Aeg-Electrolux HC452600EB User manual

HC452600EB

NL

TEPPAN YAKI-GRILLPLAAT GEBRUIKSAANWIJZING

2

EN

TEPPAN YAKI GRILL PLATE USER MANUAL

21

FR

GRILL TEPPAN YAKI NOTICE D'UTILISATION

39

DE

TEPPAN YAKI GRILLPLATTE BENUTZERINFORMATION

58

Page is loading ...

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have

created it to give you impeccable performance for many

years, with innovative technologies that help make life

simpler – features you might not find on ordinary

appliances. Please spend a few minutes reading to get the

very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to

keep all your AEG appliances looking spotless and

working perfectly. Along with a wide range of accessories

designed and built to the high quality standards you

would expect, from specialist cookware to cutlery baskets,

from bottle holders to delicate laundry bags…

Visit the webshop at:

www.aeg.com/shop

21

CONTENTS

23 Safety information

24 Installation instructions

29 Product description

31 Operating instructions

34 Helpful hints and tips

36 Care and cleaning

37 What to do if…

38 Environment concerns

The following symbols are used in this user

manual:

Important information concerning your

personal safety and information on how to

avoid damaging the appliance.

General information and tips

Environmental information

Subject to change without notice

22 Contents

SAFETY INFORMATION

For your safety and correct operation of the appliance, read this manual carefully before

installation and use. Always keep these instructions with the appliance even if you move or

sell it. Users must fully know the operation and safety features of the appliance.

General safety

WARNING!

Persons (including children) with reduced physical sensory, mental capabilities or lack of ex-

perience and knowledge must not use the appliance. They must have supervision or instruc-

tion for the operation of the appliance by a person responsible for their safety.

Child safety

• Only adults can use this appliance. Children must get supervision to make sure that they

do not play with the appliance.

• Keep all packaging away from children. There is a risk of suffocation.

• Keep children away from the appliance when it is on.

WARNING!

Start the child safety device to prevent small children and pets from an accidental activa-

tion of the appliance.

Safety during operation

• Remove all packaging, stickers and layers from the appliance before the first use.

• Set the cooking zones to "off" after each use.

• Risk of burns! Do not put metallic objects, for example cutlery or saucepan lids, on the

cooking surface, as they can become hot.

• Users with an implanted pacemaker must keep their upper body minimum 30 cm from

induction cooking zones that are switched on.

WARNING!

Fire danger! Overheated fats and oils can catch fire very quickly.

Correct operation

• Always monitor the appliance during operation.

• Only use the appliance for domestic cooking tasks!

• Do not use the appliance as a work or a storage surface.

• Do not put or keep very flammable liquids and materials, or fusible objects (made of

plastic or aluminium) on or near the appliance.

• Be careful when you connect the appliance to the near sockets. Do not let electricity

bonds touch the appliance or hot cookware. Do not let electricity bonds tangle.

How to prevent a damage to the appliance

• If the objects or cookware fall on the glass ceramic, the surface can be damaged.

Safety information

23

• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the

glass ceramic if you move them on the surface.

• Do not let cookware boil dry to prevent the damage to cookware and glass ceramics.

• Do not use the cooking zones with empty cookware or without cookware.

• Do not cover the parts of the appliance with aluminium foil.

• Do not cover the ventilation space of 5 mm between the worktop and front of the unit

below it.

WARNING!

If there is a crack on the surface, disconnect power supply to prevent the electric shock.

Special notes for the Teppan Yaki

• You can hear noises when the appliance operates. The noises are normal and do not refer

to appliance malfunction.

• If you use the appliance frequently, a small unevenness can form in the middle of the

cooking surface where the 2 zones touch. This is not a defect in the cooking surface and

its operation is not affected. Therefore:

– Do not put cookware in the middle of the cooking surface between the zones, as the

unevenness can make them unsteady.

– Frying on the surface, where the zones touch, can cause in uneven browning (e. g.

with pancakes).

INSTALLATION INSTRUCTIONS

Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The

rating plate of the appliance is on its lower casing.

PNC: 941 560 807/01

220-240V ~50/60Hz

2,8 kW/Leistung ind. 2,8 kW

Typ: 55TEP00AU

Serie:

HC452600EB

Made in Switzerland

24 Installation instructions

Safety instructions

WARNING!

You must read these!

Make sure that the appliance is not damaged because of transportation. Do not connect a

damaged appliance. If it is necessary, speak to the supplier.

Only an authorised service technician can install, connect or repair this appliance. Use only

original spare parts.

Only use built-in appliances after you assemble the appliance into correct built-in units and

work surfaces that align to the standards.

Do not change the specifications or modify this product. Risk of injury and damage to the

appliance.

Fully obey the laws, ordinances, directives and standards in force in the country where you

use the appliance (safety regulations, recycling regulations, electrical safety rules etc.)!

Keep the minimum distances to other appliances and units!

Install anti-shock protection, for example install the drawers only with a protective floor

directly below the appliance!

Protect the cut surfaces of the worktop against moisture with a correct sealant!

Seal the appliance to the work top with no space left with a correct sealant!

Protect the bottom of the appliance from steam and moisture, e.g. from a dishwasher or

oven!

Do not install the appliance adjacent to doors and below windows! If not, hot cookware can

be hit off the hob when you open doors or windows.

WARNING!

Risk of injury from electrical current. Carefully obey the instructions for electrical connec-

tions.

• The electrical mains terminal is live.

• Make electrical mains terminal free of voltage.

• Install correctly to give anti-shock protection.

• Loose and incorrect plug and socket connections can make the terminal become too hot.

• A qualified electrician must install the clamping connections correctly.

• Use a strain relief clamp on cable.

• Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single-phase.

• Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or

higher). Speak your local Service Force Centre.

The appliance must have the electrical installation which lets you disconnect the appliance

from the mains at all poles with a contact opening width of minimum 3 mm.

You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips and contactors.

If, you use the accessory frame C-FRAME, first read the instruction supplied with the frame

before you install the appliance.

Installation instructions

25

Assembly

min.

50mm

min.

50mm

min.

500mm

min.

5mm

=

340

+1

mm

600mm

490

+1

mm

R 5mm

min.

25 mm

min.

5 mm

min.

20 mm

26 Installation instructions

min.

5 mm

min.

38 mm

• Seal the gap between the worktop and glass ceramic with silicone.

• Put some soapy water on the silicone.

• Pull off the excess silicone with the scraper.

The installation of more than one appliance

Added parts:connection bar(s), heat resistant silicon, rubber shape, sealing strap.

Only use special a heat - resistant silicon.

The worktop cut out

Distance from the wall : minimum 50 mm

Depth : 490 mm

Width : sum widths of all the appliances to be built-in and subtract 20 mm (see also "Over-

view of all appliance widths" )

Example :

580 mm

520 mm

490 mm

360 mm

+-=

20 mm 920 mm

The installation of more than one appliance

1. Put down the dimension of the worktop cut out and saw it out.

2. Put the appliances one at time on some soft surface, a blanket for example, with the

bottom side up.

3. Put the seal stripe around the lower edge of the appliance along the outer edge of the

glass ceramic.

4. Loosely screw the fixing plates into the appropriate holes in the protective casing.

5. Put the first appliance in the worktop cut out. Put the connection bar in the worktop

cut out and push up half of the width against the appliance.

Installation instructions

27

6. Loosely turn in fixing plates from below on the worktop and on the connection bar.

7. Put the subsequent appliance in the worktop cut out . Make sure that the front ends

of the appliances are on the same level.

8. Tighten the fixing plate / retaining grip screws.

9. Seal the gap between the worktop and appliances and between appliances with sili-

cone.

10. Put some soapy water on the silicon.

11. Press the rubber shape with some strength against the glass ceramic and move it

slowly along the space.

12. Do not touch the silicon until it become hard, it can last about a day.

13. Carefully remove silicon that came out with a shaving blade.

14. Clean glass ceramic fully.

28 Installation instructions

PRODUCT DESCRIPTION

The most important features of your appliance

• The cooking surface has 2 layers of stainless steel with a layer of aluminium between

them. It has a good thermal capacity, which prevents a quickly decrease in temperature,

for example, when you prepare meat from the refrigerator.

• Each Teppan Yaki grill surface is unique. Due to their processing, they are handled man-

ually and ground by grinding specialists. Deviations in the grinding pattern are normal

and will not result in any functional limits. The frequent use of the grill makes it look

more valuable.

• The groove around the edge:

– decreases the temperature on the installation surfaces, that the cooking surface can

be installed into different types of kitchen worktops.

– The indentation of the groove absorbs some of the expansion of the heated cooking

surface.

– Minor food remnants and liquids can easily be fed into the groove and removed.

• The desired temperature can be kept constant by the thermostat with a readable temper-

ature setting. This prevents overheating of the food and permits low-fat cooking with

retention of nutritional values.

• The food is prepared (heated) directly on the cooking surface, with or without fat. There

is also the option of cooking with pots or pans.

• The heating time, e.g. to 180 °C, is approx. 4 minutes. The cooling down time, e.g. from

180 °C to 100 °C, is approx. 25 minutes, or to 60 °C approx. 60 minutes.

• The cooking surface must always be preheated.

General overview

1

3

2

4

1 Rear grilling zone 1400W

2 Front grilling zone 1400W

3 Glass bar

4 Control panel

Product description

29

Control panel layout

6 75 843

91012 11

2

1

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which

functions operate.

sensor field function

1

It activates and deactivates the appliance.

2

It locks/unlocks the control panel.

3

It activates and deactivates the cleaning function.

4

Temperature display It shows the temperature.

5

Cooking zones' indicators of timer It shows for which of the roasting zones you set

the time

6

Timer display It shows the time in minutes.

7

It shows that the Count Up operates (1 to 59 mi-

nutes).

8

It shows that the Count Down Timer operates (1

to 99 minutes) or shows that Minute Minder oper-

ates.

9

/

It increases or decreases the time.

10

It sets the roasting zone. .

11

It sets the Timer functions.

12

Control bar To set the heat temperature.

Displays

Display Description

The roasting zone is deactivated.

60

-

220

The roasting zone operates.

+ digit

There is a malfunction.

/ /

3 step Residual heat indicator: continue cook / stay warm / residual

heat.

Lock / The Child Safety functions operates.

30 Product description

Display Description

The Automatic Switch Off function operates.

OptiHeat Control (3 step Residual heat indicator)

WARNING!

\ \ Risk of burns from residual heat!

OptiHeat Control indicates the level of the residual heat. The induction cooking zones make

the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is

heated by the heat of the cookware.

OPERATING INSTRUCTIONS

On and Off

Touch for 1 second to start or stop the appliance.

Automatic Switch Off

The function deactivates the appliance automatically if:

• All roasting zones are deactivated

.

• You do not set the temperature after you activate the appliance.

• You spill something or put something on the control panel for more than 10 seconds, (a

pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove

the object or clean the control panel.

• You do not deactivate a roasting zone or change the temperature. After 90 minutes

comes on and the appliance deactivates. Before next use, set the roasting zone to .

The heat setting

Touch the control bar at the heat setting. Change

to the left or the right, if it is necessary. Do not

release before you have a correct heat setting. The

display shows the heat setting.

If you set the temperature, the display flashes until the roasting zone reaches the tempera-

ture. Then a signal sounds and the display shows the temperature.

The Timer

The Count Down Timer.

Use the Count Down Timer to set how long the cooking zone operates for only this one

time.

Set the Count Down Timer after the selection of the cooking zone.

Operating instructions 31

The selection of Timer function is possible for cooking zones that are active and the heat

setting is set.

• To set the cooking zone: touch

again and again until the indicator of a necessary

cooking zone comes on.

When this function is activated,

comes on.

• To activate the Count Down Timer: touch

of the timer to set the time (

00

-

99

minutes). When the indicator of the cooking zone starts to flash slow, the time counts

down.

• To see the remaining time: set the cooking zone with

. The indicator of the cooking

zone starts to flash quickly. The display shows the remaining time.

• To change the Count Down Timer:set the cooking zone with

touch or .

• To deactivate the Count Down Time: set the cooking zone with

. Touch . The

remaining time counts back to

00

. The indicator of the cooking zone goes out.

When the timer countdown comes to an end, the sound operates and

00

flashes. The

cooking zone deactivates.

• To deactivate the sound: touch

The Count up timer

Use the Count up timer to monitor how long the cooking zone operates.

• The selection of the cooking zone (if more than 1 cooking zone operates) : touch

again and again until the indicator of a necessary cooking zone comes on.

When this function is activated,

comes on.

• To activate the Count up timer:

Touch

The symbol goes out and comes on.

• To see how long the cooking zone operates:set the cooking zone with

. The indica-

tor of the cooking zone starts to flash quickly. The display shows the time that the zone

operates. The display shows the time of the cooking zone that operates for longer period

of time.

• To deactivate the Count up timer: set the cooking zone with

and touch or to

deactivate the timer. the symbol

goes out and comes on.

When the two Timer functions operate at the same time, the display shows the Count Up

Timer first.

The Minute minder.

You can use the timer as a minute minder while the cooking zones do not operate. Touch

.

Touch

or of the timer to set the time. When the time comes to an end, the sound

operates and

00

flashes.

• To stop the sound: touch

32 Operating instructions

Lock

You can lock the control panel, but not . It prevents an accidental change of the heat

setting.

First set the heat setting.

To start this function touch

. The symbol comes on for 4 seconds.

The Timer stays on.

To stop this function touch

. The heat setting that you set before comes on.

When you stop the appliance, you also stop this function.

The child safety device

This function prevents an accidental operation of the hob.

Starting the child safety device

• Start the hob with

. Do not set the heat settings.

• Touch

for 4 seconds. The symbol comes on.

• Stop the hob with

.

Switching off the child safety device

• Start the hob with

. Do not set the heat settings. Touch for 4 seconds. The symbol

comes on.

• Stop the hob with

.

Overriding the child safety device for one cooking session

• Start the hob with

. The symbol comes on.

• Touch

for 4 seconds. Set the heat setting in less than 10 seconds. You can operate

the hob.

• When you stop the hob with

, the child safety device operates again.

OffSound Control (Deactivation and activation of the sounds)

Deactivation of the sounds

Deactivate the appliance.

Touch

for 3 seconds. The displays come on and go out. Touch for 3 seconds.

comes on, the sound is on. Touch , comes on, the sound is off.

When this function operates, you can hear the sounds only when:

• you touch

• the Minute Minder comes down

• the Count Down Timer comes down

• you put something on the control panel.

Activation of the sounds

Deactivate the appliance.

Touch

for 3 seconds. The displays come on and go out. Touch for 3 seconds.

comes on, because the sound is off. Touch , comes on. The sound is on.

Operating instructions

33

HELPFUL HINTS AND TIPS

Preparing food with the Teppan Yaki

You prepare the food directly on the roasting surface, with or without fat. You can also use

pots or pans, but the warm up time is longer then on the glass-ceramic hob or on the gas

gob.

You can cook or keep warm accompaniments, e.g. sauces, rice, etc., in pots or pans. Put

them directly on the cooking surface.

We do not recommend boiling large quantities on the roasting surface, such as, e.g. for spa-

ghetti.

The noises are normal and do not refer to appliance malfunction.

The Examples of cooking applications

Using fats and oils

When the temperature is too high, the fat begins to smoke (so-called “smoking point”)

Fats / Oils Max. temperature (°C) Smoking point (°C)

Butter 130 150

Pork fat 170 200

Beef fat 180 210

Olive oil 180 200

Sunflower oil 200 220

Groundnut oil 200 235

Coconut oil 200 240

Always pre-heat the appliance.

Food to be cooked Temperature (°C) Time / Tips

Fish and shellfish 140–160 Pre-heat the appliance

Salmon fillets 160 8 minutes, turn after 4 minutes

King prawns (without shell) 140 6 minutes, turn after 3 minutes

Shark steaks, approx. 2.5 cm

thick

160 10 minutes, turn after 5 mi-

nutes

Sole, Müllerin Art (fried in but-

ter)

140 8 minutes, turn after 4 mi-

nutes, light side first

Plaice filets 140 6 minutes, turn after 3 minutes

Veal 140–180 Pre-heat the appliance

Veal chop 180 10 minutes, turn after 5 mi-

nutes

34 Helpful hints and tips

Food to be cooked Temperature (°C) Time / Tips

Medallions of Veal, 4 cm thick 160 10 minutes, turn after 5 mi-

nutes

Veal steaks, 3 - 4 cm thick 160 6 minutes, turn after 3 minutes

Veal escalope, natural 180 5 minutes, turn after 2½ mi-

nutes

Veal fricasee in cream sauce 180 6 minutes, turn after 3 minutes

(the meat strips should not e

stuck to each other)

Beef 160–180 Pre-heat the appliance

Beef steak blau, very rare 180 2 minutes, turn after 1 minute

blutig, rare 180 6 minutes, turn after 3 minutes

rosa, medium 180 8 minutes, turn after 2 minutes

durch, well done 180 8 minutes, turn after 4 minutes

without fatty substances, the

roasting time increases by ap-

proximately 20 %

Hamburger 160 6 - 8 minutes, turn after 3 - 4

minutes

Châteaubriand 160 then 100 Sauté the meat in oil on all

sides (turn only when the meat

does not stick to the pan) Fin-

ish off on one side for 10 mi-

nutes (100°C )

Pork 160–180 Pre-heat the appliance

Medallions of pork 160 8 minutes, turn after 4 minutes

(depending on the thickness)

Pork steaks 180 8 minutes, turn after 4 minutes

Pork escalope 160 6 minutes, turn after 3 minutes

Spare ribs 160 8 - 10 minutes, turn several

times

Pork skewer 160 6 – 8 minutes, sauté well on all

sides

Lamb 160–180 Pre-heat the appliance

Lamb chops 180 10 minutes, turn after 5 mi-

nutes

Filet of lamb 160 10 minutes, turn after 5 mi-

nutes (important here is that

the filets are fried on all sides)

Lamb steaks 160 6 - 8 minutes, turn after 3 - 4

minutes

Helpful hints and tips 35

Food to be cooked Temperature (°C) Time / Tips

Poultry 140–160 Pre-heat the appliance

Chicken supreme 140 8 - 10 minutes, turn after 4 - 5

minutes

Turkey breast strips 160 6 minutes, turn several times

Sausages 160 Pre-heat the appliance

Fried egg 140 Pre-heat the appliance

Crepes / Omelettes 140-160 Pre-heat the appliance

Fruits 140-160 Pre-heat the appliance

Vegetables 140-160 10 – 20 minutes, turn several

times

Vegetables 140-160 10 - 15 minutes, under a cook-

ing lid (turn half way through)

Cook the pre-cooked rice 140-160 10 – 15 minutes, turn several

times

Cook the pre-cooked noodles 140-160 15 - 20 minutes, turn half way

through

Information on acrylamides

Important! According to the newest scientific knowledge, if you brown food (specially the

one which contains starch), acrylamides can pose a health risk. Thus, we recommend that

you cook at the lowest temperatures and do not brown food too much.

CARE AND CLEANING

Clean the appliance after each use.

Always use cookware with clean bottom.

WARNING!

Sharp objects and abrasive cleaning agents will damage the appliance.

For your safety, do not clean the appliance with steam blasters or high-pressure cleaners.

Cleaning function

1. Touch . Both zones are set to temperature 80°C. The display blinks until tempera-

ture reaches 80°C. It locks the control panel, but not

.

2. When the temperature is 80°C, the sound sounds. The control panel is active.

3. Place the ice cubes onto the roasting zone one after another (you can use also cold

water). At the same time, loosen the roasting leftovers using a spatula and push them

into the trough until all leftovers have been removed.

4. Rub the appliance dry with a clean cloth.

Cleaning when the appliance is cold

1. Allow a suitable fat solvent to react for 5 minutes.

36 Care and cleaning

2. Remove the cooking residues using a spatula.

3. Clean the appliance with a moist cloth

4. Rub the appliance dry with a clean cloth.

5. At the end rub the appliance with some fat.

WARNING!

• Do not use the scraper or sharp objects to clean

the glass bar and the space between it and

glass ceramic. Glass bar is attached to the ce-

ramic plate.

• Do not put the pots on the glass bar.

• Make sure that the pans and pots do not touch

the glass bar.

WHAT TO DO IF…

Problem Possible cause and remedy

You cannot activate the appli-

ance or operate it.

• You touched 2 or more sensor fields at the same time. Only

touch one sensor field.

• There is water or fat stains on the control panel. Clean the

control panel

• Activate the appliance again and set the heat setting in 7 sec-

onds.

• The child safety device or the lock operates. See the chapter

Operating the appliance.

A sound operates when the ap-

pliance is deactivated.

You put something on one or more sensor fields. Remove the ob-

ject from the sensor fields.

The residual heat indicator does

not come on.

The cooking zone is not hot because it operated only for a short

time. If the cooking zone must be hot, speak to the service centre.

A sound operates and appli-

ance activates and deactivates

again. After 5 seconds one

more sound operates.

You put something . Remove the object from the sensor field.

comes on

The Automatic Switch Off operates. Deactivate the appliance and

activate it again.

and number come on.

There is an error in the appliance.

Disconnect the fuse from the electrical system of the house in

order to disconnect the appliance from the electrical supply for

some time. Connect again. If

comes on again, speak to the

service centre.

What to do if… 37

Problem Possible cause and remedy

There is no signal when you

touch the panel sensor fields.

The signals are deactivated.

Activate the signals (see OffSound Control ).

If you tried the above solutions and cannot repair the problem, speak to your dealer or the

Customer Care Department. Give the data from the rating plate, three-digit-letter code for

the glass ceramic (it is in the corner of the cooking surface) and an error message that

comes on.

If you operated the appliance incorrectly, the servicing by a customer service technician or

dealer will not be free of charge, even during the warranty period. The instructions about

the customer service and conditions of guarantee are in the guarantee booklet.

ENVIRONMENT CONCERNS

The symbol on the product or on its packaging indicates that this product may not be

treated as household waste. Instead it should be taken to the appropriate collection point

for the recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste

handling of this product. For more detailed information about recycling of this product,

please contact your local council, your household waste disposal service or the shop where

you purchased the product.

Packaging material

The packaging materials are friendly to the environment and can be recycled. The plastic

components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as

household waste at the waste disposal facilities in your municipality.

38 Environment concerns

Page is loading ...

www.aeg.com/shop 892934126-A-152011

Aeg-Electrolux HC452600EB User manual

Aeg-Electrolux HC452600EB User manual

in other languages

Related papers

Other documents