LG BP540 Owner's manual

www.lg.com

Please read this manual carefully before operating

your set and retain it for future reference.

BP540

OWNER’S MANUAL

Smart 3D

Blu-ray Disc™ /

DVD Player

P/NO : MFL68142831_1.0

Getting Started 3

Getting Started

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral triangle

is intended to alert the user to the

presence of uninsulated dangerous

voltage within the product’s

enclosure that may be of sucient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature accompanying the

product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

Use of controls, adjustments or the performance of

procedures other than those specied herein may

result in hazardous radiation exposure.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon

a dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an

exact replacement part by an authorized service

center. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. To

disconnect power from the mains, pull out the

mains cord plug. When installing the product,

ensure that the plug is easily accessible.

Getting Started4

Getting Started

1

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the

battery from the equipment: Remove the

old battery or battery pack, follow the steps

in reverse order than the assembly. To prevent

contamination of the environment and bring on

possible threat to human and animal health, the

old battery or the battery put it in the appropriate

container at designated collection points. Do

not dispose of batteries or battery together with

other waste. It is recommended that you use

local, free reimbursement systems batteries and

accumulators. The battery shall not be exposed to

excessive heat such as sunshine, re or the like.

CAUTION: The apparatus shall not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, shall be placed on the

apparatus.

Industry Canada Statement:

This device complies with RSS-210 of the Industry

Canada Rules. Operation is subject to the following

two conditions:

1) this device may not cause interference and

2) this device must accept any interference, including

interference that may cause undesired operation of the

device

This class B digital apparatus complies with Canadian

ICES-003

CAN ICES-3 (B)/NMB-3(B)

IC Radiation Exposure Statement:

This equipment complies with IC radiation exposure

limits set forth for an uncontrolled environment.

This equipment should be installed and operated with

minimum distance 20 cm between the radiator & your

body.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE

FOR ANY RADIO OR TV INTERFERENCE CAUSED BY

UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.

SUCH MODIFICATIONS COULD VOID THE USER’S

AUTHORITY TO OPERATE THE EQUIPMENT.

Notes on copyrights

y

Because AACS (Advanced Access Content

System) is approved as content protection

system for Blu-ray Disc format, similar to use of

CSS (Content Scramble System) for DVD format,

certain restrictions are imposed on playback,

analog signal output, etc., of AACS protected

content. The operation of this product and

restrictions on this product may vary depending

on your time of purchase as those restrictions

may be adopted and/or changed by AACS after

the production of this product.

y

Furthermore, BD-ROM Mark and BD+ are

additionally used as content protection systems

for Blu-ray Disc format, which imposes certain

restrictions including playback restrictions for

BD-ROM Mark and/or BD+ protected content. To

obtain additional information on AACS, BD-ROM

Mark, BD+, or this product, please contact an

authorized Customer Service Center.

y

Many BD-ROM/DVD discs are encoded with

copy protection. Because of this, you should only

connect your player directly to your TV, not to a

VCR. Connecting to a VCR results in a distorted

picture from copy-protected discs.

y

This product incorporates copyright protection

technology that is protected by U.S. patents

and other intellectual property rights. Use of

this copyright protection technology must be

authorized by Rovi Corporation, and is intended

for home and other limited viewing uses only

unless otherwise authorized by Rovi Corporation.

Reverse engineering or disassembly is prohibited.

y

Under the U.S. Copyright laws and Copyright

laws of other countries, unauthorized recording,

use, display, distribution, or revision of television

programs, videotapes, BD-ROM discs, DVDs, CDs

and other materials may subject you to civil and/

or criminal liability.

y

Watching a 3D content for a long period

time may cause dizziness or tiredness.

y

It is not recommended to watch a movie

in 3D mode for inrm, child and pregnant

woman.

y

If you are experiencing headache, tiredness

or dizziness while viewing content in 3D,

it is strongly recommended to stop the

playback and rest until you feel normal.

>

Caution

Getting Started 5

Getting Started

1

IMPORTANT SAFETY

INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade or

the third prong are provided for your safety. If

the provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specified by

the manufacturer.

12. Use only with the cart, stand,

tripod, bracket, or table specified

by the manufacturer, or sold

with the apparatus. When a

cart is used, use caution when

moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or

moisture, does not operate normally, or has

been dropped.

Table of Contents6

Table of Contents

1 Getting Started

3 Safety Information

8 Introduction

8 – Playable discs and symbols used in

this manual

9 – About the “7” symbol display

9 – Regional code

10 Remote Control

11 Front Panel

11 Rear Panel

2 Connecting

12 Connecting to your TV

13 – What is SIMPLINK?

13 – Resolution setting

14 Connecting to an Amplifier

15 – Connecting to an amplifier via HDMI

output

15 – Connecting to an amplifier via digital

audio output

16 Connecting to your Home Network

16 – Wired network connection

16 – Wired network setup

18 – Wireless network connection

18 – Wireless network setup

3 System Setting

21 Initial Setup

22 Settings

22 – Adjust the setup settings

22 – [NETWORK] menu

24 – [DISPLAY] menu

25 – [LANGUAGE] menu

26 – [AUDIO] menu

27 – [LOCK] menu

28 – [OTHERS] menu

4 Operating

29 Home Menu Display

29 – Using [HOME] menu

29 – Using the SmartShare

30 Playing the Linked Devices

30 – Playing a disc

30 – Playing Blu-ray 3D disc

31 – Playing a file on disc/USB device

32 – Playing a file on Android device

33 – Playing a file on a network server

34 Using Home Network Server for PC

34 – About SmartShare PC Software

(DLNA)

34 – Downloading SmartShare PC

Software (DLNA)

34 – Installing SmartShare PC Software

(DLNA)

35 – Sharing files and folders

35 – System requirements

36 General Playback

36 – Basic operations for video and audio

content

36 – Basic operations for photo content

36 – Using the disc menu

37 – Resume playback

37 – Last scene memory

38 On-Screen Display

38 – To control video playback

39 – To control photo view

40 Advanced Playback

40 – Repeat playback

40 – Repeating a specific portion

40 – Playing from selected time

41 – Selecting a subtitle language

41 – Hearing a different audio

41 – Watching from a different angle

41 – Changing the TV Aspect Ratio

42 – Changing subtitle Code Page

42 – Changing the Picture Mode

43 – Viewing content information

43 – Changing content list view

43 – Selecting a subtitle file

44 – Listening to music during slide show

44 – Playing file encoded in 3D

45 Advanced Features

45 – Wi-Fi Direct™

Table of Contents 7

1

2

3

4

5

6

46 – Enjoying BD-Live™

46 – LG AV Remote

46 – Private Sound Mode

47 – Audio CD recording

48 Using the Premium

48 Using the LG Smart World

49 – Signing in

49 – Searching online content

50 Using the My Apps Menu

5 Troubleshooting

51 Troubleshooting

51 – General

52 – Network

53 – Picture

53 – Customer support

53 – Open source software notice

6 Appendix

54 Controlling a TV with the Supplied

Remote Control

54 – Setting up the remote to control your

TV

55 Network Software Update

55 – Network update notification

55 – Software update

57 Additional Information

57 – File requirement

58 – AVCHD (Advanced Video Codec High

Definition)

59 – About DLNA

59 – Certain system requirements

59 – Compatibility notes

60 Audio Output Specifications

62 Area Code List

63 Language Code List

64 Trademarks and Licenses

66 Specifications

67 Maintenance

67 – Handling the unit

67 – Notes on discs

68 Important Information relating to Network

Services

Some of the content in this manual may dier from your player depending on the software of the

player or your service provider.

Getting Started8

Getting Started

1

Introduction

Playable discs and symbols used in this manual

Media/Term Logo Symbol Description

Blu-ray

e

y

Discs such as movies that can be purchased or

rented.

y

“Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.

y

BD-R/RE discs that are recorded in BDAV format.

y

u

i

y

BD-R/RE discs that contain Video, Audio or

Photo les.

y

ISO 9660+JOLIET, UDF and UDF Bridge format

DVD-ROM

DVD-R

DVD-RW

DVD+R

DVD+RW

r

y

Discs such as movies that can be purchased or

rented.

y

Video mode and nalized only

y

Supports the dual layer disc also

o

Finalized AVCHD format

y

u

i

y

DVD±R/RW discs that contain Video, Audio or

Photo les.

y

ISO 9660+JOLIET, UDF and UDF Bridge format

DVD-RW (VR)

r

VR mode and nalized only

Audio CD

t

Audio CD

CD-R/RW

y

u

i

y

CD-R/RW discs that contain Video, Audio or

Photo les.

y

ISO 9660+JOLIET, UDF and UDF Bridge format

Note –

,

Indicates special notes and operating features.

Caution –

>

Indicates cautions for preventing possible damages

from abuse.

Getting Started 9

Getting Started

1

y

Depending on the conditions of the

recording equipment or the CD-R/RW (or

DVD±R/RW) disc itself, some CD-R/RW (or

DVD±R/RW) discs cannot be played on the

unit.

y

Depending on the recording software & the

nalization, some recorded discs (CD-R/RW,

DVD±R/RW, BD-R/RE) may not be playable.

y

BD-R/RE, DVD±R/RW and CD-R/RW discs

recorded using a personal computer or a

DVD or CD Recorder may not play if the

disc is damaged or dirty, or if there is dirt or

condensation on the player’s lens.

y

If you record a disc using a personal

computer, even if it is recorded in a

compatible format, there are cases in which

it may not play because of the settings of

the application software used to create the

disc. (Check with the software publisher for

more detailed information.)

y

This player requires discs and recordings to

meet certain technical standards in order to

achieve optimal playback quality.

y

Pre-recorded DVDs are automatically set to

these standards. There are many dierent

types of recordable disc formats (including

CD-R containing MP3 or WMA les) and

these require certain pre-existing conditions

to ensure compatible playback.

y

Customers should note that permission

is required in order to download MP3 /

WMA les and audio from the Internet.

Our company has no right to grant such

permission. Permission should always be

sought from the copyright owner.

y

You have to set the disc format option

to [Mastered] in order to make the discs

compatible with the LG players when

formatting rewritable discs. When setting

the option to Live System, you cannot use

it on LG player. (Mastered/Live File System :

Disc format system for windows Vista)

,

Note

About the “

7

” symbol display

“

7

” may appear on your TV display during

operation and indicates that the function explained

in this owner’s manual is not available on that

specic media.

Regional code

This unit has a regional code printed on the rear of

the unit. This unit can play only BD-ROM or DVD

discs labeled same as the rear of the unit or “ALL”.

Getting Started10

Getting Started

1

Battery Installation

Remove the battery cover on the

rear of the remote control, and

insert a R03 (size AAA) battery

with

4

and

5

matched correctly.

• • • • • •

a

• • • • • •

1

(POWER): Switches the player

ON or OFF.

B

(OPEN/CLOSE): Opens and

closes the disc tray.

0-9 numerical buttons: Selects

numbered options in a menu.

CLEAR: Removes a number when

setting the password or network

connection.

REPEAT (

h

): Repeats a desired

section or sequence.

• • • • • •

b

• • • • •

c/v

(SCAN): Searches

backward or forward.

C/V

(SKIP): Goes to the

next or previous chapter / track /

le.

Z

(STOP): Stops playback.

d

(PLAY): Starts playback.

M

(PAUSE): Pauses playback.

• • • • • •

c

• • • • •

HOME (

b

): Displays or exits the

[Home].

TITLE/POPUP: Displays the DVD

title menu or BD-ROM’s pop-up

menu, if available.

INFO/MENU (

m

): Displays or

exits On-Screen Display.

Direction buttons (

W/S/

A/D

): Selects an option in the

menu.

ENTER (

b

): Acknowledges menu

selection.

BACK (

1

): Exits the menu or

returns to the previous screen.

?

: This button is not available.

DISC MENU: Accesses menu on a

disc.

• • • • • •

d

• • • • •

Colored (R, G, Y, B) buttons: Use

to navigate BD-ROM menus. They

are also used as shortcut buttons

for specic menus.

TV Control Buttons: See page

54.

Remote Control

Getting Started 11

Getting Started

1

Front Panel

a

Disc Tray

b

Display Window

c

Remote Sensor

d

B

(OPEN / CLOSE)

e

N

(PLAY / PAUSE)

f

Z

(STOP)

g

1/!

(POWER)

h

USB Port

Rear Panel

a

AC power cord

b

LAN port

c

HDMI OUT

d

DIGITAL AUDIO OUT (COAXIAL)

Connecting12

Connecting

2

Connecting to your TV

If you have a HDMI TV or monitor, you can connect

it to this player using a HDMI cable (Type A, High

Speed HDMI™ Cable). Connect the HDMI jack on

the player to the HDMI jack on a HDMI compatible

TV or monitor.

Rear of the unit

TV

HDMI

cable

Set the TV’s source to HDMI (Refer to TV’s owner’s

manual).

Please refer to the manuals of your TV, Stereo

System or other devices as necessary to make

the best connections.

,

Note

Additional information for HDMI

y

When you connect a HDMI or DVI compatible

device make sure of the following:

-

Try switching o the HDMI/DVI device and

this player. Next, switch on the HDMI/DVI

device and leave it for around 30 seconds,

then switch on this player.

-

The connected device’s video input is set

correctly for this unit.

-

The connected device is compatible with

720x480p, 1280x720p, 1920x1080i or

1920x1080p video input.

y

Not all HDCP-compatible HDMI or DVI devices

will work with this player.

-

The picture will not be displayed properly

with non-HDCP device.

y

If a connected HDMI device does not accept

the audio output of the player, the HDMI

device’s audio sound may be distorted or

may not output.

y

When you use HDMI connection, you can

change the resolution for the HDMI output.

(Refer to “Resolution setting” on page 13)

y

Select the type of video output from the

HDMI OUT jack using [HDMI Color Setting]

option on the [Settings] menu (page 25).

y

Changing the resolution when the

connection has already been established

may result in malfunctions. To solve the

problem, turn o the player and then turn it

on again.

y

When the HDMI connection with HDCP

is not veried, TV screen is changed to

black screen. In this case, check the HDMI

connection, or disconnect the HDMI cable.

y

If there are noises or lines on the screen,

please check the HDMI cable (length is

generally limited to 4.5 m).

,

Note

Connecting 13

Connecting

2

What is SIMPLINK?

Some functions of this unit are controlled by the

TV’s remote control when this unit and LG TV’s with

SIMPLINK are connected through HDMI connection.

Controllable functions by LG TV’s remote control;

Play, Pause, Scan, Skip, Stop, Power O, etc.

Refer to the TV owner’s manual for the details of

SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as

shown above.

Depending on the disc type or playing status,

some SIMPLINK operation may dier from your

purpose or not work.

,

Note

Resolution setting

The player provides several output resolutions for

HDMI OUT jack. You can change the resolution

using [Settings] menu.

1. Press HOME (

b

).

2. Use

A/D

to select the [Settings] and press

ENTER (

b

). The [Settings] menu appears.

3. Use

W/S

to select [DISPLAY] option then

press

D

to move to the second level.

4. Use

W/S

to select the [Resolution] option

then press ENTER (

b

) to move to the third level.

5. Use

W/S

to select the desired resolution then

press ENTER (

b

) to confirm your selection.

Connecting14

Connecting

2

y

If your TV does not accept the resolution

you have set on the player, you can set

resolution to 480p as follows:

1. Press

B

to open the disc tray.

2. Press

Z

(STOP) for more than 5 seconds.

y

If you select a resolution manually and then

connect the HDMI jack to TV and your TV

does not accept it, the resolution setting is

set to [Auto].

y

If you select a resolution that your TV

does not accept, the warning message

will appear. After resolution change,

if you cannot see the screen, please

wait 20 seconds and the resolution will

automatically revert back to the previous

resolution.

y

The 1080p video output frame rate may

be automatically set to either 24 Hz or

60 Hz depending both on the capability

and preference of the connected TV and

based on the native video frame rate of the

content on the BD-ROM disc.

,

Note

Connecting to an

Amplifier

Make one of the following connections, depending

on the capabilities of your existing equipment.

y

HDMI audio connection (page 15)

y

Digital audio connection (page 15)

Since many factors aect the type of audio output,

see “Audio Output Specications” for details (page

60).

About Digital Multi-channel sound

A digital multi-channel connection provides the

best sound quality. For this, you need a multi-

channel Audio/Video Receiver that supports one

or more of the audio formats supported by your

player. Check the logos on the front of the Audio/

Video receiver and the manual. (PCM Stereo, PCM

Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby

TrueHD, DTS and/or DTS-HD)

Connecting 15

Connecting

2

Connecting to an amplifier via

HDMI output

Connect the player’s HDMI OUT jack to the

corresponding in jack on your amplier using a

HDMI cable.

HDMI cable

TV

Receiver/Amplier

Rear of the unit

Connect the amplier’s HDMI output jack to HDMI

input jack on your TV using a HDMI cable if your

amplier has HDMI output jack (Refer to amplier’s

owner’s manual).

You will need to activate the player’s digital output.

(See “[AUDIO] Menu” on page 26.)

Connecting to an amplifier via

digital audio output

Connect the player’s COAXIAL OUT jack to the

corresponding in jack on your amplier using an

optional digital audio cable.

Coaxial

cable

Receiver/Amplier

Rear of the unit

You will need to activate the player’s digital output.

(See “[AUDIO] Menu” on page 26.)

Connecting16

Connecting

2

Connecting to your

Home Network

This player can be connected to a local area

network (LAN) via the LAN port on the rear panel or

the internal wireless module.

By connecting the unit to a broadband home

network, you have access to services such as

software updates, BD-Live interactivity and online

content services.

Wired network connection

Using a wired network provides the best

performance, because the attached devices

connect directly to the network and are not subject

to radio frequency interference.

Please refer to the documentation for your network

device for further instructions.

Connect the player’s LAN port to the corresponding

port on your Modem or Router using a

commercially available LAN or Ethernet cable.

y

When plugging or unplugging the LAN

cable, hold the plug portion of the cable.

When unplugging, do not pull on the LAN

cable but unplug while pressing down on

the lock.

y

Do not connect a modular phone cable to

the LAN port.

y

Since there are various connection

congurations, please follow the

specications of your telecommunication

carrier or internet service provider.

y

If you want to access content from DLNA

servers, this player must be connected to

the same local area network with them via a

router.

y

To set your PC as a DLNA server, install the

SmartShare PC Software on your PC. (page

34)

,

Note

Rear of the unit

Router

Broadband

service

DLNA certied servers

Wired network setup

If there is a DHCP server on the local area network

(LAN) via wired connection, this player will

automatically be allocated an IP address. After

making the physical connection, a small number of

home networks may require the player’s network

setting to be adjusted. Adjust the [NETWORK]

setting as follow.

Preparation

Before setting the wired network, you need to

connect the broadband internet to your home

network.

Connecting 17

Connecting

2

1. Select [Connection Setting] option in the

[Settings] menu then press ENTER (

b

).

2. Read the preparations for the network settings

and then press ENTER (

b

) while [Start] is

highlighted.

Network will automatically be connected to the

unit.

Advanced Setting

If you want to set the network settings manually,

use

W/S

to select [Advanced Setting] on the

[Network Setting] menu and press ENTER (

b

).

1. Use

W/S

to select [Wired] and press ENTER

(

b

).

2. Use

W/S/A/D

to select the IP mode

between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP

address automatically.

If there is no DHCP server on the network and

you want to set the IP address manually, select

[Static] then set [IP Address], [Subnet Mask],

[Gateway] and [DNS Server] using

W/S/

A/D

and numerical buttons. If you make a

mistake while entering a number, press CLEAR

to clear the highlighted part.

,

Note

3. Select [Next] and press ENTER (

b

) to apply

network settings.

Network connection status is displayed on the

screen.

4. Press ENTER (

b

) while [OK] is highlighted to

finish the wired network settings.

Connecting18

Connecting

2

Wireless network connection

Another connection option is to use an Access Point

or a wireless router. The network conguration and

connection method may vary depending on the

equipment in use and the network environment.

Wireless

Communication

DLNA certied servers

Access Point or

Wireless Router

Broadband

service

Refer to the setup instructions supplied with

your access point or wireless router for detailed

connection steps and network settings.

For best performance, a direct wired connection

from this player to your home network’s router or

cable/DSL modem is always the best option.

If you do chose to use the wireless option, note that

performance can sometimes be aected by other

electronic devices in the home.

Wireless network setup

For the wireless network connection, the player

needs to be set up for network communication.

This adjustment can be done from the [Settings]

menu. Adjust the [NETWORK] setting as follow.

Setting up the access point or the wireless router

is required before connecting the player to the

network.

Preparation

Before setting the wireless network, you need

to:

-

connect the broadband internet to the

wireless home network.

-

set the access point or wireless router.

-

note the SSID and security code of the

network.

1. Select [Connection Setting] option in the

[Settings] menu then press ENTER (

b

).

2. Read the preparations for the network settings

and then press ENTER (

b

) while [Start] is

highlighted.

If wired network is not connected to the unit, all

available networks are displayed on the screen.

3. Use

W/S

to select a desired SSID of wireless

network and press ENTER (

b

).

If you have security on your access point, you

need to input the security code as necessary.

If you use other characters than the english

alphabet or digits for the SSID name of your

access point or wireless router, it may be

displayed dierently.

,

Note

Connecting 19

Connecting

2

y

WEP security mode generally have 4 keys

available on an access point setting. If your

access point or wireless router use WEP

security, enter the security code of the key

“No.1” to connect on your home network.

y

An Access Point is a device that allows you

to connect to your home network wirelessly.

,

Note

4. Use

W/S/A/D

to select the IP mode

between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP

address automatically.

If there is no DHCP server on the network and

you want to set the IP address manually, select

[Static] then set [IP Address], [Subnet Mask],

[Gateway] and [DNS Server] using

W/S/

A/D

and numerical buttons. If you make a

mistake while entering a number, press CLEAR

to clear the highlighted part.

,

Note

5. Select [Next] and press ENTER (

b

) to apply

network settings.

Network connection status is displayed on the

screen.

6. Select [OK] and press ENTER (

b

) to complete

the network connection.

Advanced Setting

If you want to set the network settings manually,

use

W/S

to select [Advanced Setting] on the

[Network Setting] menu and press ENTER (

b

).

1. Use

W/S

to select [Wireless] and press ENTER

(

b

).

[AP List] - Scans all available access points or

wireless routers within range and display them

as a list.

[Network name (SSID)] – Your access point

may not be broadcasting its network name

(SSID). Check your access point settings through

your computer and either set your access

point to broadcast SSID, or manually enter the

network name in [Network name(SSID)].

[PBC] – If your access point or wireless

router that supports the PBC (Push Button

Configuration) method, select this option and

press the Push Button on your access point

within 120 counts. You do not need to know the

network name (SSID) and security code of your

access point.

[PIN] – If your access point supports the PIN

Code configuration method based on WPS(Wi-

Fi Protected Setup), select this option and

note the code number on the screen. And

then, enter the PIN number on a setting menu

of your access point to connect. Refer to the

documentation for your network device.

2. Follow the instructions of each connection

method on the screen.

To use PBC and PIN network connection,

security mode of your access point must be

set to OPEN or AES.

,

Note

Connecting20

Connecting

2

Notes on network connection

y

Many network connection problems during

set up can often be xed by re-setting the

router or modem. After connecting the player

to the home network, quickly power o and/

or disconnect the power cable of the home

network router or cable modem. Then power on

and/or connect the power cable again.

y

Depending on the internet service provider (ISP),

the number of devices that can receive internet

service may be limited by the applicable terms

of service. For details, contact your ISP.

y

Our company is not responsible for any

malfunction of the player and/or the internet

connection feature due to communication

errors/malfunctions associated with your

broadband internet connection, or other

connected equipment.

y

The features of BD-ROM discs made available

through the Internet Connection feature are not

created or provided by our company, and our

company is not responsible for their functionality

or continued availability. Some disc related

material available by the Internet Connection

may not be compatible with this player. If you

have questions about such content, please

contact the producer of the disc.

y

Some internet content may require a higher

bandwidth connection.

y

Even if the player is properly connected and

congured, some internet content may not

operate properly because of internet congestion,

the quality or bandwidth of your internet service,

or problems at the provider of the content.

y

Some internet connection operations may not

be possible due to certain restrictions set by the

Internet service provider (ISP) supplying your

broadband Internet connection.

y

Any fees charged by an ISP including, without

limitation, connection charges are your

responsibility.

y

A 10 Base-T or 100 Base-TX LAN port is required

for wired connection to this player. If your

internet service does not allow for such a

connection, you will not be able to connect the

player.

y

You must use a Router to use xDSL service.

y

A DSL modem is required to use DSL service and

a cable modem is required to use cable modem

service. Depending on the access method of and

subscriber agreement with your ISP, you may not

be able to use the internet connection feature

contained in this player or you may be limited

to the number of devices you can connect at

the same time. (If your ISP limits subscription to

one device, this player may not be allowed to

connect when a PC is already connected.)

y

The use of a “Router” may not be allowed or its

usage may be limited depending on the policies

and restrictions of your ISP. For details, contact

your ISP directly.

y

The wireless network operate at 2.4 GHz

radio frequencies that are also used by other

household devices such as cordless telephone,

Bluetooth® devices, microwave oven, and can be

aected by interference from them.

y

Turn o all unused network equipment in

your local home network. Some devices may

generate network trac.

y

For the purpose of the better transmission,

placing the player from the access point as close

as possible.

y

In some instances, placing the access point or

wireless router at least 0.45 m (1.5 ft.) above the

oor may improve the reception.

y

Move closer to the access point if possible or re-

orient the player so there is nothing between it

and the access point.

y

The reception quality over wireless depends on

many factors such as type of the access point,

distance between the player and access point,

and the location of the player.

y

Set your access point or wireless router to

Infrastructure mode. Ad-hoc mode is not

supported.

Page is loading ...

LG BP540 Owner's manual

LG BP540 Owner's manual

Related papers

Other documents