Awnings in a Box® 3020758 Malay

TECHNICAL INFORMATION

Page 1 of 1

H:\Multi-Reach (H drive)\Technical Information for Material\Technical Information_Awnings & Door Canopies_2015-06-04 Rev (A).docx

SUPPORT

Composition 100% Solution Dyed Acrylic

Warp and Weft Count Nm 2/34

Construction 30 x 15 ends x picks

TECHNICAL SPECIFICATIONS

VALUE UNIT STANDARD

Weight 295

g/m

UNE-EN ISO 2286-2

Water penetration resistance 35

cm H

UNE-20811

Resistance to surface wetting (Spray Test) 100 NE 24920

Oil repellency 6 AATCC118

Warp tensile strength 130 daN/5 cm UNE-EN ISO 13934

Weft tensile strength 75 daN/5 cm UNE-EN ISO 13934

Warp elongation at break Max. 30 % UNE-EN ISO 13934

Weft elongation at break Max. 20 % UNE-EN ISO 13934

Warp tearing resistance 5 daN UNE-EN ISO 4674-1

Weft tearing resistance 3 daN UNE-EN ISO 4674-1

Color fastness to artificial weathering 7-8 UNE-EN ISO 105-B04

Tolerance +/- 5%

Average Values. No contract information

MAIN USES

Sun Protection: awnings, door canopies, and umbrellas

Download PDF

Awnings in a Box&reg; 3020758 Malay