Primalux LED-BH305-14W4K User manual

522.450UK User Manual

LED-BH305-14W4K

LED Circular Bulkhead Fitting IP54

Item ref: 522.450UK

User Manual

Introduction

A weatherproof LED bulkhead for both internal and external

applications. Ideal for use in corridors, storerooms and

environments where water could be present, this bulkhead

fitting provides additional safety and security where required.

Safety

This is a mains powered product. It is designed to be installed

by suitably qualified personnel only and in accordance with

current building and electrical regulations. Before installation or

maintenance, the electrical supply to the product must be

isolated.

Luminaire Installation:

• To open the fitting rotate the polycarbonate cover anti-clockwise whilst holding the

base.

• Using a cross head screwdriver unscrew the single crosshead screw allowing the

plate to hinge open.

• Using the supplied fixing kit drill holes in each of the three mounting points and attach

to the ceiling or wall.

• Create a hole in the rubber gland mounted in the base plate for the mains cable.

• Install the mains cable in accordance with current regulations.

• Close the hinged LED plate with the crosshead screw.

• Finally, fit the polycarbonate cover and rotate clockwise to seal.

Dimensions

305mmø x 84mm

Errors and omissions excepted.