TB-2
v1.0
TB-2 (2x S. C.-simplex adapter, 2x splice, excess wire)
Edition: 1 from 01.06.2017
Supercedes the edition: -------------------
The TB-2 termination box
1. Technical description.
The termination box is designed for use in FTTH (Fiber to the home) configuration.
Main features:
- Can be used for excess wire (optical fibers) storage,
- Space for two SC / APC fiber adapters (the possibility of mounting other adapters, i.e. SC / LC / FC adapters of the
same dimensions,
- Space for two fusion or one mechanical splice,
- Locking mechanism: latch.
2. Technical parameters.
Two fusion or one mechanical splice
Dimensions (diameter/length)
CE, one year from the date of manufacture
3. Application:
The termination box is a perfect final element of a fiber-optic installation; in addition, it can be used as an additional
equipment for telecommunication enclosures. The TB-2 termination box can be used for excess fiber optic cable storage,
mounting of fiber optic adapters, and splice protection.
The termination box acts as a patch panel/switchgear - organizing, simplifying, and shortening the assembly time of the
system.
WEEE MARK
According to the EU WEE Directive – It is required not to dispose of electric or electronic
waste as unsorted municipal waste and to collect such WEEE separately.
Pulsar
Siedlec 150, 32-744 Łapczyca, Polska
Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50
http:// www.pulsar.pl, www.zasilacze.pl