Panasonic DMP-BDT320 User manual

Category
Blu-Ray players
Type
User manual

This manual is also suitable for

Operating Instructions
Blu-ray Disc
TM
Player
Model No. DMP-BDT320
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
GN
GC
GA
VQT3V87
until
2012/2/27
DMP-BDT320GNGCGA-VQT3V87.book 1 ページ 2012年2月9日 木曜日 午後3時12分
2
VQT3V87
Unit
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or
splashing.
Do not place objects filled with liquids, such as vases, on
this unit.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
Do not let metal objects fall inside this unit.
Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or product damage,
Ensure that the power supply voltage corresponds to the
voltage printed on this unit.
Insert the mains plug fully into the socket outlet.
Do not pull, bend, or place heavy items on the lead.
Do not handle the plug with wet hands.
Hold onto the mains plug body when disconnecting the plug.
Do not use a damaged mains plug or socket outlet.
Install this unit so that the AC mains lead can be unplugged
from the socket outlet immediately if any problem occurs.
SD card
Keep the Memory Card out of reach of children to prevent
swallowing.
Unit
This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Do not place sources of naked flames, such as lighted
candles, on this unit.
This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile
telephone.
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage,
Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit is
well ventilated.
Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive vibration.
Batteries
Mishandling of batteries can cause electrolyte leakage and
may cause a fire.
Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
When disposing the batteries, please contact your local
authorities or dealer and ask for the correct method of
disposal.
Do not mix old and new batteries or different types at the
same time.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and windows
closed.
Do not take apart or short circuit.
Do not recharge alkaline or manganese batteries.
Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote
control for a long period of time. Store in a cool, dark place.
Safety precautions
WARNING CAUTION
[For[Australia[and[New[Zealand]
This unit is intended for use in moderate climates.
[Except[Australia[and[New[Zealand]
This unit is intended for use in tropical climates.
DMP-BDT320GNGCGA-VQT3V87.book 2 ページ 2012年2月9日 木曜日 午後3時12分
Getting startedConnections and settingsPlaybackSettingsReference
3
VQT3V87
Table of contents
Getting started
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . 2
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Unit and media care. . . . . . . . . . . . . . . . . . . . . . 4
Playable media . . . . . . . . . . . . . . . . . . . . . . . . . 5
Control reference guide . . . . . . . . . . . . . . . . . . . 8
Using the touchpad . . . . . . . . . . . . . . . . . . . . . . 9
Connections and settings
STEP 1 : Connecting to a TV. . . . . . . . . . . . . . 11
STEP 2 : Connecting to
an amplifier/receiver . . . . . . . . . . . . . 12
STEP 3 : Connecting to the network . . . . . . . . 13
STEP 4 : Connecting the AC mains lead. . . . . 13
STEP 5 : Settings . . . . . . . . . . . . . . . . . . . . . . 14
STEP 6 : Reprogramming
the remote control. . . . . . . . . . . . . . . 16
Smart eco-sensor . . . . . . . . . . . . . . . . . . . . . . 16
Playback
Inserting or removing media . . . . . . . . . . . . . . 17
HOME menu . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Multi User Mode. . . . . . . . . . . . . . . . . . . . . . . . 18
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
VIERA Connect (Enjoying Internet
Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Home Network feature. . . . . . . . . . . . . . . . . . . 24
VIERA Link “HDAVI Control™” . . . . . . . . . . . . 26
Settings
Option menu . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Reference
Troubleshooting guide . . . . . . . . . . . . . . . . . . . 36
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Supplemental information . . . . . . . . . . . . . . . . 42
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . 43
Precautions of wireless LAN connection . . . . . 44
(For Saudi Arabia)
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
Fuse cover
Figure A Figure B
Figure A Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
Restriction on use of unauthorized
copied content (> 41)
Firmware updates (> 15)
DMP-BDT320GNGCGA-VQT3V87.book 3 ページ 2012年2月9日 木曜日 午後3時12分
4
VQT3V87
Getting started
Accessories
Check the supplied accessories before using this
unit.
Do not use AC mains lead with other equipment.
Using the remote control
Insert so the poles (i and j) match those in the
remote control.
Unit and media care
Clean this unit with a soft, dry cloth
Never use alcohol, paint thinner or benzine to
clean this unit.
Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
This unit’s lens
Clean discs
Wipe with a damp cloth and then wipe dry.
Disc and card handling precautions
Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
Do not attach labels or stickers to discs.
Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
Clean any dust, water, or foreign matter from
the terminals on the rear side of the card.
Do not use the following discs:
Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
Discs that are badly warped or cracked.
Irregularly shaped discs, such as heart
shapes.
To dispose or transfer this unit
The unit may keep the user settings information in
the unit. If you discard this unit either by disposal
or transfer, then follow the procedure to return all
the settings to the factory presets to delete the
user settings. (> 36, “To return all settings to the
factory preset.”)
The operation history may be recorded in the
memory of this unit.
[For[Aust ra li a[ and[ New[ Zealand]
1 Remote control
(N2QAYB000713)
2 Batteries for remote control
1 AC mains lead
[For]the]Middle]East]
1 Remote control
(N2QAYB000713)
2 Batteries for remote control
2 AC mains lead*
1 HDMI Cable
[For[South[East[Asia]
1 Remote control
(N2QAYB000713)
2 Batteries for remote control
2 AC mains lead*
1 HDMI Cable
* See page 13 for more information.
Product numbers provided in these operating instructions
correct as of January 2012. These may be subject to
change.
Point it at the remote control signal sensor on this
unit. (> 8)
LR6, AA
(Alkaline batteries)
The disc drive of this unit has sufficient dust
resistance, so there is no need to clean the lens.
DO
DO NOT
DMP-BDT320GNGCGA-VQT3V87.book 4 ページ 2012年2月9日 木曜日 午後3時12分
Getting started
5
VQT3V87
Playable media
Device Disc markings Device types Contents format
BD-Video Video
BD-RE Video, JPEG, MPO
BD-R
Video, DivX
®
, MKV
DVD-Video Video
DVD-R
Video, AVCHD, DivX
®
,
MKV, JPEG, MPO,
FLAC, MP3, WAV
DVD-R DL
DVD-RW
Video, AVCHD
+R/+RW/+R DL
Music CD Music [CD-DA]
CD-R
CD-RW
DivX
®
, MKV, JPEG,
MPO, FLAC, MP3,
Music [CD-DA], WAV
SD Memory Card (from 8 MB to 2 GB)
SDHC Memory Card (from 4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
(Compatible with both mini and micro types)
AVCHD, AVCHD 3D,
MP4, MPEG2, JPEG,
MPO
USB devices
(up to 2 TB)
DivX
®
, MKV, MP4,
MPEG, JPEG, MPO,
FLAC, MP3, WAV
See pages 6–7 and 43 for more information on the types of content that can be played.
BD
DVD
CD
USB
DMP-BDT320GNGCGA-VQT3V87.book 5 ページ 2012年2月9日 木曜日 午後3時12分
6
VQT3V87
Discs that cannot be played by this
unit
Region management information
DVD-RAM
Super Audio CD
Photo CD
DVD-Audio
Video CD and Super Video CD
WMA discs
DivX Plus HD discs
HD DVD
BD-Video:
[For[South[East[Asia]
This unit can
play BD-Video
discs supporting
the region code
A”.
[For[Australia[and[New[Zealand]
[For]the]Middle]Eas t]
This unit can
play BD-Video
discs supporting
the region code
B”.
Example:
Example:
DVD-Video:
[For]the ]Middle]Eas t]
This unit can
play DVD-Video
discs supporting
the region
number “2” or
ALL”.
[For[South[ East[Asi a]
This unit can
play DVD-Video
discs supporting
the region
number “3” or
ALL”.
[For[Aust ra li a[ and[ New[Zealand]
This unit can
play DVD-Video
discs supporting
the region
number “4” or
ALL”.
2 ALL
3
5
2
Example:
3 ALL
3
4
2
Example:
4 ALL
3
4
2
Example:
DMP-BDT320GNGCGA-VQT3V87.book 6 ページ 2012年2月9日 木曜日 午後3時12分
Getting started
7
VQT3V87
Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW
recorded by a recorder, etc. needs to be finalized
by the recorder to play on this unit. Please refer to
the recorder’s instructions.
BD-Video
3D
3D videos and 3D still pictures can be played
back when this unit is connected to a 3D
compatible TV using a High Speed HDMI
Cable.
Music CD
Operation and sound quality of CDs that do not
conform to CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed.
SD card
miniSD Cards, microSD Cards,
microSDHC Cards and
microSDXC Cards can be used,
but must be used with an adaptor
card. These are usually supplied
with such cards, or otherwise
customer provided.
To protect the card’s contents,
move the record prevention tab (on the SD
card) to “LOCK”.
This unit is compatible with SD Memory Cards
that meet SD Card Specifications FAT12 and
FAT16 formats, as well as SDHC Memory
Cards in FAT32 format and SDXC Memory
Cards in exFAT.
If the SD card is used with incompatible
computers or devices, recorded contents may
be erased due to the card being formatted etc.
Useable memory may be slightly less than the
card capacity.
USB device
This unit does not guarantee connection with all
USB devices.
This unit does not support USB device
charging.
FAT12, FAT16, FAT32 and NTFS file systems
are supported.
This unit supports USB2.0 High Speed.
This unit can support an HDD formatted to
FAT32 and NTFS.
Some types of HDD may require the use of its
external power supply unit.
It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method and how the files were
created.
The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in these operating instructions. Read the disc’s
instructions carefully.
This unit supports high bit rate audio (Dolby
Digital Plus, Dolby TrueHD, DTS-HD High
Resolution Audio and DTS-HD Master Audio)
adopted in BD-Video.
2D video can be enjoyed as 3D virtually. (> 29)
BD-RE, BD-R
Discs recorded in DR mode using Panasonic
Blu-ray Disc recorders may not play back the
audio etc., correctly.
DMP-BDT320GNGCGA-VQT3V87.book 7 ページ 2012年2月9日 木曜日 午後3時12分
8
VQT3V87
Control reference guide
1 Standby/on switch (Í/I) (> 14)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
7 CALL LED
The LED will light up when this unit receives
incoming call etc. of the video
communication. (> 23)
8 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
9 Display
Rear panel terminals (> 11–13)
INTERNET
R G B Y
OPTION
RETURN
HOME
KEYS
1
2
3
4
5
6
7
8
10
9
1 Turn the unit on and off
2 Show the Home screen of the VIERA
Connect (> 23)
3 Show HOME menu (> 17)
4 Touchpad (> 9)
Used for various operation
Move the highlight, confirm the selection, etc.
5 Show Option menu (> 27)
6 Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display
7 Start up a video communication (> 23)
8 Set up 3D effects (> 29)
9 Show KEYS screen on the screen (> 10)
10 Return to previous screen
132
456
87
9 1110 12
Pull to flip down the
front panel.
2 Disc slot (> 17)
3 Slot-in LED
4 Eject the disc* (> 17)
5 Stop* (> 19)
6 Start play* (> 19)
10 Smart eco-sensor (> 16)
11 SD card slot (> 17)
12 USB port (> 17)
* These buttons work just by touching the marks.
The volume of operation sound can be adjusted by “Unit
Operation Volume” . (> 35)
DMP-BDT320GNGCGA-VQT3V87.book 8 ページ 2012年2月9日 木曜日 午後3時12分
Getting started
9
VQT3V87
Using the touchpad
The touchpad of the remote control is used for
various operations such as moving the highlight
or pointer, confirming the selection, playback
control, entering characters, etc.
Basic touchpad operation
Move the highlight or the pointer
While touching the touchpad, the highlight or
pointer will move according to the movement of
your finger.
e.g.,
You can move the highlight continuously to up,
down, left and right, by touching and holding an
edge of the touchpad.
It may not work depending on the screen.
Confirm the selection
Tap the touchpad to confirm the selection.
Release your finger as soon as it touches the
touchpad.
Player Settings
Network
Language
3D
Sound
Picture
Switching the screen
Some screens can be switched by lightly flicking
your finger horizontally or vertically on the
touchpad.
Flick your finger quickly and release from the
touchpad.
e.g.,
Bad example of flicking
Finger stops on the touchpad
Movement is too slow
It may not operate correctly in following cases:
Operate with your fingernails
Operate wearing gloves
Operate with wet hand
Do not press the touchpad with pointed objects such as
ballpoint pen, etc., or press with excessive force.
DMP-BDT320GNGCGA-VQT3V87.book 9 ページ 2012年2月9日 木曜日 午後3時12分
10
VQT3V87
Using the KEYS screen
The KEYS screen that can perform item
selection, playback control, text input, etc., is
displayed on the screen when [KEYS] is pressed.
KEYS screen operation will take priority over all
other operation on the screen.
1 Select the screen to operate by pressing
on [KEYS] several times.
(> below, Types of KEYS screen)
Screen can also be switched by flicking
horizontally.
2 Move the pointer onto the key to select.
3 Release your finger and then tap.
To hide the KEYS screen
Press [RETURN].
Types of KEYS screen
Following screens switch in turn each time
[KEYS] is pressed.
1 Select title numbers, etc./Enter numbers or
characters
2 Show Top menu (> 21)
3 Show Pop-up menu (> 21)
4 Show status messages (> 21)
5[3, 4, 2, 1] :
Move the highlight for selection
[OK] : Confirm the selection
6 Change the display position of the KEYS
screen. The position switches each time the
key is selected.
7 Basic playback control buttons (> 19)
[HOME], [KEYS], [OPTION] and [RETURN]
indications are only for guidance purpose.
Selection of these keys is not possible on the
KEYS screen.
23
4
5
6
7
1
Entering characters
1 When the keyboard screen appears:
Move the highlight or the pointer onto
“Input Mode”, then tap.
You can select the input method from two
types as follows. The mode switches each
time “Input Mode” is selected.
Mode 1:
The highlight moves vertically or horizontally
as your finger moves on the touchpad.
e.g.,
Mode 2:
The pointer moves freely according to the
movement of your finger.
2 Move the highlight or the pointer onto a
key, then tap.
Symbols Alphanumeric Other Characters
Input Nickname
Shift
Input Mode
Delete
Finish
User 2
L
Input Nickname
Shift
Input Mode
Delete
Finish
User 2
Symbols Alphanumeric Other Characters
Select to move the cursor in the text box
e.g.,
DMP-BDT320GNGCGA-VQT3V87.book 10 ページ 2012年2月9日 木曜日 午後3時12分
Connections and settings
11
VQT3V87
Connections and se ttings
STEP 1 : Connecting to a TV
Perform either one of the following connections in accordance with your TV input terminal.
Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
Do not connect video signals through a video recorder. Due to copy guard protection the picture may
not be displayed properly.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use
HDMI cables 5.0 meters or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
Connect terminals of the same colour.
Getting started
Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
[For]the] M iddle]East ]and]South]East]A sia] The HDMI-compliant cable is supplied with this unit.
HDMI AV OUT (High quality)
HDMI cable
(only supplied for the Middle East and South East Asia)
HDMI IN
VIDEO OUT (Standard quality)
Audio/Video cable
VIDEO IN
AUDIO IN
L
R
DMP-BDT320GNGCGA-VQT3V87.book 11 ページ 2012年2月9日 木曜日 午後3時12分
12
VQT3V87
STEP 2 : Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV
OUT, then connect the TV and the amplifier/receiver. Please note, however, that the audio can only
be up to 5.1ch.
When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is
also required to connect the amplifier/receiver and TV using an optical digital cable.
Set “HDMI Audio Output” to “Off” (> 31).
Set “Digital Audio Output” (> 31).
HDMI AV OUT
HDMI cable
(only supplied for the Middle East and South East Asia) HDMI cable
Amplifier/receiver
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
Set “Digital Audio Output” (> 31).
OPTICAL
Optical digital cable
Amplifier/receiver
OPTICAL IN
DMP-BDT320GNGCGA-VQT3V87.book 12 ページ 2012年2月9日 木曜日 午後3時12分
Connections and settings
13
VQT3V87
STEP 3 : Connecting to the network
The following services can be used when this unit is connected to broadband.
For details about connection method, refer to the instructions supplied with the connected equipment.
For up-to-date compatibility information on your wireless router, refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
See page 44 for the precautions of wireless LAN connection.
Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
STEP 4 : Connecting the AC mains lead
This unit consumes a small amount of AC power (> 43) even when turned off. In the interest of
power conservation, if you will not be using this unit for an extended period of time, it can be
disconnected.
Firmware can be updated (> 15)
You can enjoy BD-Live (> 22)
You can enjoy VIERA Connect (> 23)
You can access other devices (Home Network)
(> 24)
This unit supports Wi-Fi Direct
TM
and can make a
wireless connection to wireless devices without router.
You can use this function when enjoying Home Network
feature, etc. Internet access is not available while
connected via Wi-Fi Direct
TM
. (
>
24, 33)
Wireless LAN connection
This unit can be connected to a wireless router wirelessly.
Wireless router, etc. Internet
The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.
LAN cable connection
LAN Cable
Broadband router, etc.
Internet
[For]the]Middle]East] Use the AC mains lead that matches the socket for the area you live in.
[For\Saudi\Arabia]
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE
CONNECTION.
[For[South[East[A sia]
AC mains lead with a label is for Thailand.
AC mains lead without a label is for areas other than Thailand.
To a household
mains socket
AC mains lead (supplied)
DMP-BDT320GNGCGA-VQT3V87.book 13 ページ 2012年2月9日 木曜日 午後3時12分
14
VQT3V87
After connecting your new player for the first time
and pressing [Í], a screen for the basic settings
will appear.
Preparation
Turn on the television and select the
appropriate video input on the television.
1 Press [Í].
Setup screen appears.
2 Follow the on-screen instructions and
apply the settings.
STEP 5 : Settings
Easy Setting
You can perform this setup anytime by selecting “Easy
Setting” in the Setup menu. (> 34)
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then the setting information on the TV is acquired by this
unit.
Easy Network Setting
After completing “Easy Setting”, you can perform
“Easy Network Setting”.
Select “Wired” or “Wireless”.
“Wired” connection
Follow the on-screen instructions to apply your
connection settings.
“Wireless” connection
Before beginning wireless connection setup
Obtain your network name (SSID*
1
).
If your wireless connection is encrypted,
please be sure that you know your
encryption key.
Select “Search for wireless network” or “WPS
(PUSH button)”, then follow the on-screen
instructions and apply the settings.
e.g.,
WPS (PUSH button):
If your wireless router supports
WPS (PUSH button), you can
easily perform the settings by
pressing WPS button on it.
RETURN
Easy Network Setting
Wired
Wireless
Select a connection mode.
Current setting : Wired
OK
Wireless Settings
Select a connection method to wireless access point.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button)
*
2
e.g.
DMP-BDT320GNGCGA-VQT3V87.book 14 ページ 2012年2月9日 木曜日 午後3時12分
Connections and settings
15
VQT3V87
If your wireless network is encrypted,
Encryption Key input screen will be displayed.
Input the encryption key of your network.
Refer to the operating instructions of the hub or router.
You can perform this setup anytime by selecting “Easy
Network Setting” in the Setup menu. (> 33)
You can redo these settings individually using “Network
Settings”. (> 33)
Do not use this unit to connect to any wireless network for
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
not have usage rights may be displayed; however, using
these networks may be regarded as illegal access.
After performing network settings on this unit, the settings
(encryption level, etc.) of the wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of the wireless router.
Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
*1
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network. Transmission
is possible if the SSID matches for both devices.
*2
The wireless router compatible with Wi-Fi Protected
Setup
TM
may have the mark.
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
To update the firmware
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, “FINISH” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 35,
“Firmware Version Information”)
Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 35)
WPS (Wi-Fi Protected Setup
TM
) is a standard that
facilitates settings relating to the connection and
security of wireless LAN devices.
1 Press WPS button or corresponding button of
the wireless router until the lamp starts
flashing.
For details, refer to the operating instruction
of the wireless router.
2 Select “Start”.
Search for wireless network:
When you select “Search for wireless network”,
the available wireless networks will be
displayed. Select your network name.
If your network name is not displayed, search
again by pressing the red button on the
remote control.
Stealth SSID will not be displayed when you
select “Search for wireless network”. Enter
manually by using “Manual setting”.
(Press [HOME] > select “Setup” > select
“Player Settings” > select “Network” > select
“Network Settings” > select “Wireless
Settings” > select “Connection Setting” >
select “Manual setting”)
Firmware updates
Press [HOME] > select “Setup” > select
“Player Settings” > select “System” > select
“Firmware Update” > select “Update Now”
New firmware is available.
Please update firmware in Setup.
The firmware has been updated.
Current Version:
x.xx
DMP-BDT320GNGCGA-VQT3V87.book 15 ページ 2012年2月9日 木曜日 午後3時12分
16
VQT3V87
STEP 6 : Reprogramming
the remote control
If you have more than one Panasonic player/
recorder and the remote control operates both
products at once, you will need to change the
remote control code to prevent this occurrence.
(> 35, “Remote Control”)
Smart eco-sensor
This mode will decrease the power consumption
when the unit is in standby mode and the sensor
does not detect people close by.
Preparation
Set “Quick Start” to “On (Smart eco-sensor)”
(> 35).
Sensor detection range image and operation
of the unit
A Sensor detection range (at i20eC) :
Within a distance of approx. 5 m and an
angle of 20e up and down and 30e left and
right from the unit
The power consumption is minimal when
people are out of the detection range for
more than 30 minutes.
The following will occur when there is a
movement within the detection range, such
as someone walking into the room where
this unit is placed.
Speed of startup from the standby mode
will increase.
Idle power consumption will increase.
(About the power consumption > 43)
B The slot-in LED will light up when there is a
movement in immediate proximity of this unit,
such as inserting a disc.
This function does not work under the following
conditions.
For about 1 minute after connecting the AC mains lead.
The unit is placed in a glass-fronted cabinet.
The detection sensitivity may be reduced under the
following conditions.
The room temperature is close to the body temperature.
The unit is exposed to direct sunlight or close to heating
appliances.
People are approaching straight to the unit.
Other than listed above, temperature change or some
interference, etc., can affect the detection sensitivity.
DMP-BDT320GNGCGA-VQT3V87.book 16 ページ 2012年2月9日 木曜日 午後3時12分
Playback
17
VQT3V87
Playback
Inserting or removing
media
Notes
When inserting a media item, ensure that it is
facing the right way up.
When removing the SD card, press the centre
of the card and pull it straight out.
If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
HOME menu
Major functions of this unit can be operated from
the HOME menu.
Preparation
Turn on the television and select the appropriate
video input on the television.
1 Press [Í] to turn on the unit.
If there are any other items, repeat this
step.
To show the HOME menu
Press [HOME].
Items to be displayed may vary with the media.
Inserting disc in the disc slot
The disc will be pulled in when inserted
partially.
The power will be turned on automatically when
the disc is inserted while in the standby mode.
To eject the disc
Touch
[
<
].
Remove the disc with your hands once the disc
is ejected partially. If the disc is not removed,
the unit will pull in the disc for safety reasons. In
this case, playback does not start automatically.
To insert the disc that was ejected partially, do
not force the disc back in, but re-insert it after
removing the disc completely.
Do not leave the disc that is ejected partially. It
is recommended to completely take out the disc
from this unit if the disc is not planned to be
used.
Use the front USB port when you connect a
USB memory or a USB HDD. The USB port on
the rear panel is only for the Communication
Camera.
Connections and settings
2 Operate the touchpad to select the item.
Tap to select the centred item.
Swipe or flick your finger up, down, left, or
right to select other items.
Videos/Photos/Music
Disc
Play back the contents.
(> 19)
When multiple contents are
recorded, select the types
of contents or the title.
SD Card
USB
Network
Network
Service
Displays the Home screen of
VIERA Connect. (> 23)
Home Network
DLNA Client (> 24)
Media Renderer (> 25)
Setup
Player Settings
(> 30)
SD Card
Management
(> 22)
Wallpaper
Changes the background of
HOME menu.
MusicPhotos Setup
Network
HOME
Blu-ray Disc Player
Register
1st user
Videos
DMP-BDT320GNGCGA-VQT3V87.book 17 ページ 2012年2月9日 木曜日 午後3時12分
18
VQT3V87
Multi User Mode
Multi User Mode is a function that enables
switching of multiple settings easily.
Up to 4 people can use the unit with their own
settings.
The following settings can be personalized.
The user icon
The wallpaper of HOME menu
The audio and picture settings (> 27, 30)
A The user name and icon currently selected
B Personalize a new user and switch the users
with coloured buttons.
1 Press [HOME].
2 Press a coloured button that indicates
new user personalization.
3 Select an item and change the settings
according to the indications.
The following items can be set.
To change the personalized user information
Select “Edit User Information” from Setup menu.
(> 35)
There are three ways to switch the user as
follows.
Using coloured buttons
Press the coloured buttons in the HOME menu
to switch to the user corresponding to the
button.
Using facial recognition
(Only when connected to Communication
Camera > 23)
This is a function for fun using the Communication
Camera and enables user switching by facial
recognition. Perform “Create from Photos” (> left)
to personalize your facial photo before using this
function.
2 Turn the face to Communication Camera.
The camera captures your face and
determines the closest face from the
personalized user photos, and then displays
the results.
Accuracy of the recognition may be
reduced depending on the captured image.
3 Follow the indications on the screen.
To redo the facial recognition, press
[RETURN].
Using registered smartphones
When the unit is turned on using the
registered smartphone, the user who
registered the smartphone will automatically
be selected.
Perform the “Remote Device Settings”. (> 33)
To use smartphones as a remote control, installation of
dedicated software is required. For more details, refer to
the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Personalizing a new user
Input
Nickname
Personalize a user name.
Select Icon
Personalize a user icon.
Select from Illustrations
The image can be selected from
prepared illustrations.
Create from Photos
If the Communication Camera is
connected, you can shoot and
personalize your photo.
You can also select a photo in
recording media as an icon.
(> 27, “Icon Registration”)
Select
Wallpaper
Personalize a background of the
HOME menu.
Other than prepared
wallpapers, you can also select
a photo in recording media as a
wallpaper. (> 27, “Wallpaper”)
A
B
MusicPhotos Setup
Network
HOME
Blu-ray Disc Player
User 1
Register
2nd user
User 1
Videos
Register
Smartphone
Smartphone used as a remote
control can be registered with
respect to each user.
Multiple users cannot be
registered for one smartphone.
4 Select “Confirm”.
Switching the user
1 Press [OPTION] in the HOME menu and
select “Facial Recognition”.
DMP-BDT320GNGCGA-VQT3V87.book 18 ページ 2012年2月9日 木曜日 午後3時12分
Playback
19
VQT3V87
Playback
1 Insert the media.
Playback starts depending on the media.
Repeat this procedure if necessary.
To save on electricity, the unit is turned off automatically if
there is no button operation for about 30 minutes when not
playing back (such as when paused, displaying the menu,
displaying still pictures, etc.).
Following functions may not work depending on
the media and contents.
The stopped position is memorized.
Resume play function
On BD-Video discs including BD-J, the
resume play function does not work.
2 Select the item to play.
Signal from PAL discs is output as PAL. Signal from NTSC
discs is output as “NTSC” or “PAL60”. You can select
“NTSC” or “PAL60” in “NTSC Contents Output” for NTSC
discs. (> 30)
DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Select [] from the KEYS screen when you
have finished playback to protect the unit’s motor, your
television screen and so on.
DivX and MKV: Successive play is not possible.
It is not possible to play back AVCHD and MPEG2 video
which have been dragged and dropped, copied and pasted
to the media.
Operations during playback
1 Repeatedly press [KEYS] to display the
playback control screen.
2 Select a key.
See page 10 for the KEYS screen operation.
Stop
Select [1] (PLAY) to restart from this position.
The position is cleared if the disc is ejected or
you select [] several times to display “STOP”
on the unit’s display.
DMP-BDT320GNGCGA-VQT3V87.book 19 ページ 2012年2月9日 木曜日 午後3時12分
20
VQT3V87
Search
Music and MP3: The speed is fixed to a single
step.
Slow-motion
BD-Video and AVCHD: [5] only.
The speed increases up to 5 steps.
Skip to the title, chapter or track.
You can change the audio channel number or
soundtrack language, etc.
Pause
Select [;] again or [1] (PLAY) to restart play.
Frame-by-frame
1 While paused, repeatedly press [KEYS] to
display the cursor key screen.
2 Select [2] or [1].
Select [1] (PLAY) to revert to normal playback
speed.
BD-Video and AVCHD: [1] only.
Search/Slow-motion
While playing, select [6] or [5].
While paused, select [6] or [5].
Select [1] (PLAY) to revert to normal playback
speed.
Skip
Skip backward
10 seconds
It will play back after skipping backward
approximately 10 seconds every time the key is
selected.
Changing audio
Quick playback control
Basic operation can be performed by swiping the
edge of the touchpad with your finger, such as the
following.
Perform the operation when the KEYS screen
is not displayed.
Stop
Play
Pause
Frame-by-frame
(during pause)
Forward: Swipe your
finger from left to
right.
Backward: Swipe
your finger from right
to left.
Search forward
Search backward
Skip forward
Skip backward
or
DMP-BDT320GNGCGA-VQT3V87.book 20 ページ 2012年2月9日 木曜日 午後3時12分
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Panasonic DMP-BDT320 User manual

Category
Blu-Ray players
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI