BLACK + DECKER BEHT200 User manual

Category
Power hedge trimmers
Type
User manual
Please read before returning this product for any reason.
àLIRE avant de retourner ce produit pour quelque raison que ce soit.
LEA EL MANUAL antes de devolver este producto por cualquier motivo.
INSTRUCTION MANUAL
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES
final page size: 8.5 x 5.5 in
HEDGE TRIMMER
TAILLE-HAIE
PODADORA DE SETOS
BEHT200
BEHTS300
BEHT350
BEHTS400
ENGLISH
English (original instructions) 1
Français (traduction de la notice d’instructions originale) 9
Español (traducido de las instrucciones originales) 18
To register your new product, visit
www.BlackandDecker.com/NewOwner
Consulter le site Web www.BlackandDecker.com/NewOwner
pour enregistrer votre nouveauproduit.
Visite www.BlackandDecker.com/NewOwner para registrar su
nuevoproducto.
Thank you for choosing BLACK+DECKER!
If you have a question or experience a problem with your
BLACK+DECKER purchase, go to: http://www.blackanddecker.com/
instantanswers
If you can’t find the answer or do not have access to the Internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. – Fri. to speak with
an agent. Please have the CATALOG NUMBER available when youcall.
KEY INFORMATION YOU SHOULD KNOW
To insure extension cord does not come loose see Fig. E for properattachment.
In order to operate the trimmer, the lock button must first be pulled back (see Fig. F) then squeezetrigger.
RENSEIGNEMENTS IMPORTANTS
Afin de s’assurer que la rallonge ne se débranche pas, la raccorder conformément aux Fig.E.
Pour faire fonctionner l’outil, on doit tirer sur le bouton de verrouillage (Fig. F), puis enfoncer l’actionneur
vers le haut.
INFORMACION CLAVE QUE DEBE SABER
Para asegurarse de que el cable de extensión no se vaya a soltar, ver Figura E para su acopleapropiado.
Para operar el cortacerco, primero tire del botón de seguridad hacia atrás (ver Figura F) y luego apriete el
accionador
ENGLISH
1
English (original instructions)
1
Blade
2
Guard
3
Bail Handle
4
Lock Off Button
5
Trigger Switch
6
Switch Handle
7
Cord Retainer
8
sawBLADE™ (BEHTS300, BEHTS400)
9
sawBLADE™ shoe (BEHTS300, BEHTS400)
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or propertydamage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or
seriousinjury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or
seriousinjury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderateinjury.
(Used without word) Indicates a safety relatedmessage.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in
propertydamage.
WARNING! Read all safety warnings
and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/
or seriousinjury.
WARNING: To reduce the risk of injury,
read the instructionmanual.
Fig. A
9
8
1
3
2
4
5
7
6
9
8
BEHTS300 / BEHTS400
ENGLISH
2
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings
and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/
or seriousinjury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
powertool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas inviteaccidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust orfumes.
c ) Keep children and bystanders away while
operating a power tool. Distractions can cause you
to losecontrol.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electricshock.
b ) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed orgrounded.
c ) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electricshock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electricshock.
e ) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electricshock.
f ) If operating a power tool in a damp location
is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI
reduces the risk of electricshock.
3) Personal Safety
a ) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personalinjury.
b ) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personalinjuries.
c ) Prevent unintentional starting. Ensure the
switch is in the off position before connecting to
power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
finger on the switch or energizing power tools that
have the switch on invitesaccidents.
d ) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personalinjury.
e ) Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpectedsituations.
f ) Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or
long hair can be caught in movingparts.
g ) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-relatedhazards.
4) Power Tool Use and Care
a ) Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it wasdesigned.
b ) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
berepaired.
c ) Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power
toolaccidentally.
d ) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrainedusers.
e ) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained powertools.
f ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier tocontrol.
g ) Use the power tool, accessories and tool bits, etc.
in accordance with these instructions, taking
ENGLISH
3
into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could result
in a hazardoussituation.
5) Service
a ) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool ismaintained.
Hedge Trimmer Safety Warnings
DANGER: Keep hands away from
blade. Contact with blade will result in serious
personalinjury.
Use both hands when operating the hedge trimmer.
Using one hand could cause loss of control and
result in serious personalinjury.
Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure
the switch is off when clearing jammed material.
Blades coast after turn off. A moment of inattention
while operating the hedge trimmer may result in serious
personalinjury.
Carry the hedge trimmer by the handle with the
cutter blade stopped. Proper handling of the hedge
trimmer will reduce possible personal injury from
the cutter blades.
Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
Keep extension cord away from cutting area. During
operation the extension cord may be hidden in
shrubs and can be accidentally cut by the blade.
Check the hedge for foreign objects, e.g. wirefences.
WARNING: Do not expose torain.
WARNING: Only use with bail handle
and guard properly assembled to hedge trimmer. The
use of the hedge trimmer without the proper guard or
handle provided may result in serious personalinjury.
WARNING: Remove plug from the outlet
immediately if the extension cord becomes damaged
orcut.
WARNING: Some dust created by
this product contains chemicals known to the
State of California to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicalsare:
compounds in fertilizers
compounds in insecticides, herbicides and
pesticides
arsenic and chromium from chemically treated
lumber
To reduce your exposure to these chemicals, wear approved
safety equipment such as dust masks that are specially
designed to filter out microscopicparticles.
If using an extension cord outdoors, it is absolutely
necessary to use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electricshock.
To reduce the risk of disconnection of appliance cord from
the extension cord during operating:
i) Make a knot as shown in below; or
ii) Use one of the plug-receptacle retaining straps or
connectors described in thismanual.
OR
iii) Secure the extension cord to the appliance plug as
shown or described in the OperatingInstructions.
WARNING: To reduce the risk of personal
injury due to a loose electrical connection between
the appliance’s plug and extension cord, firmly and
fully attach the appliance plug to the extension cord.
Periodically check the connection while operating to
ensure it is fully attached. Do not use an extension
cord that provides a loose connection. A loose
connection may result in overheating, fire, and
increases the risk of aburning.
An extension cord must have adequate wire size
(AWG or American Wire Gauge) for safety. The smaller
the gauge number of the wire, the greater the capacity
of the cable, that is, 16 gauge has more capacity than 18
gauge. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. When using
more than one extension to make up the total length,
be sure each individual extension contains at least the
minimum wire size. The following table shows the correct
size to use depending on cord length and nameplate
ampere rating. If in doubt, use the next heavier gauge. The
lower the gauge number, the heavier thecord.
ENGLISH
4
Minimum Gauge for Cord Sets
Volts
Total Length of Cord in Feet
(meters)
120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7)
240 V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)
Ampere Rating
American Wire Gauge
More
Than
Not
More
Than
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
The label on your tool may include the following symbols. The
symbols and their definitions are asfollows:
V ......................... volts
Hz .......................hertz
min ..................... minutes
or DC ......direct current
...................... Class I Construction
(grounded)
…/min ..............per minute
BPM .................... beats per minute
IPM ..................... impacts per minute
RPM .................... revolutions per
minute
sfpm ................... surface feet per
minute
SPM .................... strokes per minute
A ......................... amperes
W ........................watts
or AC ...........alternating current
or AC/DC .... alternating or
direct current
...................... Class II
Construction
(double insulated)
n
o
.......................no load speed
n .........................rated speed
......................earthing terminal
.....................safety alert symbol
.....................visible radiation
..................... wear respiratory
protection
..................... wear eye
protection
..................... wear hearing
protection
..................... read all
documentation
CSPM .................. cut strokes per
minute
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
COMPONENTS (FIG. A)
WARNING: Never modify the power
tool or any part of it. Damage or personal injury
couldresult.
Refer to Figure A at the beginning of this manual for a
complete list ofcomponents.
Intended Use
This hedge trimmer is designed for residential
trimmingapplications.
DO NOT use under wet conditions or in presence of
flammable liquids orgases.
This hedge trimmer is a residential power tool. DO NOT
let children come into contact with the tool. Supervision is
required when inexperienced operators use thistool.
ASSEMBLY
WARNING: To reduce the risk of
serious personal injury, turn unit off and
disconnect it from power source before making
any adjustments or removing/installing
attachments or accessories. An accidental start-up
can causeinjury.
Assembly Tools Required (Not Supplied)
Phillips Screwdriver
Attaching Guard and Bail Handle to
Trimmer
WARNING: Only use with handle and
guard properly assembled to hedge trimmer.
The use of the hedge trimmer without the proper
guard or handle provided may result in serious
personalinjury.
The trimmer is shipped with the guard and bail handle
attached to the trimmer with a plastic zip tie.
Attaching Guard to trimmer (FIG. B, C)
The trimmer is shipped with the guard unattached to the
trimmer. To attach the guard:
1. Remove guard retaining screw
10
with the Phillips
screwdriver (notsupplied).
2. Position the guard in place as shown in Fig.B. Ensuring
the guard slots into the grooves on theunit.
Fig. B
10
3. Insert the guard retaining screw
10
into the opening
on the side of the guard and tighten securely as shown
in Fig.C.
Fig. C
10
ENGLISH
5
Attaching the Bail Handle (FIG. D, E)
1. Cut the plastic ziptie.
2. Remove the 4 screws that are partially run into the
trimmer housing (Fig.D).
Fig. D
3. Slide the bail handle onto the front of the trimmer
housing behind theguard.
4. Insert the four screws into the openings on the side of
the bail handle and tighten securely as shown in Fig.E.
Fig. E
Attaching Extension Cord to Trimmer
(FIG. F)
WARNING: Ensure the trigger switch
is not engaged to reduce the risk of starting the
appliance accidentally.
A cord retainer is incorporated into the rear of the handle on
the power head.
1. Near the end of the extension cord, fold the extension
cord to create aloop.
2. Feed the loop into the cord retainer housing
10
as
shown in Fig.F.
3. Hook the loop onto the cord retainer
7
so it rests in the
cord retainer.
4. Plug the extension cord into the powerhead.
11
7
Fig. F
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
OPERATION
WARNING: To reduce the risk of
serious personal injury, turn unit off and
disconnect it from power source before making
any adjustments or removing/installing
attachments or accessories. An accidental start-up
can causeinjury.
Proper Hand Position (Fig. G)
WARNING: To reduce the risk of serious
personal injury, ALWAYS use proper hand position
as shown.
WARNING: To reduce the risk of serious
personal injury, ALWAYS hold securely in anticipation
of a suddenreaction.
Always hold the trimmer, as shown in the illustrations in
this manual, with one hand on the switch handle and one
hand on the bail handle (Fig. G). Never hold the unit by the
bladeguard.
Switch
To turn the tool “ON”, slide the lock off button
4
, shown in
Fig. G, backward and squeeze the trigger switch
5
. Once
the unit is running, you may release the lock off button.
In order to keep the unit running you must continue
to squeeze the trigger. To turn the tool “OFF”, release
thetrigger.
WARNING: Never attempt to lock a
switch in the ONposition.
Fig. G
4
5
Trimming Instructions
1. EXTENSION CORD – (Fig. H) – Always keep extension
cord behind trimmer and away from the trimming
operation. Never drape it over a hedge being trimmed.
If you cut or damage the cord, unplug it at the electrical
outlet immediately, before inspecting or repairingcord.
2. WORKING POSITION Maintain proper footing and
balance and do not overreach. Wear safety goggles,
non-skid footwear and rubber gloves when trimming.
Hold the tool firmly in both hands and turn the tool ON.
ENGLISH
6
Always hold the trimmer, as shown in Fig. G, with one
hand on the switch handle and one hand on the bail
handle. Never hold the tool by the bladeguard.
Fig. H
3. TRIMMING NEW GROWTH– (Fig. I) – A wide,
sweeping motion, feeding the blade teeth through the
twigs is most effective. A slight downward tilt of the
blade, in the direction of motion gives the bestcutting.
CAUTION: Do not use trimmers for cutting
stems greater than 3/4 in. (19mm). (Do not use
BEHT200 trimmer for cutting stems greater
than 5/8 in. (16mm)). Use the trimmer only for
cutting normal shrubbery found around houses
andbuildings.
Fig. I
4. LEVEL HEDGES (Fig. J) – To obtain exceptionally level
hedges, a piece of string can be stretched along the
length of the hedge as aguide.
Fig. J
5. SIDE-TRIMMING HEDGES (Fig. K) – Begin at the
bottom and sweepup.
Fig. K
6. sawBLADE™ (Fig.L) (BEHTS300, BEHTS400) For
branches too large for the blade
1
to cut, use the
sawBLADE™
8
. Position the sawBLADE™ as close
to the bottom of the branch as possible. Place the
sawBLADE™ shoe
9
against the branch. Turn the
hedge trimmer on as described above, allowing the tool
to work at its own pace until the branch is fullycut.
Fig. L
1
8
9
WARNING: TO GUARD AGAINST INJURY,
OBSERVE THE FOLLOWING:
READ INSTRUCTION MANUAL BEFORE USING,
SAVE INSTRUCTIONMANUAL.
CHECK THE HEDGE FOR FOREIGN OBJECTS SUCH
AS WIRE OR FENCES BEFORE EACHUSE.
KEEP HANDS ON HANDLES. DON’TOVERREACH.
DO NOT USE UNDER WETCONDITIONS.
DO NOT USE WITH DAMAGED EXTENSIONCORD.
DANGER: KEEP HANDS AWAY
FROMBLADES.
CAUTION: BLADE COASTS AFTER
TURNOFF.
MAINTENANCE
WARNING: Remove extension cord
from trimmer before servicing, cleaning or removing
material from the gardeningappliance.
The cutting blades are made from
Fig. M
high quality, hardened steel and
with normal usage, they will not
require resharpening. However, if
you accidentally hit a wire fence
(Fig. M), stones, glass or other hard
objects, you may put a nick in the
blade. There is no need to remove
this nick as long as it does not
interfere with the movement of the
blade. If it does interfere, unplug
the cord and use a fine toothed file or sharpening stone to
remove the nick. If you drop the trimmer, carefully inspect it
for damage. If the blade is bent, housing cracked, or handles
broken or if you see any other condition that may affect the
trimmer’s operation contact your local BLACK+DECKER
Service Center for repairs before putting it back intouse.
ENGLISH
7
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals. Do not store the
unit on or adjacent to fertilizers orchemicals.
Cleaning
WARNING: Blow dirt and dust out of all
air vents with clean, dry air at least once a week. To
minimize the risk of eye injury, always wear ANSI Z87.1
approved eye protection when performingthis.
WARNING: Never use solvents or other
harsh chemicals for cleaning the non-metallic parts
of the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into aliquid.
Repairs
WARNING: To assure product
SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection
and replacement) should be performed by
a BLACK+DECKER factory service center or a
BLACK+DECKER authorized service center. Always use
identical replacementparts.
Accessories
WARNING: DO NOT use the hedge
trimmer with any type of accessory or attachment.
Such usage might behazardous.
Register Online
Thank you for your purchase. Register your product nowfor:
WARRANTY SERVICE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with yourproduct.
CONFIRMATION OF OWNERSHIP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
ofpurchase.
FOR YOUR SAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
SafetyAct.
Register online at www.BlackandDecker.com/NewOwner.
TWO-YEAR LIMITED WARRANTY
Black & Decker (U.S.) Inc. warranties this product to be free
from defects in material or workmanship for a period of
two (2) years following the date of purchase, provided that
the product is used in a home environment. This limited
warranty does not cover failures due to abuse, accidental
damage or when repairs have been made or attempted
by anyone other than BLACK+DECKER and its Authorized
Service Centers. A defective product meeting the warranty
conditions set forth herein will be replaced or repaired at no
charge in either of two ways:
The first, which will result in exchanges only, is to return
the product to the retailer from whom it was purchased
(provided that the store is a participating retailer). Returns
should be made within the time period of the retailer’s
policy for exchanges. Proof of purchase may be required.
Please check with the retailer for its specific return policy
regarding time limits for returns or exchanges. The
second option is to take or send the product (prepaid) to
a BLACK+DECKER owned or authorized Service Center
for repair or replacement at BLACK+DECKER’s option.
Proof of purchase may be required. BLACK+DECKER
owned and authorized service centers are listed online
at www.blackanddecker.com. This warranty does not
apply to accessories. This warranty gives you specific
legal rights aand you may have other rights which vary
from state to state or province to province. Should
you have any questions, contact the manager of your
nearest BLACK+DECKER Service Center. This product is
not intended for commercial use, and accordingly, such
commercial use of this product will void this warranty.
All other guarantees, express or implied, are hereby
disclaimed. LATIN AMERICA: This warranty does not
apply to products sold in Latin America. For products
sold in Latin America, check country specific warranty
information contained in the packaging, call the local
company or see the website for such information.
Imported by Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286
BlackandDecker.com
1-800-544-6986
ENGLISH
8
TROUBLESHOOTING
Problem Possible Cause Possible Solution
Slow running, noisy or hot
blades.
Dry, corrodedblades. Lubricateblades.
Blades or blade supportbent. Straighten blade or bladesupport.
Bent or damaged teeth. Straightenteeth.
Loose bladebolts. Tighten bladebolts.
Unit will notstart. Lock off not fully operated. Check that lock off is fully forward prior to
moving maintrigger.
Cord not plugged in. Plug cord into a workingoutlet.
Circuit fuse is blown. Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to blow,
discontinue use immediately and have it
serviced at a BLACK+DECKER service center
or authorized servicer.)
Circuit breaker is tripped. Reset circuit breaker. (If the product
repeatedly causes the circuit breaker to trip,
discontinue use immediately and have it
serviced at a BLACK+DECKER service center
or authorized servicer.)
Cord or switch isdamaged. Have cord or switch replaced at
BLACK+DECKER Service Center or
AuthorizedServicer.
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest
you or call the BLACK+DECKER help line at 1-800-544-6986.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

BLACK + DECKER BEHT200 User manual

Category
Power hedge trimmers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI