BLACK + DECKER BEHT200 User manual

Please read before returning this product for any reason.

àLIRE avant de retourner ce produit pour quelque raison que ce soit.

LEA EL MANUAL antes de devolver este producto por cualquier motivo.

INSTRUCTION MANUAL

MODE D’EMPLOI

MANUAL DE INSTRUCCIONES

final page size: 8.5 x 5.5 in

HEDGE TRIMMER

TAILLE-HAIE

PODADORA DE SETOS

BEHT200

BEHTS300

BEHT350

BEHTS400

ENGLISH

English (original instructions) 1

Français (traduction de la notice d’instructions originale) 9

Español (traducido de las instrucciones originales) 18

To register your new product, visit

www.BlackandDecker.com/NewOwner

Consulter le site Web www.BlackandDecker.com/NewOwner

pour enregistrer votre nouveauproduit.

Visite www.BlackandDecker.com/NewOwner para registrar su

nuevoproducto.

Thank you for choosing BLACK+DECKER!

If you have a question or experience a problem with your

BLACK+DECKER purchase, go to: http://www.blackanddecker.com/

instantanswers

If you can’t find the answer or do not have access to the Internet,

call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. – Fri. to speak with

an agent. Please have the CATALOG NUMBER available when youcall.

KEY INFORMATION YOU SHOULD KNOW

• To insure extension cord does not come loose see Fig. E for properattachment.

• In order to operate the trimmer, the lock button must first be pulled back (see Fig. F) then squeezetrigger.

RENSEIGNEMENTS IMPORTANTS

• Afin de s’assurer que la rallonge ne se débranche pas, la raccorder conformément aux Fig.E.

• Pour faire fonctionner l’outil, on doit tirer sur le bouton de verrouillage (Fig. F), puis enfoncer l’actionneur

vers le haut.

INFORMACION CLAVE QUE DEBE SABER

• Para asegurarse de que el cable de extensión no se vaya a soltar, ver Figura E para su acopleapropiado.

• Para operar el cortacerco, primero tire del botón de seguridad hacia atrás (ver Figura F) y luego apriete el

accionador

ENGLISH

1

English (original instructions)

1

Blade

2

Guard

3

Bail Handle

4

Lock Off Button

5

Trigger Switch

6

Switch Handle

7

Cord Retainer

8

sawBLADE™ (BEHTS300, BEHTS400)

9

sawBLADE™ shoe (BEHTS300, BEHTS400)

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk

of personal injury or propertydamage.



DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or

seriousinjury.



WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or

seriousinjury.



CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderateinjury.



(Used without word) Indicates a safety relatedmessage.

NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in

propertydamage.



WARNING! Read all safety warnings

and all instructions. Failure to follow the warnings

and instructions may result in electric shock, fire and/

or seriousinjury.

WARNING: To reduce the risk of injury,

read the instructionmanual.

Fig. A

9

8

1

3

2

4

5

7

6

9

8

BEHTS300 / BEHTS400

ENGLISH

2

GENERAL POWER TOOL SAFETY WARNINGS



WARNING! Read all safety warnings

and all instructions. Failure to follow the warnings

and instructions may result in electric shock, fire and/

or seriousinjury.

SAVE ALL WARNINGS AND

INSTRUCTIONS FOR FUTURE

REFERENCE

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

powertool.

1) Work Area Safety

a ) Keep work area clean and well lit. Cluttered or dark

areas inviteaccidents.

b ) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust orfumes.

c ) Keep children and bystanders away while

operating a power tool. Distractions can cause you

to losecontrol.

2) Electrical Safety

a ) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electricshock.

b ) Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed orgrounded.

c ) Do not expose power tools to rain or wet

conditions. Water entering a power tool will increase

the risk of electricshock.

d ) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electricshock.

e ) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electricshock.

f ) If operating a power tool in a damp location

is unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of a GFCI

reduces the risk of electricshock.

3) Personal Safety

a ) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personalinjury.

b ) Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personalinjuries.

c ) Prevent unintentional starting. Ensure the

switch is in the off position before connecting to

power source and/or battery pack, picking up or

carrying the tool. Carrying power tools with your

finger on the switch or energizing power tools that

have the switch on invitesaccidents.

d ) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personalinjury.

e ) Do not overreach. Keep proper footing and

balance at all times. This enables better control of

the power tool in unexpectedsituations.

f ) Dress properly. Do not wear loose clothing or

jewelry. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewelry or

long hair can be caught in movingparts.

g ) If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust

collection can reduce dust-relatedhazards.

4) Power Tool Use and Care

a ) Do not force the power tool. Use the correct

power tool for your application. The correct power

tool will do the job better and safer at the rate for

which it wasdesigned.

b ) Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must

berepaired.

c ) Disconnect the plug from the power source and/

or the battery pack from the power tool before

making any adjustments, changing accessories,

or storing power tools. Such preventive safety

measures reduce the risk of starting the power

toolaccidentally.

d ) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrainedusers.

e ) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are

caused by poorly maintained powertools.

f ) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier tocontrol.

g ) Use the power tool, accessories and tool bits, etc.

in accordance with these instructions, taking

ENGLISH

3

into account the working conditions and the

work to be performed. Use of the power tool for

operations different from those intended could result

in a hazardoussituation.

5) Service

a ) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool ismaintained.

Hedge Trimmer Safety Warnings



DANGER: Keep hands away from

blade. Contact with blade will result in serious

personalinjury.

• Use both hands when operating the hedge trimmer.

Using one hand could cause loss of control and

result in serious personalinjury.

• Keep all parts of the body away from the cutter

blade. Do not remove cut material or hold material

to be cut when blades are moving. Make sure

the switch is off when clearing jammed material.

Blades coast after turn off. A moment of inattention

while operating the hedge trimmer may result in serious

personalinjury.

• Carry the hedge trimmer by the handle with the

cutter blade stopped. Proper handling of the hedge

trimmer will reduce possible personal injury from

the cutter blades.

• Hold the power tool by insulated gripping surfaces

only, because the cutter blade may contact hidden

wiring. Cutter blades contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

• Keep extension cord away from cutting area. During

operation the extension cord may be hidden in

shrubs and can be accidentally cut by the blade.

• Check the hedge for foreign objects, e.g. wirefences.



WARNING: Do not expose torain.



WARNING: Only use with bail handle

and guard properly assembled to hedge trimmer. The

use of the hedge trimmer without the proper guard or

handle provided may result in serious personalinjury.



WARNING: Remove plug from the outlet

immediately if the extension cord becomes damaged

orcut.



WARNING: Some dust created by

this product contains chemicals known to the

State of California to cause cancer, birth defects or

other reproductive harm. Some examples of these

chemicalsare:

• compounds in fertilizers

• compounds in insecticides, herbicides and

pesticides

• arsenic and chromium from chemically treated

lumber

To reduce your exposure to these chemicals, wear approved

safety equipment such as dust masks that are specially

designed to filter out microscopicparticles.

• If using an extension cord outdoors, it is absolutely

necessary to use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use

reduces the risk of electricshock.

• To reduce the risk of disconnection of appliance cord from

the extension cord during operating:

i) Make a knot as shown in below; or

ii) Use one of the plug-receptacle retaining straps or

connectors described in thismanual.

OR

iii) Secure the extension cord to the appliance plug as

shown or described in the OperatingInstructions.



WARNING: To reduce the risk of personal

injury due to a loose electrical connection between

the appliance’s plug and extension cord, firmly and

fully attach the appliance plug to the extension cord.

Periodically check the connection while operating to

ensure it is fully attached. Do not use an extension

cord that provides a loose connection. A loose

connection may result in overheating, fire, and

increases the risk of aburning.

• An extension cord must have adequate wire size

(AWG or American Wire Gauge) for safety. The smaller

the gauge number of the wire, the greater the capacity

of the cable, that is, 16 gauge has more capacity than 18

gauge. An undersized cord will cause a drop in line voltage

resulting in loss of power and overheating. When using

more than one extension to make up the total length,

be sure each individual extension contains at least the

minimum wire size. The following table shows the correct

size to use depending on cord length and nameplate

ampere rating. If in doubt, use the next heavier gauge. The

lower the gauge number, the heavier thecord.

ENGLISH

4

Minimum Gauge for Cord Sets

Volts

Total Length of Cord in Feet

(meters)

120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7)

240 V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)

Ampere Rating

American Wire Gauge

More

Than

Not

More

Than

0 6 18 16 16 14

6 10 18 16 14 12

10 12 16 16 14 12

12 16 14 12 Not Recommended

The label on your tool may include the following symbols. The

symbols and their definitions are asfollows:

V ......................... volts

Hz .......................hertz

min ..................... minutes

or DC ......direct current

...................... Class I Construction

(grounded)

…/min ..............per minute

BPM .................... beats per minute

IPM ..................... impacts per minute

RPM .................... revolutions per

minute

sfpm ................... surface feet per

minute

SPM .................... strokes per minute

A ......................... amperes

W ........................watts

or AC ...........alternating current

or AC/DC .... alternating or

direct current

...................... Class II

Construction

(double insulated)

n

o

.......................no load speed

n .........................rated speed

......................earthing terminal

.....................safety alert symbol

.....................visible radiation

..................... wear respiratory

protection

..................... wear eye

protection

..................... wear hearing

protection

..................... read all

documentation

CSPM .................. cut strokes per

minute

SAVE THESE INSTRUCTIONS FOR

FUTURE USE

COMPONENTS (FIG. A)



WARNING: Never modify the power

tool or any part of it. Damage or personal injury

couldresult.

Refer to Figure A at the beginning of this manual for a

complete list ofcomponents.

Intended Use

This hedge trimmer is designed for residential

trimmingapplications.

DO NOT use under wet conditions or in presence of

flammable liquids orgases.

This hedge trimmer is a residential power tool. DO NOT

let children come into contact with the tool. Supervision is

required when inexperienced operators use thistool.

ASSEMBLY



WARNING: To reduce the risk of

serious personal injury, turn unit off and

disconnect it from power source before making

any adjustments or removing/installing

attachments or accessories. An accidental start-up

can causeinjury.

Assembly Tools Required (Not Supplied)

• Phillips Screwdriver

Attaching Guard and Bail Handle to

Trimmer



WARNING: Only use with handle and

guard properly assembled to hedge trimmer.

The use of the hedge trimmer without the proper

guard or handle provided may result in serious

personalinjury.

The trimmer is shipped with the guard and bail handle

attached to the trimmer with a plastic zip tie.

Attaching Guard to trimmer (FIG. B, C)

The trimmer is shipped with the guard unattached to the

trimmer. To attach the guard:

1. Remove guard retaining screw

10

with the Phillips

screwdriver (notsupplied).

2. Position the guard in place as shown in Fig.B. Ensuring

the guard slots into the grooves on theunit.

Fig. B

10

3. Insert the guard retaining screw

10

into the opening

on the side of the guard and tighten securely as shown

in Fig.C.

Fig. C

10

ENGLISH

5

Attaching the Bail Handle (FIG. D, E)

1. Cut the plastic ziptie.

2. Remove the 4 screws that are partially run into the

trimmer housing (Fig.D).

Fig. D

3. Slide the bail handle onto the front of the trimmer

housing behind theguard.

4. Insert the four screws into the openings on the side of

the bail handle and tighten securely as shown in Fig.E.

Fig. E

Attaching Extension Cord to Trimmer

(FIG. F)



WARNING: Ensure the trigger switch

is not engaged to reduce the risk of starting the

appliance accidentally.

A cord retainer is incorporated into the rear of the handle on

the power head.

1. Near the end of the extension cord, fold the extension

cord to create aloop.

2. Feed the loop into the cord retainer housing

10

as

shown in Fig.F.

3. Hook the loop onto the cord retainer

7

so it rests in the

cord retainer.

4. Plug the extension cord into the powerhead.

11

7

Fig. F

SAVE THESE INSTRUCTIONS FOR

FUTURE USE

OPERATION



WARNING: To reduce the risk of

serious personal injury, turn unit off and

disconnect it from power source before making

any adjustments or removing/installing

attachments or accessories. An accidental start-up

can causeinjury.

Proper Hand Position (Fig. G)



WARNING: To reduce the risk of serious

personal injury, ALWAYS use proper hand position

as shown.



WARNING: To reduce the risk of serious

personal injury, ALWAYS hold securely in anticipation

of a suddenreaction.

Always hold the trimmer, as shown in the illustrations in

this manual, with one hand on the switch handle and one

hand on the bail handle (Fig. G). Never hold the unit by the

bladeguard.

Switch

To turn the tool “ON”, slide the lock off button

4

, shown in

Fig. G, backward and squeeze the trigger switch

5

. Once

the unit is running, you may release the lock off button.

In order to keep the unit running you must continue

to squeeze the trigger. To turn the tool “OFF”, release

thetrigger.



WARNING: Never attempt to lock a

switch in the ONposition.

Fig. G

4

5

Trimming Instructions

1. EXTENSION CORD – (Fig. H) – Always keep extension

cord behind trimmer and away from the trimming

operation. Never drape it over a hedge being trimmed.

If you cut or damage the cord, unplug it at the electrical

outlet immediately, before inspecting or repairingcord.

2. WORKING POSITION – Maintain proper footing and

balance and do not overreach. Wear safety goggles,

non-skid footwear and rubber gloves when trimming.

Hold the tool firmly in both hands and turn the tool ON.

ENGLISH

6

Always hold the trimmer, as shown in Fig. G, with one

hand on the switch handle and one hand on the bail

handle. Never hold the tool by the bladeguard.

Fig. H

3. TRIMMING NEW GROWTH– (Fig. I) – A wide,

sweeping motion, feeding the blade teeth through the

twigs is most effective. A slight downward tilt of the

blade, in the direction of motion gives the bestcutting.



CAUTION: Do not use trimmers for cutting

stems greater than 3/4 in. (19mm). (Do not use

BEHT200 trimmer for cutting stems greater

than 5/8 in. (16mm)). Use the trimmer only for

cutting normal shrubbery found around houses

andbuildings.

Fig. I

4. LEVEL HEDGES (Fig. J) – To obtain exceptionally level

hedges, a piece of string can be stretched along the

length of the hedge as aguide.

Fig. J

5. SIDE-TRIMMING HEDGES (Fig. K) – Begin at the

bottom and sweepup.

Fig. K

6. sawBLADE™ (Fig.L) (BEHTS300, BEHTS400) – For

branches too large for the blade

1

to cut, use the

sawBLADE™

8

. Position the sawBLADE™ as close

to the bottom of the branch as possible. Place the

sawBLADE™ shoe

9

against the branch. Turn the

hedge trimmer on as described above, allowing the tool

to work at its own pace until the branch is fullycut.

Fig. L

1

8

9



WARNING: TO GUARD AGAINST INJURY,

OBSERVE THE FOLLOWING:

• READ INSTRUCTION MANUAL BEFORE USING,

SAVE INSTRUCTIONMANUAL.

• CHECK THE HEDGE FOR FOREIGN OBJECTS SUCH

AS WIRE OR FENCES BEFORE EACHUSE.

• KEEP HANDS ON HANDLES. DON’TOVERREACH.

• DO NOT USE UNDER WETCONDITIONS.

• DO NOT USE WITH DAMAGED EXTENSIONCORD.



DANGER: KEEP HANDS AWAY

FROMBLADES.



CAUTION: BLADE COASTS AFTER

TURNOFF.

MAINTENANCE



WARNING: Remove extension cord

from trimmer before servicing, cleaning or removing

material from the gardeningappliance.

The cutting blades are made from

Fig. M

high quality, hardened steel and

with normal usage, they will not

require resharpening. However, if

you accidentally hit a wire fence

(Fig. M), stones, glass or other hard

objects, you may put a nick in the

blade. There is no need to remove

this nick as long as it does not

interfere with the movement of the

blade. If it does interfere, unplug

the cord and use a fine toothed file or sharpening stone to

remove the nick. If you drop the trimmer, carefully inspect it

for damage. If the blade is bent, housing cracked, or handles

broken or if you see any other condition that may affect the

trimmer’s operation contact your local BLACK+DECKER

Service Center for repairs before putting it back intouse.

ENGLISH

7

Fertilizers and other garden chemicals contain agents which

greatly accelerate the corrosion of metals. Do not store the

unit on or adjacent to fertilizers orchemicals.

Cleaning



WARNING: Blow dirt and dust out of all

air vents with clean, dry air at least once a week. To

minimize the risk of eye injury, always wear ANSI Z87.1

approved eye protection when performingthis.



WARNING: Never use solvents or other

harsh chemicals for cleaning the non-metallic parts

of the tool. These chemicals may weaken the plastic

materials used in these parts. Use a cloth dampened

only with water and mild soap. Never let any liquid

get inside the tool; never immerse any part of the tool

into aliquid.

Repairs



WARNING: To assure product

SAFETY and RELIABILITY, repairs, maintenance

and adjustment (including brush inspection

and replacement) should be performed by

a BLACK+DECKER factory service center or a

BLACK+DECKER authorized service center. Always use

identical replacementparts.

Accessories



WARNING: DO NOT use the hedge

trimmer with any type of accessory or attachment.

Such usage might behazardous.

Register Online

Thank you for your purchase. Register your product nowfor:

• WARRANTY SERVICE: Registering your product will

help you obtain more efficient warranty service in case

there is a problem with yourproduct.

• CONFIRMATION OF OWNERSHIP: In case of

an insurance loss, such as fire, flood or theft, your

registration of ownership will serve as your proof

ofpurchase.

• FOR YOUR SAFETY: Registering your product will

allow us to contact you in the unlikely event a safety

notification is required under the Federal Consumer

SafetyAct.

Register online at www.BlackandDecker.com/NewOwner.

TWO-YEAR LIMITED WARRANTY

Black & Decker (U.S.) Inc. warranties this product to be free

from defects in material or workmanship for a period of

two (2) years following the date of purchase, provided that

the product is used in a home environment. This limited

warranty does not cover failures due to abuse, accidental

damage or when repairs have been made or attempted

by anyone other than BLACK+DECKER and its Authorized

Service Centers. A defective product meeting the warranty

conditions set forth herein will be replaced or repaired at no

charge in either of two ways:

The first, which will result in exchanges only, is to return

the product to the retailer from whom it was purchased

(provided that the store is a participating retailer). Returns

should be made within the time period of the retailer’s

policy for exchanges. Proof of purchase may be required.

Please check with the retailer for its specific return policy

regarding time limits for returns or exchanges. The

second option is to take or send the product (prepaid) to

a BLACK+DECKER owned or authorized Service Center

for repair or replacement at BLACK+DECKER’s option.

Proof of purchase may be required. BLACK+DECKER

owned and authorized service centers are listed online

at www.blackanddecker.com. This warranty does not

apply to accessories. This warranty gives you specific

legal rights aand you may have other rights which vary

from state to state or province to province. Should

you have any questions, contact the manager of your

nearest BLACK+DECKER Service Center. This product is

not intended for commercial use, and accordingly, such

commercial use of this product will void this warranty.

All other guarantees, express or implied, are hereby

disclaimed. LATIN AMERICA: This warranty does not

apply to products sold in Latin America. For products

sold in Latin America, check country specific warranty

information contained in the packaging, call the local

company or see the website for such information.

Imported by Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286

BlackandDecker.com

1-800-544-6986

ENGLISH

8

TROUBLESHOOTING

Problem Possible Cause Possible Solution

Slow running, noisy or hot

blades.

• Dry, corrodedblades. • Lubricateblades.

• Blades or blade supportbent. • Straighten blade or bladesupport.

• Bent or damaged teeth. • Straightenteeth.

• Loose bladebolts. • Tighten bladebolts.

Unit will notstart. • Lock off not fully operated. • Check that lock off is fully forward prior to

moving maintrigger.

• Cord not plugged in. • Plug cord into a workingoutlet.

• Circuit fuse is blown. • Replace circuit fuse. (If the product

repeatedly causes the circuit fuse to blow,

discontinue use immediately and have it

serviced at a BLACK+DECKER service center

or authorized servicer.)

• Circuit breaker is tripped. • Reset circuit breaker. (If the product

repeatedly causes the circuit breaker to trip,

discontinue use immediately and have it

serviced at a BLACK+DECKER service center

or authorized servicer.)

• Cord or switch isdamaged. • Have cord or switch replaced at

BLACK+DECKER Service Center or

AuthorizedServicer.

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest

you or call the BLACK+DECKER help line at 1-800-544-6986.

Page is loading ...

BLACK + DECKER BEHT200 User manual

BLACK + DECKER BEHT200 User manual

in other languages

Other documents