Push the truck to
ring its bell!
1. Open the front of the
truck, as shown. Remove
the pony figure from the
driver’s seat.
3. Turn the ice cream
cone on the top of the
truck, as shown.
2. Remove the truck
seat, turn it around,
and reinsert it so that
the seat is facing the
inside of the truck.
Sit the included pony
figure in the seat!
The truck also converts into an ice cream parlor.
6. Pull down the
freezer container for
ice cream toys: 1 ice
cream scooper and
3 ice cream cones.
5. Press and fit the
table into the
center of the roof.
Time for ice cream!
To convert the parlor back into a truck: reverse the orientation of the
truck seat; remove the table, and place it inside the vehicle; close the
freezer, close the front and top of the truck; and move the ice cream
cone on the top of the truck to its original position.
4. Lift open the top
of the truck.
Truck Seat
Ice Cream
Cone
Table