Airlink101 ABT-U200 User manual

Airlink101
Brand
Airlink101
Model
ABT-U200
Category
Networking
Type
User manual

Airlink101 ABT-U200 is a Bluetooth 2.0 USB Adapter that allows you to connect your computer to other Bluetooth-enabled devices, such as mobile phones, headsets, and speakers. It supports all the major Bluetooth profiles, including A2DP, AVRCP, HSP, and HFP, making it compatible with a wide range of devices. The ABT-U200 is easy to install and use. Simply insert the USB adapter into an available USB port on your computer and install the provided software. Once the software is installed, you can start using the ABT-U200 to connect to other Bluetooth devices. The ABT-U200 is a versatile device that can be used for a variety of purposes. You can use it to stream music from your mobile phone to your computer speakers, make and receive calls using a Bluetooth headset, or transfer files between your computer and other Bluetooth devices.

Airlink101 ABT-U200 is a Bluetooth 2.0 USB Adapter that allows you to connect your computer to other Bluetooth-enabled devices, such as mobile phones, headsets, and speakers. It supports all the major Bluetooth profiles, including A2DP, AVRCP, HSP, and HFP, making it compatible with a wide range of devices. The ABT-U200 is easy to install and use. Simply insert the USB adapter into an available USB port on your computer and install the provided software. Once the software is installed, you can start using the ABT-U200 to connect to other Bluetooth devices. The ABT-U200 is a versatile device that can be used for a variety of purposes. You can use it to stream music from your mobile phone to your computer speakers, make and receive calls using a Bluetooth headset, or transfer files between your computer and other Bluetooth devices.

Quick Installation Guide
Bluetooth® 2.0 USB Adapter
Model # ABT-U200
This Quick Installation Guide only provides basic instructions for installing the
product. For detailed information on using this product, please refer to the
User’s Manual on the supplied CD.
Installing the Software in Windows XP/2000/ME
Note: Do not connect the USB Bluetooth Adapter to your computer before you
install the provided software. You will be prompted to plug the device during the
installation.
Step 1 Insert the Bluetooth software installation CD into your CD-ROM drive.
When the auto-run screen appears, select Install Utility and Driver for
XP/2K/ME
Section 1
Ver. 1A
Package Content:
• Bluetooth® 2.0 USB
Adapter
• Driver & Utility CD
• Quick Installation Guide
Note: If the auto-run window does not appear automatically, go to Start -> Run
and type D:\Utility\XP_2K_ME\Setup.exe (where D is the letter of your CD-
ROM drive) then click OK.
Step 2 When the welcome screen appears, click Next. Then click Next on the
two screens that follow, then click Install.
Windows XP/2000 Users: When the Driver Signature Notice window
appears, click OK.
Step 3 When prompted, plug your Bluetooth USB adapter into an available
USB port on your computer and click OK.
Please wait while the software installs all the supported services. This may take
several minutes.
Windows 2000/ME Users: You may be prompted to restart your computer a
few times during the installation. Ignore the prompts until the installation is
complete.
Step 4 At the end, click Finish to complete the installation.
Windows 2000/ME Users: At the end of the installation, you will be prompted
to restart your computer. Click OK to restart.
The Initial Bluetooth Configuration Wizard will automatically launch to guide
you through the initial configuration.
Step 5 Click Next at the Initial Bluetooth Configuration Wizard screen.
Step 6 Enter a unique name to identify your computer and select a computer
type, then click Next.
Step 7 Click Next at the following screen
Step 8 This screen allows you select the services you want to provide to other
Bluetooth devices. If you wish to have all services available, make sure that
they are all checked and click Next.
Step 9 Click Skip at the following screen.
Step 10 Click Finish. Your device is now installed and ready to use. Please
refer to the manual located on the CD for detailed instructions on configuring
and using the Bluetooth USB adapter.
Installing the Software in Windows Vista
Note: Do not connect the USB Bluetooth Adapter to your computer before you
install the provided software. You will be prompted to plug the device during the
installation.
Step 1 Insert the Bluetooth software installation CD into your CD-ROM drive.
When the auto-run screen appears, select Install Utility and Driver for Vista
Note: If the auto-run window does not appear automatically, go to Start -> All
Programs -> Accessories -> Run and type D:\Utility\Vista\Setup.exe (where D
is the letter of your CD-ROM drive) and click OK.
Section 2
Step 2 If the following warning window appears, click Allow to continue with
the installation.
Step 3 When the following screen appears, connect the Bluetooth USB adapter
to an available USB port on your computer.
Step 4 At the welcome screen, click Next. Then click Next on the two screens
that follow until you get to the Install Screen.
Step 5 Click Install to install the Bluetooth software.
Please wait while the software installs all the supported services. This may take
several minutes.
Step 6 The following Windows Security alert may appear a few times during the
installation. Click Install this driver software anyway to continue installing
the software.
Step 7 At the end, click Finish. Your device is now installed and ready to use.
Please refer to Section 3 in the manual located on the CD for detailed
instructions on configuring and using the Bluetooth USB adapter.
Technical Support
E-mail: support@airlink101.com
Toll Free: 1-888-746-3238
Website: www.airlink101.com
*Actual data throughput will vary. Network conditions and environmental factors, including volume
of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate. Environmental factors will adversely affect wireless signal range. Specifications are
subject to change without notice. All products and trademarks are the property of their respective
owners. Copyright ©2007 Airlink101®
Section 3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Airlink101 ABT-U200 User manual

Airlink101
Brand
Airlink101
Model
ABT-U200
Category
Networking
Type
User manual

Airlink101 ABT-U200 is a Bluetooth 2.0 USB Adapter that allows you to connect your computer to other Bluetooth-enabled devices, such as mobile phones, headsets, and speakers. It supports all the major Bluetooth profiles, including A2DP, AVRCP, HSP, and HFP, making it compatible with a wide range of devices. The ABT-U200 is easy to install and use. Simply insert the USB adapter into an available USB port on your computer and install the provided software. Once the software is installed, you can start using the ABT-U200 to connect to other Bluetooth devices. The ABT-U200 is a versatile device that can be used for a variety of purposes. You can use it to stream music from your mobile phone to your computer speakers, make and receive calls using a Bluetooth headset, or transfer files between your computer and other Bluetooth devices.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents