Masterbuilt MB20101719 User manual

Type
User manual

Masterbuilt MB20101719 is a leg kit designed to fit the MES 300 and MES 400 Series by Masterbuilt. It comprises various parts like legs, braces, axle, wheels, and casters, enabling you to attach sturdy legs to your smoker for enhanced stability and mobility. With this kit, you can elevate your smoker off the ground, making it easier to move around and access for cleaning and maintenance. The large wheels and locking swivel casters provide smooth rolling and secure positioning, allowing you to conveniently relocate your smoker as needed.

Masterbuilt MB20101719 is a leg kit designed to fit the MES 300 and MES 400 Series by Masterbuilt. It comprises various parts like legs, braces, axle, wheels, and casters, enabling you to attach sturdy legs to your smoker for enhanced stability and mobility. With this kit, you can elevate your smoker off the ground, making it easier to move around and access for cleaning and maintenance. The large wheels and locking swivel casters provide smooth rolling and secure positioning, allowing you to conveniently relocate your smoker as needed.

Welcome to the family. Let’s get started.
Master it. Masterbuilt.
Manual Code: 9810180001 190226-GSB
SMOKER LEG KIT
Manual applies to the following model number(s)
MB20101719
• To avoid personal injury and/or property damage, please read and follow all of these instructions
before assembly and operation.
• Use legs on stable and level surface only.
• Keep this manual for future reference.
WARNING
BEFORE ASSEMBLY READ ALL INSTRUCTIONS CAREFULLY.
• Assemble on a clean flat surface.
• Tools needed: Adjustable wrench, pliers, Phillips head screwdriver
• Approximate assembly time: 45 minutes
• Actual product may differ from picture shown.
2
NO QTY DESCRIPTION
1 1 14” Left Rear Leg
2 1 14” Right Rear Leg
3 1 14” Left Front Leg
4 1 14” Right Front Leg
5 2 Rear Brace*
6 2 Front Brace*
Parts List
NO QTY DESCRIPTION
7 1 Left Side Brace
8 1 Right Side Brace
9 2 Axle*
10 2 Large Wheel with Cap
11 2 3” Locking Swivel Caster
1
2
4
5
6
7
8
11
3
10
9
10
11
*This leg kit is designed to fit the MES 300 and MES 400 Series by Masterbuilt. Additional parts are included
but only certain parts are needed based on the size of your smoker.
Hardware List
Ø6 Washer
Qty-10
C
M6 Flange Nut
Qty-16
B
Ø10 Washer
Qty-4
D
M10x20 Screw
Qty-2
E
M6x16 Screw
Qty-26
A
Axle Nut
Qty-2
F
3
B
B
A
A
A
A
B
B
X4
A
B
X4
Assembly
1
2
Remove grease tray. Grease tray
brackets can remain attached to
bottom of smoker, but are not
pictured in the leg kit assembly
steps.
Grease Tray Bracket
Grease Tray
Remove front brace.
4
B
B
A
A
A
A
B
B
X8
A
B
X8
B
B
A
A
A
A
B
B
X4
A
B
X4
3
Assembly
4
Remove rear brace.
Remove left and right
side braces.
5
E
D
Remove and re-use
screw and washer
R/R
R/R
D
X2
X2
E
A
A
C
C
A
A
C
C
X4
A
C
X4
Assembly
5
6
Remove rear leg screws and
washer from back of smoker.
Remove rear legs from smoker. The smaller screws and washers will be
re-used to assemble new legs.
6
Assembly
7
8
3
4
A
C
A
C
A
C
X6
A
C
X6
X6
A
A
A
A
C
C
C
C
X6
Remove front legs from smoker.
Install left and right front legs with casters.
11
11
7
A
C
C
A
C
C
A
A
1
2
X4
A
C
X4
9
10
Assembly
1
2
E
D
Remove and re-use
screw and washer
R/R
R/R
D
X2
X2
E
Install left and right rear legs. Re-use smaller screws
and washers removed in step 6.
Secure left and right rear
legs to back of smoker.
1
8
9
11
12
Assembly
10
10
F
D
D
F
F
X2
Install axle through holes in rear legs, then large
wheels with caps.
A
B
A
B
B
B
A
A
7
8
Install left and right side braces.
X8
A
B
X8
D
X2
9
13
14
Assembly
Install rear brace.
Install front brace.
A
B
5
A
B
B
B
A
A
B
A
B
A
A
A
B
B
X4
A
B
X4
X4
A
B
X4
6
10
15
Assembly
Install grease tray through front
brace into grease tray brackets.
Smoker should only be rolled on a smooth surface. Smoker should never be rolled up or down stairs or
uneven surfaces. Potential damage to smoker or harm to user may result from failure to follow warnings.
WARNING
DO NOT RETURN TO RETAILER for assembly assistance, missing or damaged parts. Please
contact MASTERBUILT customer service at 1-800-489-1581 or support.masterbuilt.com.
STOP
11
Visit masterbuilt.com or complete form below and return to:
Attn: Warranty Registration
Masterbuilt Manufacturing, LLC
1 Masterbuilt Court | Columbus, GA 31907
Name: ___________________________ Address: __________________________________________
City: ______________________________________________________________________________
State/Province: ________ Postal Code: ________________ Phone Number: _______________________
E-mail Address: ______________________________________________________________________
*Model Number: ______________________________ *Serial Number: ___________________________
Purchase Date: _____- ______-_______ Place of Purchase: ____________________________________
*Model Number and Serial Number are located on silver label on back of smoker.
Masterbuilt 1-Year Limited Warranty
Masterbuilt warrants its products to be free from defects in material and workmanship under
proper assembly, normal use and recommended care for 1 year from the date of original retail
purchase. The Masterbuilt warranty does not cover paint finish as it may burn off during normal
use. The Masterbuilt warranty does not cover rust. Masterbuilt requires proof of purchase for
warranty claim, such as a receipt. Upon the expiration of such warranty, all such liability shall
terminate.
Within the stated warranty period, Masterbuilt, at its discretion, shall replace defective
components free of charge, with the owner being responsible for shipping. Should Masterbuilt
require return of component(s) in question for inspection, Masterbuilt will be responsible for
shipping charges to return requested item. This warranty excludes property damage sustained
due to misuse, abuse, accident, or damage arising out of transportation.
This express warranty is the sole warranty given by Masterbuilt and is in lieu of all other
warranties, expressed or implied including implied warranty, merchantability, or fitness for a
particular purpose. Neither Masterbuilt nor the retail establishment selling this product has
authority to make any warranties or to promise any remedies in addition to or inconsistent with
those stated above. Masterbuilt’s maximum liability, in any event, shall not exceed the purchase
price of the product paid by the original consumer/ purchaser. Some states do not allow the
exclusion or limitation of incidental or consequential damages. In such a case, the above
limitations or exclusions may not be applicable.
California residents only: Not withstanding this limitation of warranty, the following specific
restrictions apply; if service, repair, or replacement of the product is not commercially practical,
the retailer selling the product or Masterbuilt will refund the purchase price paid for the product,
less the amount directly attributable to use by the original buyer prior to the discovery of the
nonconformity. Owner may take the product to the retail establishment selling this product in
order to obtain performance under warranty. This express warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
Rest assured, we’re here to help.
Customer Service
masterbuilt.com/contact
Masterbuilt Manufacturing, LLC
1 Masterbuilt Court | Columbus, GA | 31907
@masterbuilt
1.800.489.1581
masterbuilt.com
Soyez assurés que nous sommes ici pour aider.
Service à la clientèle
masterbuilt.com/contact
Masterbuilt Manufacturing, LLC
1 Masterbuilt Court | Columbus, GA | 31907
@masterbuilt
1.800.489.1581
masterbuilt.com
Tenga por seguro, que estamos aquí para ayudarle.
Servicio al cliente
masterbuilt.com/contact
Masterbuilt Manufacturing, LLC
1 Masterbuilt Court | Columbus, GA | 31907
@masterbuilt
1.800.489.1581
masterbuilt.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Masterbuilt MB20101719 User manual

Type
User manual

Masterbuilt MB20101719 is a leg kit designed to fit the MES 300 and MES 400 Series by Masterbuilt. It comprises various parts like legs, braces, axle, wheels, and casters, enabling you to attach sturdy legs to your smoker for enhanced stability and mobility. With this kit, you can elevate your smoker off the ground, making it easier to move around and access for cleaning and maintenance. The large wheels and locking swivel casters provide smooth rolling and secure positioning, allowing you to conveniently relocate your smoker as needed.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI