TECHNICAL INFORMATION
Page 1 of 1
H:\Multi-Reach (H drive)\Technical Information for Material\Technical Information_Awnings & Door Canopies_2015-06-04 Rev (A).docx
SUPPORT
Composition 100% Solution Dyed Acrylic
Warp and Weft Count Nm 2/34
Construction 30 x 15 ends x picks
TECHNICAL SPECIFICATIONS
VALUE UNIT STANDARD
Weight 295
g/m
2
UNE-EN ISO 2286-2
Water penetration resistance 35
cm H
2
O
UNE-20811
Resistance to surface wetting (Spray Test) 100 NE 24920
Oil repellency 6 AATCC118
Warp tensile strength 130 daN/5 cm UNE-EN ISO 13934
Weft tensile strength 75 daN/5 cm UNE-EN ISO 13934
Warp elongation at break Max. 30 % UNE-EN ISO 13934
Weft elongation at break Max. 20 % UNE-EN ISO 13934
Warp tearing resistance 5 daN UNE-EN ISO 4674-1
Weft tearing resistance 3 daN UNE-EN ISO 4674-1
Color fastness to artificial weathering 7-8 UNE-EN ISO 105-B04
Tolerance +/- 5%
Average Values. No contract information
MAIN USES
Sun Protection: awnings, door canopies, and umbrellas
/
