting Up the DPC-7.4” on
page 21.
MODEL NO.
DPC
-
7.4
DVD
CHANGER
AC
INLET
S
VIDEO
VIDEO
REMOTE
CONTROL
L
R
DIGITAL
OPTICAL COAXIAL
ANALOG
COMPONENT
2
COMPONENT
1
OUT
IN
P
B
YP
R
P
B
YP
R
IR
VIDEO
OUTPUT
RS
232
AUDIO
OUTPUT
AUDIO
OUTPUT
L
R
ANALOG
INPUT
S VIDEO IN
Y
IN
PB
PR
VIDEO IN
AV RCA/phono
cable (supplied)*
1
(yellow)
(yellow)
(white)
(white)
(red)
TV or projector
(red)
S-Video cable
(supplied)*
2
Component video
cable*
3
Only one connection required!
Choose component video,
S-Video, or composite video.
Signal flow
*1
T
h
e DP
C
-7.
4
h
as two compos
i
te v
id
eo out-
put connectors and two pairs of stereo ana-
log audio output connectors. They output the
same video and audio signals respectively.
*2 The DPC-7.4 has two S-Video output con-
nectors. They output the same video signal.
*3 The DPC-7.4 has two component video out-
puts. The COMPONENT 1 output uses
RCA/phono connectors. The COMPO-
NENT 2 output uses BNC connectors. They
output the same video signal.
18
Connecting the DPC-7.4
—Continued
This section explains how to connect the DPC-7.4 to a stereo
hi-fi amp or receiver for better sound quality than that of most
TVs. This is ideal for playing your audio CDs and MP3/
WMA discs in the DPC-7.4. DVD-Videos and Video CDs
will sound better too. You can also enjoy Dolby Pro Logic, so
long as your receiver supports it.
Analog Connection
Use an RCA/phono audio cable to connect the DPC-7.4’s
ANALOG AUDIO OUTPUTs to a pair of analog audio
inputs on your hi-fi amp or receiver, as shown.
Notes:
When you use the analog audio outputs, don’t play DTS
CDs or don’t select DTS soundtracks on DVD-Videos.
Doing so will produce unpleasant digital noise, which may
damage your equipment.
The DPC-7.4 has two composite video output connectors
and two pairs of stereo analog audio output connectors.
They output the same video and audio signals respectively.
Digital Connection
Use an optical (or coaxial) digital audio cable to connect the
DPC-7.4’s OPTICAL (or COAXIAL) DIGITAL AUDIO
OUTPUT to an optical (or coaxial) input on your hi-fi amp or
receiver, as shown.
Notes:
Be sure to set the Digital Out–>Dolby Digital setting to
“Dolby Digital>PCM” (see page 42). Otherwise an
unpleasant digital noise may be heard, which may damage
your equipment.
•Never connect the DPC-7.4 to the AC-3RF input on a
Dolby Digital receiver. The AC-3RF format is not sup-
ported by the DPC-7.4.
To enjoy Dolby Digital or DTS surround sound, you need to
connect one of the DPC-7.4 digital audio outputs to the dig-
ital input on a Dolby Digital or DTS decoder or an AV
receiver with built-in decoders.
This hookup example will also allow you to enjoy Dolby Pro
Logic, so long as your decoder or AV receiver supports it.
Notes:
In addition to a digital connection, we recommend also
connecting using the stereo analog connection.
To record the audio from a CD-R disc etc. to a cassette or
CDR recorder that’s connected to the AV receiver, and
when your AV receiver has Zone2, you must connect the
DPC-7.4’s analog audio outputs to the AV receiver.
Make sure that the Digital Out > Dolby Digital setting to
“Dolby Digital” (see page 42). Otherwise you won’t get
surround sound.
Also refer to the connection information supplied with
your AV receiver or decoder.
When playing Dolby Digital or DTS source material, be
sure to select Dolby Digital or DTS decoding, respectively,
on your AV receiver or decoder. See the relevant manuals.
•You can experience Dolby Digital only with DVDs that
bear the Dolby Digital logo. Likewise, you can experience
DTS only with DVDs or CDs that bear the DTS logo.
When a DVD disc is loaded into the DVD player, the disc
would default to Dolby digital format. For DTS playback
you would need to select DTS in the table of contents of
the movie. Usually in “Language” or in “Audio Setup”.
Connecting Your Hi-Fi Amp
S
VIDEO
VIDEO
REMOTE
CONTROL
L
R
DIGITAL
OPTICAL COAXIAL
ANALOG
COMPONENT
2
COMPONENT
1
OUT
IN
P
B
YP
R
P
B
YP
R
IR
VIDEO
OUTPUT
AUDIO
OUTPUT
AUDIO
OUTPUT
L
R
ANALOG
INPUT
RCA/phono cable
(white)
(white)
(red)
(red)
Signal flow
L
R
ANALOG
AUDIO
OUTPUT
MODEL NO.
DPC
-
7. 4
DVD
CHANGER
S
VIDEO
VIDEO
REMOTE
CONTROL
L
R
DIGITAL
OPTICAL COAXIAL
ANALOG
COMPONENT
2
COMPONENT
1
OUT
IN
P
B
YP
R
P
B
YP
R
IR
VIDEO
OUTPUT
RS
232
AUDIO
OUTPUT
AUDIO
OUTPUT
OPTICAL
1
OPTICAL
COAXIAL
COAXIAL
Connect one or the other
Signal flow
Connecting for Dolby Digital or DTS
MODEL NO.
DPC
-
7. 4
DVD
CHANGER
S
VIDEO
VIDEO
REMOTE
CONTROL
L
R
DIGITAL
OPTICAL COAXIAL
ANALOG
COMPONENT
2
COMPONENT
1
OUT
IN
P
B
YP
R
P
B
YP
R
IR
VIDEO
OUTPUT
RS
232
AUDIO
OUTPUT
AUDIO
OUTPUT
AV component with
Dolby Digital/DTS decoder
OPTICAL
1
OPTICAL
COAXIAL
COAXIAL
Connect one or the other
Signal flow
19
Connecting the DPC-7.4
—Continued
With (Remote Interactive) you can control your DPC-7.4
by using the remote controller supplied with your Onkyo or
Integra -compatible AV receiver.
Notes:
Push the plugs in all the way to make a good connection.
Use only cables for connections.
To use you must also make an analog RCA/phono
connection between your DPC-7.4 and Integra/Onkyo
AV receiver, even if they are connected digitally.
The DPC-7.4 has two connectors. You can connect
either one to your Integra/Onkyo AV receiver. The other
connector is for connecting additional -compatible
components.
Connect the DPC-7.4’s connector to only Integra/
Onkyo AV components. Connecting to other manufac-
turer’s AV components may cause them to malfunction.
Do not use a power cord other than the one supplied with
the DPC-7.4. The power cord supplied is designed for use
with the DPC-7.4 and should not be used with any other
device.
•Never have the power cord disconnected from the DPC-7.4
while the other end is plugged into the wall outlet. Doing
so may cause an electric shock. Always connect by plug-
ging into the wall outlet last and disconnect by unplugging
from the wall outlet first.
Connecting -compatible AV
Components
MODEL NO.
DPC
-
7. 4
DVD
CHANGER
S
VIDEO
VIDEO
REMOTE
CONTROL
L
R
DIGITAL
OPTICAL COAXIAL
ANALOG
COMPONENT
2
COMPONENT
1
OUT
IN
P
B
YP
R
P
B
YP
R
IR
VIDEO
OUTPUT
RS
232
AUDIO
OUTPUT
AUDIO
OUTPUT
Integra/Onkyo AV receiver
REMOTE
CONTROL
L
R
ANALOG
INPUT
DIGITAL IN
OPTICAL
cable
To use you
must make an
analog RCA/phono
connection between
the DPC-7.4 and the
other component
even if they are
connected digitally.
OPTICAL COAXIAL
DIGITAL
OPTICAL COAXIAL
AUDIO
OUTPUT
(Supplied)
L
R
ANALOG
AUDIO
OUTPUT
REMOTE
CONTROL
Plug the supplied power cord into the AC
INLET
.
DPC
-
7. 4
A
NGER
AC
INLET
20
Connecting the DPC-7.4
—Continued
You can use the following multi-room kits to control the
DPC-7.4 when it’s out of range of the remote controller:
Integra Multi-Room System (IR Remote Controller Exten-
sion System)
Multiroom AV distribution and control systems such as
those made by Niles
®
and Xantech
®
.
Controlling the DPC-7.4 When It’s Out of Range
If the DPC-7.4 is located in another room, installed in a cab-
inet, or out of range of its remote controller, you can use a
commercially available IR receiver to pickup the remote con-
troller signals and feed them to the DPC-7.4, as shown below.
Connect the IR receiver to the DPC-7.4 as shown below.
Controlling Other Out-of-range AV Components
If another AV component is out of range of its remote con-
troller, you can use a commercially available IR emitter to
retransmit the remote controller signals received at the DPC-
7.4’s IR IN, as shown below.
Connect the IR emitter to the DPC-7.4’s IR OUT, and place
the IR emitter in front of the other AV component’s remote
control sensor (usually located on its front panel), as shown
below. See the instructions supplied with the IR emitter.
Only remote controller signals received by the DPC-7.4’s IR
IN are fed through to the IR OUT. Signals picked up by the
DPC-7.4’s remote control sensor are not output.
Controlling AV Components that are Out of Range
MODEL NO.
DPC
-
7. 4
DVD
CHANGER
S
VIDEO
VIDEO
REMOTE
CONTROL
L
R
DIGITAL
OPTICAL COAXIAL
ANALOG
COMPONENT
2
COMPONENT
1
OUT
IN
P
B
YP
R
P
B
YP
R
IR
VIDEO
OUTPUT
RS
232
AUDIO
OUTPUT
AUDIO
OUTPUT
OUT
IN
IR
IR IN
DPC-7.4
Inside
cabinet
Remote controller
Connecting
block
IR receiver
Signal flow
OUT
IN
IR
DPC-7.4
from connecting block
Miniplug cable
Signal flow
IR IN
IR OUT
Connecting
block
IR receiver
DPC-7.4
IR emitter
Remote controller
Other
component
Signal flow
Signal flow
OUT
IN
IR
DPC-7.4
Remote control
Other component
sensor
from connecting block
Miniplug cable
Miniplug
IR emitter
IR Emitter
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Integra DVD Player DPC-7.4 User manual

Category
DVD players
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI