Sinclair NIM10 User manual

Sinclair
Brand
Sinclair
Model
NIM10
Type
User manual

Sinclair NIM10 is designed specifically for Small SDV4 (10-26kW). It provides the OAE ports and Small SDV4 can be connected to the Gateways (CCM08, CCM-18A, ...) and IMM network control system to realize network electricity distribution. Wiring diagram:

  • OAE ports: connected to OAE port of ammeter.
  • PQE ports: connected to PQE port of outdoor unit.
  • Each port of M-interface gateway only can be connected with one NIM10 through K1 K2 E ports.
  • Can set the network address through S1 dial on the main board of NIM10.

Sinclair NIM10 is designed specifically for Small SDV4 (10-26kW). It provides the OAE ports and Small SDV4 can be connected to the Gateways (CCM08, CCM-18A, ...) and IMM network control system to realize network electricity distribution. Wiring diagram:

  • OAE ports: connected to OAE port of ammeter.
  • PQE ports: connected to PQE port of outdoor unit.
  • Each port of M-interface gateway only can be connected with one NIM10 through K1 K2 E ports.
  • Can set the network address through S1 dial on the main board of NIM10.
FULL DC INVERTER SYSTEMS
SERVICE MANUAL
NIM 10
C O M M E R C I A L A I R C O N D I T I O N E R S S D V 4
Original instructions
IMPORTANT NOTE:
Read this manual carefully before installing or operating
your new air conditioning unit. Make sure to save this
manual for future reference.
Electriicity disttribution module NIM10
NIM10 is ddesigned sppecifically forr Small SDV4 (10-26kW). It provides thhe OAE ports and Small SDV4 can be
connected tto thee Gateways (CCM08, CCM-18A, ...) and IMM netwoork control ssystem to realize network
electricityy distribution.
WWiring diagram
OAE portss: connectedd to OAE poort of ammetter.
PQE portss: connectedd to PQE poort of outdooor unit.
Each portt of M-interfaace gatewayy only can be
e connecte
dd with one NIM10 through K1 KK2 E ports.
Can set thhe network aaddress throough S1 dial on the main board of NIM10.
Small SDV4
NOTE CONCERNING PROTECTION OF
ENVIRONMENT
This product must not be disposed of via normal household waste after its service life, but must be
taken to a collection station for the recycling of electrical and electronic devices. The symbol on the
product, the operating instructions or the packaging indicate such disposal procedures. The materials
are recyclable in accordance with their respective symbols. By means of re-use, material recycling or
any other form of recycling old appliances you are making an important contribution to the protection
of our environment. Please ask your local council where your nearest disposal station is located.
-
In case of quality problem or other please contact your local supplier or authorized service center.
Emergency number: 112
PRODUCER
SINCLAIR CORPORATION Ltd.
1-4 Argyll St.
London W1F 7LD
Great Britain
www.sinclair-world.com
This product was manufactured in China (Made in China).
REPRESENTATIVE
SINCLAIR EUROPE spol. s r.o.
Purkynova 45
612 00 Brno
Czech Republic
TECHNICAL SUPPORT
NEPA spol. s r.o.
Purkynova 45
612 00 Brno
Czech Republic
Tel.: +420 800 100 285
Fax: +420 541 590 124
www.sinclair-solutions.com
info@sinclair
solutions.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Sinclair NIM10 User manual

Sinclair
Brand
Sinclair
Model
NIM10
Type
User manual

Sinclair NIM10 is designed specifically for Small SDV4 (10-26kW). It provides the OAE ports and Small SDV4 can be connected to the Gateways (CCM08, CCM-18A, ...) and IMM network control system to realize network electricity distribution. Wiring diagram:

  • OAE ports: connected to OAE port of ammeter.
  • PQE ports: connected to PQE port of outdoor unit.
  • Each port of M-interface gateway only can be connected with one NIM10 through K1 K2 E ports.
  • Can set the network address through S1 dial on the main board of NIM10.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers