Pulsar P-POE2 Operating instructions

P-POE2

v.1.0

P-POE2

Splitter 2xRJ45 (plug) - 1xRJ45 (socket)

Edition: 1 from 24.06.2019

Supercedes edition: ----------------------

1. Technical description

Splitter P-POE2 enables transfer of power and data to two IP PoE cameras or other devices, that are compliant

with this standard, using UTP twisted pair cable cat. 5e. It uses 4 pairs of wires, where two pairs support one device, while

the other two support second device. This requires only the use of accessories that are compliant with the 802.3af/at mode

A (endspan) standard, transmit data and power supply in pairs 1/2 and 3/6. Device is designed to work in 10/100Mb/s

networks.

Connection schemes

Fig. 1.

Fig. 2.

Pulsar sp. j.

Siedlec 150, 32-744 Łapczyca, Polska

Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50

e-mail: biuro@pulsar.pl, sale[email protected]

http:// www.pulsar.pl, www.zasilacze.pl

WEEE MARKING

According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste and to collect

such WEEE separately.