Miller WATERTANK l Owner's manual
- Category
- Welding System
- Type
- Owner's manual
This manual is also suitable for
Watertank L
Description
OM-180 231B 2015−08
Visit our website at
www.MillerWelds.com
File: Accessory
(PU 301)
Cooling System
Miller Electric manufactures a full line
of welders and welding related equipment.
For information on other quality Miller
products, contact your local Miller distributor to receive the latest full
line catalog or individual specification sheets. To locate your nearest
distributor or service agency call 1-800-4-A-Miller, or visit us at
www.MillerWelds.com on the web.
Thank you and congratulations on choosing Miller. Now you can get
the job done and get it done right. We know you don’t have time to do
it any other way.
That’s why when Niels Miller first started building arc welders in 1929,
he made sure his products offered long-lasting value and superior
quality. Like you, his customers couldn’t afford anything less. Miller
products had to be more than the best they could be. They had to be the
best you could buy.
Today, the people that build and sell Miller products continue the
tradition. They’re just as committed to providing equipment and service
that meets the high standards of quality and value established in 1929.
This Owner’s Manual is designed to help you get the most out of your
Miller products. Please take time to read the Safety precautions. They
will help you protect yourself against potential hazards on the worksite.
We’ve made installation and operation quick
and easy. With Miller you can count on years
of reliable service with proper maintenance.
And if for some reason the unit needs repair,
there’s a Troubleshooting section that will
help you figure out what the problem is. The
parts list will then help you to decide the
exact part you may need to fix the problem.
Warranty and service information for your
particular model are also provided.
Miller is the first welding
equipment manufacturer in
the U.S.A. to be registered to
the ISO 9001 Quality System
Standard.
Working as hard as you do
− every power source from
Miller is backed by the most
hassle-free warranty in the
business.
From Miller to You
Mil_Thank 2009−09
TABLE OF CONTENTS
SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING 1.................................
1-1. Symbol Usage 1.......................................................................
1-2. Cooling Equipment Hazards 1............................................................
1-3. Additional Symbols For Installation, Operation, And Maintenance 1.............................
1-4. California Proposition 65 Warnings 2......................................................
1-5. Principal Safety Standards 2.............................................................
SECTION 2 − SPECIFICATIONS 3..............................................................
2-1. Serial Number And Rating Label Location 3................................................
2-2. Specifications 3........................................................................
2-3. Coolant Requirements 3................................................................
SECTION 3 − INSTALLATION 4................................................................
3-1. Connections 4.........................................................................
SECTION 4 − MAINTENANCE AND TROUBLESHOOTING 5.......................................
4-1. Routine Maintenance 5.................................................................
4-2. Coolant Maintenance 5.................................................................
4-3. Troubleshooting 6......................................................................
SECTION 5 − ELECTRICAL DIAGRAMS 6.......................................................
SECTION 6 − PARTS LIST 8...................................................................
OM-180 231 Page 1
SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING
coolers 2013-10
7
Protect yourself and others from injury — read, follow, and save these important safety precautions and operating instructions.
1-1. Symbol Usage
DANGER! − Indicates a hazardous situation which, if
not avoided, will result in death or serious injury. The
possible hazards are shown in the adjoining symbols
or explained in the text.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible
hazards are shown in the adjoining symbols or ex-
plained in the text.
NOTICE − Indicates statements not related to personal injury.
Indicates special instructions.
This group of symbols means Warning! Watch Out! ELECTRIC
SHOCK, MOVING PARTS, and HOT PARTS hazards. Consult sym-
bols and related instructions below for necessary actions to avoid the
hazards.
1-2. Cooling Equipment Hazards
The symbols shown below are used throughout this manual
to call attention to and identify possible hazards. When you
see the symbol, watch out, and follow the related instructions
to avoid the hazard. The safety information given below is
only a summary of the more complete safety information
found in the Safety Standards listed in Section 1-5. Read and
follow all Safety Standards.
Only qualified persons should install, operate, maintain, and
repair this unit.
During operation, keep everybody, especially children, away.
Touching live electrical parts can cause fatal shock
s
or severe burns. The input power circuit and machine
internal circuits are also live when power is on
.
Incorrectly installed or improperly grounded equip
-
ment is a hazard.
ELECTRIC SHOCK can kill.
Do not touch live electrical parts.
Disconnect input power or stop engine before installing or
servicing this equipment. Lockout/tagout input power according to
OSHA 29 CFR 1910.147 (see Safety Standards).
Properly install, ground, and operate this equipment according to
its Owner’s Manual and national, state, and local codes.
Always verify the supply ground − check and be sure that input
power cord ground wire is properly connected to ground terminal in
disconnect box or that cord plug is connected to a properly
grounded receptacle outlet.
Keep cords dry, free of oil and grease, and protected from hot metal
and sparks.
Frequently inspect input power cord and ground conductor for
damage or bare wiring – replace immediately if damaged – bare
wiring can kill.
Turn off all equipment when not in use.
Use only well-maintained equipment. Repair or replace damaged
parts at once. Maintain unit according to manual.
Keep all panels and covers securely in place.
HOT PARTS can burn.
Do not touch hot parts bare handed.
Allow cooling period before working on equip-
ment.
To handle hot parts, use proper tools and/or
wear heavy, insulated welding gloves and
clothing to prevent burns.
HOT PARTS can burn.
Do not touch hot parts bare handed.
Allow cooling period before working on equip-
ment.
To handle hot parts, use proper tools and/or
wear heavy, insulated welding gloves and
clothing to prevent burns.
FLYING METAL or DIRT can injure eyes.
Wear approved safety glasses with side
shields even under your welding helmet.
1-3. Additional Symbols For Installation, Operation, And Maintenance
FALLING EQUIPMENT can injure.
Use equipment of adequate capacity to lift and
support unit.
If using lift forks to move unit, be sure forks are
long enough to extend beyond opposite side of
unit.
Keep equipment (cables and cords) away from moving vehicles
when working from an aerial location.
Follow the guidelines in the Applications Manual for the Revised
NIOSH Lifting Equation (Publication No. 94−110) when manu-
ally lifting heavy parts or equipment.
OVERUSE can cause OVERHEATING
Allow cooling period; follow rated duty cycle.
Do not block or filter airflow to unit.
MOVING PARTS can injure.
Keep away from moving parts such as fans.
Keep all doors, panels, covers, and guards
closed and securely in place.
Have only qualified persons remove doors, panels, covers, or
guards for maintenance and troubleshooting as necessary.
Reinstall doors, panels, covers, or guards when maintenance is
finished and before reconnecting input power.
OM-180 231 Page 2
READ INSTRUCTIONS.
Read and follow all labels and the Owner’s
Manual carefully before installing, operating, or
servicing unit. Read the safety information at
the beginning of the manual and in each
section.
Use only genuine replacement parts from the manufacturer.
Perform maintenance and service according to the Owner’s
Manuals, industry standards, and national, state, and local codes.
Read and understand the Safety Data Sheets (SDSs) and the
manufacturer’s instructions for adhesives, coatings, cleaners,
consumables, coolants, degreasers, fluxes, and metals.
1-4. California Proposition 65 Warnings
Welding or cutting equipment produces fumes or gases
which contain chemicals known to the State of California to
cause birth defects and, in some cases, cancer. (California
Health & Safety Code Section 25249.5 et seq.)
This product contains or produces a chemical known to the
state of California to cause cancer or birth defects (or other
reproductive harm). (California Health & Safety Code Section
25249.5 et seq.)
This product contains chemicals, including lead, known to
the state of California to cause cancer, birth defects, or other
reproductive harm. Wash hands after use.
1-5. Principal Safety Standards
Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,
is available as a free download from the American Welding Society at
http://www.aws.org or purchased from Global Engineering Documents
(phone: 1-877-413-5184, website: www.global.ihs.com).
Safe Practices for the Preparation of Containers and Piping for Welding
and Cutting, American Welding Society Standard AWS F4.1, from Glob-
al Engineering Documents (phone: 1-877-413-5184, website:
www.global.ihs.com).
Safe Practices for Welding and Cutting Containers that have Held Com-
bustibles, American Welding Society Standard AWS A6.0, from Global
Engineering Documents (phone: 1-877-413-5184,
website: www.global.ihs.com).
National Electrical Code, NFPA Standard 70, from National Fire Protec-
tion Association, Quincy, MA 02269 (phone: 1-800-344-3555, website:
www.nfpa.org and www. sparky.org).
Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,
from Compressed Gas Association, 14501 George Carter Way, Suite
103, Chantilly, VA 20151 (phone: 703-788-2700, website:
www.cganet.com).
Safety in Welding, Cutting, and Allied Processes, CSA Standard
W117.2, from Canadian Standards Association, Standards Sales, 5060
Spectrum Way, Suite 100, Ontario, Canada L4W 5NS (phone:
800-463-6727, website: www.csa-international.org).
Safe Practice For Occupational And Educational Eye And Face Protec-
tion, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, web-
site: www.ansi.org).
Standard for Fire Prevention During Welding, Cutting, and Other Hot
Work, NFPA Standard 51B, from National Fire Protection Association,
Quincy, MA 02269 (phone: 1-800-344-3555, website: www.nfpa.org.
OSHA, Occupational Safety and Health Standards for General Indus-
try, Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q,
and Part 1926, Subpart J, from U.S. Government Printing Office, Super-
intendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954
(phone: 1-866-512-1800) (there are 10 OSHA Regional Offices—
phone for Region 5, Chicago, is 312-353-2220, website:
www.osha.gov).
Applications Manual for the Revised NIOSH Lifting Equation, The Na-
tional Institute for Occupational Safety and Health (NIOSH), 1600
Clifton Rd, Atlanta, GA 30333 (phone: 1-800-232-4636, website:
www.cdc.gov/NIOSH).
OM-180 231 Page 3
SECTION 2 − SPECIFICATIONS
2-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the back. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
2-2. Specifications
Recirculating Coolant System For Water-Cooled GTAW Torches And GMAW Guns
Use With Guns/Torches Rated Up To 600 Amperes
3 gal (11.4 L) Coolant Tank Capacity; Maximum Cooling Capacity: 14,000 BTU/hr At 1.25 qt/min (1.2 L/min)
Dimensions: 23 in. (584 mm) Long, 12 in. (305 mm) Wide, 13-1/4 in. (337 mm) High Weight: 39 lb (18 kg)
Input Power: 100 Volts AC, 6.9 Amps, 50/60 Hz, Single-Phase Input Power
2-3. Coolant Requirements
MILLER Low
Conductivity Coolant
No. 174 599**
MILLER Aluminum Protecting
Coolant No. 174 600**;
Distilled Or Deionized Water OK
Above 32° F (0° C)
GTAW Or Where
HF* Is Used
GMAW Or Where Coolant
Contacts Aluminum Parts Or
Where HF* Not Used
Application
*HF: High Frequency Current
**MILLER coolants protect to -37° F (-38°C) and resist algae growth.
Coolant
OM-180 231 Page 4
SECTION 3 − INSTALLATION
3-1. Connections
801 190-D / 801 191-D
! Turn off power and disconnect
cooler plug.
! Install customer supplied power
plug and receptacle according to
all national, state, and local codes
1 Lift -Eye
If placing cooling unit on welding power
source, slots are provided in bottom of
unit so it fits over lift-eye.
To prevent overheating, make sure cool-
ing unit is positioned so airflow is not re-
stricted.
NOTICE − If welding power source has
a water valve, do not connect hoses to
water valve. Connect hoses as shown.
2 Coolant Out Hose
3 Coolant In Hose
4 Coolant Tank Cap
Fill tank with coolant. Use table in Section
2-3 to select proper coolant. Keep cool-
ant level full.
5 Flow Indicator
6 Power Switch
Use switch to turn cooler on and off.
7 Input power cord.
Customer to supply and install correct in-
put power plug and matching receptacle.
Operation:
Turn power switch On. Flow indicator
spins to indicate that at least 0.53 qt/min
(0.5 L/min) of coolant is flowing.
GTAW Connections
GMAW Connections
1
Tools Needed:
5/8 in.
2
3
4
5
6
7
OM-180 231 Page 5
SECTION 4 − MAINTENANCE AND TROUBLESHOOTING
4-1. Routine Maintenance
! Turn off power and unplug input power
cord..
Recycle
Coolant.
= Check = Change = Clean = Replace
* To be done by Factory Authorized Service Agent
Reference
Every
Month
Section 4-2
Clean Coolant Filter
Blow Out Heat Exchanger Fins
Every
Six
Months
Section 2-3, 4-2
Replace cracked parts Replace unreadable
Labels
Change Coolant If Using Water
Every
Twelve
Months
Section 2-3, 4-2
Change Coolant If Using Miller Coolant
3/8 in.
Tools Needed:
4-2. Coolant Maintenance
805 493-A / Ref. 801 194
1 Coolant Filter
Unscrew housing to clean filter.
Changing coolant: Drain coolant by
tipping unit forward. Fill with clean
water and run for 10 minutes. Drain
and refill.
If replacing hoses, use hoses
compatible with ethylene gly-
col, such as buna-N, neoprene,
or hypalon.
1
Recycle
Coolant.
OM-180 231 Page 6
4-3. Troubleshooting
Trouble Remedy
Coolant system does not work. Be sure input power cord is plugged in to energized receptacle.
Check line fuses or circuit breaker, and replace or reset if necessary.
Motor overheated. Unit starts running when motor has cooled.
Have Factory Authorized Service Agent check Power switch and motor.
Decreased or no coolant flow. Add coolant.
Check for clogged hoses or coolant filter.
Disconnect pump, and check for sheared coupling. Replace coupling if necessary.
SECTION 5 − ELECTRICAL DIAGRAMS
135 796-D
Figure 5-1. Circuit Diagram
OM-180 231 Page 7
Notes
OM-180 231 Page 8
SECTION 6 − PARTS LIST
1
34
35
2
10
9
13
14
15
16
11
17
18
18
26
30
31
26
27
28
29
24
32
33
11
21
7
8
21
19
20
11
12
22
23
11
25
24
20
3
6
5
4
22
805 495-A
Figure 7-1. Complete Assembly
Quantity
Description
Part
No.
Dia.
Mkgs.
Item
No.
Figure 7-1Complete Assembly.
1 +166562 Wrapper 1... .............. .. .......................................................
2 136816 Label, OTC Logo 1... ............... .. ...............................................
3 255480 Pump Coolant W/Fittings, (Includes) 1... ............... .. ...............................
4 5523 FTG, Hose Brs Barbed Elbow M 3/8 TBG X 3/8 NPT 2... .................. .... ..............
5 134795 Coupler, Drive Pump 1... ............... .... ...........................................
6 196990 Fitting, Hose Brs Barbed 1... ............... .. .......................................
7 089120 Clamp, Hose .375 − .450 Clip 1... ............... .. .....................................
8 196991 Hose, Nprn Brd No 1 X .250Id 1... ............... .. ....................................
9 MOT 179297 Motor, 1/4Hp 100/200VAC 50/60Hz 1425/1725 RPM Dual 1... .... ..... .. ............
10 166570 Blade, Fan 9.000 5wg 38deg .500 Bore Cw (Setscrew Included) 1... ............... .. ......
11 231400 Hose, Rubber Braided .375 X .625 OD X 17.000 2... ............... .. ....................
12 *010323 Clamp, Hose .250 - .625 Clp Dia... ............... ..
13 192454 Panel, Rear 1... ............... .. ....................................................
14 139042 Bushing, Strain Relief .270/.480 ID X .804 Mtg Hol 1... ............... .. ..................
15 PLG1 192455 Cable, Power 11 Ft 5 In 16GA 3C 1... .... .... .. ................................
16 196515 Radiator, Heat Exchanger 1... ............... .. ........................................
17 269910 Tank Coolant 1... ............... .. ...................................................
18 255483 Hose, Coolant Return w/Clamp 1... ............... .. ...................................
19 166608 Cap, Tank Screw-On w/Vent 1... ............... .. ......................................
20 255481 Hose, Pick-up Coolant w/Clamp 1... ............... .. ...................................
21 236084 Hose, Rubber Braided .375 ID X .650 OD X 10.500 1... ............... .. .................
22 255485 Hose, Rubber Braided .375 ID X .650 OD X 5.250 1... ............... .. ..................
23 166560 Ring, Ring Ext .500 Shaft Grv X .042thk 2... ............... .. ...........................
24 166564 Filter, In-Line 1... ............... .. ...................................................
25 168254 Clip, Filter Mounting 1... ............... .. ............................................
OM-180 231 Page 9
QuantityDescription
Part
No.
Dia.
Mkgs.
Item
No.
Figure 7-1Complete Assembly (continued).
226934 Indicator, Flow (Includes) 1..................... .. ........................................
26 Housing, Flow Indicator 1... .......................... ........................................
27 Paddle, Flow Indicator 1... ............................ .........................................
28 166566 O-Ring, 1.301 ID x .070CS (May Be Bought Separately) 1... ............... .... ............
29 Lens, Flow Indicator 1... ............................ ...........................................
30 S1 177396 Switch, Rocker DPST 15A 250VAC 1... ..... ...... .. ...............................
31 177399 Panel, Front 1... ............... .. ....................................................
32 Nameplate, (Order By Model And Serial Number) 1... .......................... ...................
33 179449 Fitting, Coolant Barbed 3/8tbg 5/8-18 Male 2... ............... .. .........................
34 188515 Label, OTC Warning K5710A 1... ............... .. ....................................
35 188516 Label, OTC Warning NK5646A 1... ............... .. ...................................
+When ordering a component originally displaying a precautionary label, the label should also be ordered.
*Hose clamps (2 per hose) should be ordered for any hose removal or repair.
BE SURE TO PROVIDE MODEL AND SERIAL NUMBER WHEN ORDERING REPLACEMENT PARTS.
TM-216 869 Page 10 Dynasty 350/700, Maxstar 350/700
Notes
Notes
ORIGINAL INSTRUCTIONS − PRINTED IN USA © 2015 Miller Electric Mfg. Co. 2015−01
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
International Headquarters−USA
USA Phone: 920-735-4505 Auto-Attended
USA & Canada FAX: 920-735-4134
International FAX: 920-735-4125
For International Locations Visit
www.MillerWelds.com
Model Name Serial/Style Number
Purchase Date (Date which equipment was delivered to original customer.)
Distributor
Address
City
State Zip
Please complete and retain with your personal records.
Always provide Model Name and Serial/Style Number.
Contact a DISTRIBUTOR or SERVICE AGENCY near you.
Welding Supplies and Consumables
Options and Accessories
Personal Safety Equipment
Service and Repair
Replacement Parts
Training (Schools, Videos, Books)
Technical Manuals (Servicing Information
and Parts)
Circuit Diagrams
Welding Process Handbooks
Contact the Delivering Carrier to:
For Service
Owner’s Record
File a claim for loss or damage during
shipment.
For assistance in filing or settling claims, contact
your distributor and/or equipment manufacturer’s
Transportation Department.
Contact your Distributor for:
To locate a Distributor or Service Agency visit
www.millerwelds.com or call 1-800-4-A-Miller
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Miller WATERTANK l Owner's manual
- Category
- Welding System
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Miller MC390417L Owner's manual
-
-
-
-
-
Miller MF120263L Owner's manual
-
-
-
-
Miller MH350424L Owner's manual
