Ematic dp745nav Owner's manual
- Category
- Car media receivers
- Type
- Owner's manual
This manual is also suitable for
MOTORIZED IN-DASH MONITOR/DVD
English Version
Warning:
Watching TV while driving is illegal in most states.
There is a safety feature on this device which enables viewing videos only when Parked.
All other features may still be used while driving, such as audio and Navigation but must be done with care.
Please contact an authorized installer for Professional Installation
X450NAV
00
2
Contents
Installation
Wiring Connections 12
Install the Unit 13
Detach the Unit 14
Install the Front Panel 15
Detach the Front Panel 16
2
1
Before You Start
Important Safeguards 4
About this manual 4
Precautions 5
Maintenance 6
Location & function of the controls 7
Remote control 9
Specifications 11
1
5
Main Menu
Main Menu Setup 19
Video Adjust 19
Audio Adjust 20
System Adjust 20
4
DVD/VCD/MP4
5
5
DVD/VCD/MP4 Setup 24
DVD/VCD/MP4 Play 24
Selecting Tracks Fast 24
Pause Playback 24
Stop Playback 24
Number Buttons 25
Play tracks at Random 25
Repeat Playing 25
Skip backward/forward/
25
System Switch 25
Slow Motion Playback 25
Increase Picture Size 26
On Screen Display 26
Setting the Playback Time 26
Changing Audio Language 27
Changing the Subtitle Language 27
Changing the Viewing Angle 27
Selecting Channel 27
Program Playing 28
Playing PBC(Menu) 28
Selecting Menu 28
DVD Setup Menu 28
F.F/F.REW the
Playback
6
CD/MP3/SD/USB
CD/MP3/SD/USB Setup
CD/MP3/SD/USB Play
Selecting Tracks Fast
Repeat Playing
Number Buttons
Selecting Track
Stop Play
Playing Tracks at Random
Pause Playback
Skip backwafd/forward/F.F/F.REW
the Playback
34
34
35
35
35
35
35
35
36
36
Common Operations
3
To Select Source by Menu 17
Reset the Unit 17
Turning the Unit On/Off 17
Volume Control 17
Setting the Sound Characteristics 17
Open the Display 17
EQ Setting 18
Turning Loudness On/Off 18
Insert an SD Card 18
Eject a Disc 18
Mute Function 18
Mode Selector 18
Infrared Sensor 18
Double Function 18
Bluetooth Operational Interface 40
Using a Bluetooth Wireless connection 40
Pairing Your Unit and Bluetooth Phone 40
Pairing in Handsfree Mode 40
Cellphone Pairing Mode 41
Bluetooth Connection and Disconnection 41
Using the Unit as a Handsfree Device 41
Last Number Dialing 41
To Dial by Cellphone 41
To Dial by the Unit 42
Using the Unit as Bluetooth Music 42
Audio Transfer between The Unit and
Phone 42
Simple Troubleshooting Guide 45
AUX Touch Screen Menu 39
00
3
Contents
Slow Motion Play
On Screen Display
Program Playing
Eject an SD Card
Eject a USB
36
36
36
36
36
AUX
8
7
Tuner
Listening to the Radio 37
Band Selector 37
Selecting The stored Station 37
Manual/Automatic Tuning 38
DX/LOC Selector 38
MO/ST Selector 38
Goto FREQ 38
Scanning/Memorizing Stations
Automatically 38
Number Buttons 38
Bluetooth Mode
9
Additional Information
11
IPOD
IPOD Play
Selecting Tracks Fast
Repeat Playing
Playing Tracks at Random
Pause Playback
43
43
43
43
43
File Selector 44
BACK 44
Eject IPOD 44
10
Before You Start
IMPORTANT SAFEGUARDS
About this manual
45
11
Additional Information
Simple Troubleshooting Guide
No power.
Check and make sure whether the fuse is blown,
replace with the proper value if necessary.
Some errors occur in
LCD or no function
pressing the button.
the
when
Unable to receive stations.
CDs cannot be loaded.
Sound skips.
Images skip.
Press RESET button.
Check and make sure whether the antenna is
inserted or the antenna is properly connected, if
not, insert the antenna or connect it properly.
A CD is loaded in the mechanism.
The CD is dirty or damaged.
Improper setting of the color system. Set the color
system according to the
connected television.
to PAL or NTSC
.
.
.
Note:
If any of the problems persist after check list had been reviewed, consult your nearest service dealer. Never
attempt to disassemble your unit by yourself.
The following checklist might help to solve the problems you may encounter when using
the unit. Please double check and make sure if the connection and the procedure of
the operation is done properly before using the checklist .below
Problem
Cause/Solution
.
.
.
Be sure to connect the color coded leads
according to the diagram. Incorrect con-
nections may cause the unit to malfunct-
,
ion or damage the vehicle s electrical sy-
stem.
Be sure to connect the speaker (-) leads
to the speaker (-) terminal. Never conn-
ect the left and right channel speaker c-
ables to each other or to the vehicle body.
Make sure all the connections are comp-
letely correct before turning on your unit.
When replacing the fuse(s), the replace-
ment must be of the same amperage as
shown on the fuse holder.
Do not block vents or radiator panels. B-
locking them will cause heat to build up
inside and may result in fire.
This unit features a number of sophisti-
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
This manual mainly explains remote
control operation. However, in
addition to those functions related with
DVD/VCD/CD/MP3/MP4/SD operation
that can only be operated by the remote
control, there are also functions that can be
operated by the buttons provided on the
main unit.
To lessen driver distraction from the road,
please install the unit in an appropriate
place.
Use the unit after starting the engine,
otherwise the car battery will be drained
and the unit cannot be started.
Do not use the unit in extreme high tem-
perature or such low temperature condi-
tions, and also avoid humidity and direct
sunlight.
Take care of the magnetism of the unit.
Do not put a credit card, cassette or w-
atch around the unit, or they may break
or lose some information .
To avoid disturbing the video frequency, keep
far away from the unit when using your
phone.
Do not put the remote under high
temperature or where the sun strikes it,
or else the control may not work
properly.
control
remote
1
2
3
4
5
6
7
8
9
10
11
solve
01
5
Before You Start
44
10
IPOD
During IPOD mode, press BACK button
on the remote control to go back to the previous
catalog.
BACK
Note:
During IPOD mode, press ROOT on the
remote control to go back to the root catalog,
press BACK to go back to the previous
catalog.
File Selector
You can touch the track on the screen to
play or touch the folder to open directly.
* Pressing MENU in the monitor or / also
performs the same function.
31
During IPOD mode, to take IPOD out, the
main unit will switch to radio mode.
During other mode, to take IPOD out, the
main unit will keep the original mode.
Eject IPOD
30
Type of disc
VCD
12cm
MP3
12cm
CD
12cm
NOTE: The unit is compatible with VCD1.0/1.1/2.0/3.0 version and DVCD disc.
12cm
DVD
Handle the disc by its edge to keep
the disc clean, and do not touch the surface.
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Do not use in extremely high or
low temperature. Be sure the
temperature inside the vehicle
is between +60 C and -10 C
before turning on your unit .
To enjoy optimum sound and
images while playing, handle the
discs as follows:
Do not use your CDs with paste residue
or ink attached.
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
(Shown in the picture)
Clean the discs with an optional clean-
ing cloth. Wipe each disc from the center out.
(Shown in the picture)
PRECAUTIONS
This unit can play the following discs only:
Recorded material
Sound and moving
pictures
Sound and moving
pictures
Sound only
Sound only
Size of disc
MPEG-4
12cm
Sound and moving
pictures
press the
43
Before You Start
01
6
10
IPOD
Repeat Playing
During playback, press
Press it again to
cancel this function.
RPT to track
repeat, disc repeat, off.
* This function is operated by using the remote
control only.
15
Note:
Playing Tracks at Random
During IPOD playback, when
RDM button, Shuffle off,
pressing
Shuffle Track,
Shuffle Album will be activated.
16
Note:
* This function is operated by using the remote
control only.
IPOD play
During IPOD playback, connect the IPOD
wire (5V) to the one on the backside of the
main unit. The unit will play the track in
IPOD.If an IPOD is loaded, you can go back
to the source status, press IPOD to enter into
IPOD setup:
Pause Playback
During IPOD mode, press
button to
pause the playback, Press it again to return
to normal playback.
Pressing in the monitor also performs
the same function.
Note:
*
27
1
2
3
4
5
6
7
8
9
10
MENU Press it to return to the previous
menu. Press and hold it to back to root
if first connection.
Play/ pause
Briefly press to play previous track,
press and hold to fast forward.
Briefly press to play next track,
press and hold to fast reverse.
AUDIO setup menu
To adjust AUDIO please refer to pages 19.
Press this button to mute.
You can adjust the volume by
gliding this strip horizontally.
Press this button to lock or unlock
the touch screen
During unlock status, glide up and down or
left and right on the blank space of screen
to switch to the previous or next mode.
Press this button to go back to the
select menu.
Current playing information
Current file directory list box
Selecting Tracks Fast
* Pressing / in the monitor to perform
the same function
Note:
During IPOD playback, press to play
previous track ,press to play next track .
21
21
110/133
05 10 KHz
06 20 KHz
07 mute
08 1KHz L
09 10KHz L
1
2
4 5 6 7
910
3
8
Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the fu-
ses. If the fuse is blown, check the po-
wer connection and replace with a n-
ew one. If the same problem occurs,
it would be subjected to the malfun-
ction. In such cases, please consult
to the nearest service dealer.
When the range of the operation of t-
he card remote control becomes short
or doesn't f u n c t i o n w h i l e o p e r a t i n g .
Replace the lithium battery with a new
b u t t o n c e l l ( C R 2 0 2 5 ) . M a k e s u r e t h e
battery polarity is correct before
replacing.
Precautions on Using Lithium
Battery
Gently pull out the Battery Holder while
pressing the Stopper.
Put the button-type battery with mark(+)
upward into the Battery Holder.
Replacing the Battery
Insert the Battery Holder into the Remote
Control.
!
Maintenance
Warning
Never use the fuse with the rated
amperage more than that supplied to
your unit, otherwise it will damage the
unit.
Warning!
Improper handling of the battery may
lead to explosion.
It cannot be charged , disassembled or
thrown into a fire.
!
Always keep the lithium battery beyond
children s reach. If s w a l l o w e d , s e e a
doctor immediately.
Clean the battery with a dry cloth,
to ensure it is perfectly connected.
Make sure the polarity is correct w h e n
loading with the battery.
To prevent short circuit, do not use
metal tweezer to clip the battery.
to go back to the
01
7
Before You Start
42
09
Bluetooth
Location of the Controls
To Dial by the Unit
when a cellphone is connected, press to
input the call number, then press
to dial, Dial ok appears, when the call is
pick up, and it appears Pick Up.
23
Note:
* Press CLEAR on the remote control or
in the monitor to delete wrong inputs.
22
Using the Unit as Bluetooth
Music
During bluetooth mode, the music on the
cellphone will switch to the unit for play.
To select music fast: press to play
the previous track, press to play the next
one.
Pause play: press to pause play.
Stop play: press to stop play, and
press the PLAY to play the current track
again.
21
Note:
17
18
30
* Pressing on the unit or performs the
same function.
8
* This function is only valid on the remote control .
The Expanding
The Whole
1
5
4
3
7
8
9
10
12
15
16
17 13
11
2
18
6
Audio Transfer between the Unit
and Phone
Press to change the conversation from
the unit to the cellphone.
Note:
This function will disconnenct bluetooth link
for some phones, but it does not affected the
operation.
6
Audio transfer switches the call from the unit
to the phone for private conversation .
*
*
For some cellphone the audio only can transfer
from the unit to the cellphone, switching from the
phone to the unit is not available.
disconnect the
41
Before You Start
01
8
09
Bluetooth
Cellphone Pairing Mode
1. Browse your cellphone menu and find
the connectivity or Bluetooth connection
section.
2. Select search for a new handsfree device
function and allow the phone to find the
mobile.
(Different cellphone have different blue-
tooth menus, please refer to your phone
manul.)
3. When CAR A/V DEVICE appear, select
this item.
( if it can not be connected, please refer
to mobile manual, and connect it again.)
4. To input the password, the password is:
1234.
5. Press the connect with the Handsfree
option on your cellphone, and
SLC Connect appears.
Bluetooth Connection and
Disconnection
When a bluetooth connection is established
between this unit and the cellphone, bluetooth
icon on the display appears in red.
Press POWER in the monitor to turn off the
bluetooth, and Power OFF appears on the
display.
Press PAIR to turn off bluetooth con-
nection, and appears in green.
Press , Pair Success appears on the
display, then display shows SLC Connect
when bluetooth connected; display shows
Pair Timeout, when bluetooth disconnected.
29
29
Note:
To Dial by Cellphone
1. The unit activates automatically when you
make a call by cellphone, and Dial ok
appears.
2. When you receive a call, Pick Up appears
on the display.
Using the Unit as a Handsfree
Device
When the unit is ringing, then it appears
call from and the phone number ID******
*****on the dialing,
To accept call: Press to answer a call,
it appears Pick Up on the display.
To reject call: Press to reject a call,
it appears Hang Up on the display.
To end call: Press to end call, and
Hang Up appears on the display.
Note:
30
31
Last Number Dialing
Press button, it appears last call
number on , press again, and then
Dial ok appears on the display during
conversation.
Note:
30
4
* Pressing on the unit or performs the
same function.
* To dial the number of the unit in the car
only.
* Pressing on the main unit or in the
monitor also performs the same function.
PAIR
5
* Pressing and on the unit or and
performs the same function.
Some cellphones do not support reject
call during bluetooth mode.
*
Briefly press it to activate the EQ function,
press and hold it to enter bluetooth menu.
EQ/BT(equalizer/bluetooth) Button
12
USB Socket
2
14
Disc Loading Slot
The Base
8
REMOTE Infrared Sensor
9
RES Button
10
A/V IN
13
15
AMS/ Button
In radio mode, press this button to store stations
automatically; in bluetooth mode, press it to
hang up or reject a call.
17
LCD Screen
16
MUTE/ANG Button
Press this button to mute, press and hold it
to open or close the screen.
18
(release the front panel) Button
14
11
/MOD Button
When the unit is off, press this button to turn
on. In working status, briefly press to select
radio mode or playback mode, press and hold
it to turn the unit off.
3
BND/ / (band selector/play, pause/
dial, receive) Button
During radio mode, press it to select the bands;
During playback mode, press it to play or
pause.
During bluetooth, press it to dial and receive
the call..
4
[ / ] ([Adjust frequency backward,
Previous Track / [Adjust frequency forward,
Next Track]) button.
5
MIC ( for bluetooth )
6
Common SD Card Slot
7
VOL/SEL
Rotate (VOL) button clockwise to incr-
ease the volume level; and rotate(VOL)
button counter clockwise to decrease the
volume level. Briefly press it to set the
volume characteristics.
NAVI/ (Navigation/Eject Button)
Briefly press it to enter Navigation system;
press it to eject the disc.
11
Navigation SD Card Slot
* Please keep the phone battery at full power,
or else the bluetooth connection will be disturbed.
* To ensure connection succeed
----Please delete menu of cellphone with blue-
tooth.
----Please reset the unit and cellphone.
----Please reset every step of pairing.
* Disconnect after paring
----Please pair the phone in manual.
For example: pairing fixture cellphone connect.
manual
bluetooth is
bluetooth is
success
01
9
Before You Start
40
Remote Control
Tips:
For more information as to replacing battery, please refer to Replacing the Battery
on page 6.
09
1
2
3
4
5
7
20
6
8
9
10
11
12
13
14
15
16
17
18
19
21
22
23
24
25
26
27
28
31
29
30
Bluetooth
Bluetooth Operational Interface
Press BT on the remote control or BT in
the monitor to open the bluetooth operational
interface:
28
4
Number Show
PAIR
5
6
ACH (audio change)
C (clear)
8
POWER
7
Press it to turn on or turn off the bluetooth function.
1
To input the phone number.
Number Buttons
Using a Bluetooth Wireless
Connection
The device can be dialed wirelessly in bluetoo-
th status. Before using the bluetooth function,
please turn on your cellphone's bluetooth func-
tion.
Pairing Your Unit and Bluetooth
Phone
The device supports handsfree profile,head-
set profile, A2DP( Audio Advanced Distri-
bution Profile)and AVRCP(Audio Video
Remote Control profile). Follow the pairing
instructions for the first time use, after that
the unit will connect automatically.
Note:
* To provide the best sound with minimal
distorted sound(the cellphone or network
brings).
* Full duplex conversation.
* Bluetooth ver2.0 compliant.
Pairing in Handsfree Mode
1. Press PAIR, and Pairing... shows on
the screen.
2. To get into CELLPHONE CONNECTION
to search fixtures;
3. If the cellphone has connected, Pair
Success appear and then SLC Connect
in order, will change from green to red.
29
Note:
* Pressing on the main unit or in the
monitor also performs the same function.
PAIR
5
2
Dial, last call, answer a c a l l .
3
Hang up, refuse a call.
9
P r e s s t h i s b u t t o n t o g o b a c k t o t h e s e l e c t
m e n u .
10
Pairing success this button is in red,
or it is in green.
AUDIO setup menu
To adjust AUDIO please refer to pages 19.
11
12
P r e s s t h i s b u t t o n t o m u t e .
You can adjust the volume by
gliding this strip horizontally.
13
Press this button to lock or unlock
the touch screen
During unlock status, glide up and down or
left and right on the blank space of screen
to switch to the previous or next mode.
14
44
88
77
66
10
11 12 13
149
5
23
39
Before You Start
10
01
1
SOURCE/PWR
4
AMS/MENU
3
BAND/TITLE
5
LOC/SUB -T
6
ST/AUDIO (mono or stereo/language or
channel selector)
8
OSD
Slow Forward/Reward)
7
ANGLE
13
PROG(Program playing)
12
Mute
P/N( system adjusting)
9
ZOOM (zoom in or zoom out)
2
GOTO (playing time/track)
RPT(Repeat Playing)
15
RDM (Playing Tracks at Random)
16
VOL+/VOL-/SEL
14
Press it to show the current information.
30
25
LOUD (loudness)
SETUP
19
(F.R/F.F)
20
CLEAR
22
0~9 (Number) Buttons
23
(Eject Button)
24
18
(Stop Playing)
17
(Pause/Play)
EQ (equalizer) Button
26
21
(Previous/Next Track)
ENTER
27
(Left/Right/Up/Down
ENTER)
28
BT (bluetooth mode) Button
29
PAIR/VIDEO
During bluetooth mode, press it to pair.
30
31
During bluetooth mode, press to dial, re-dial
or answer a phone.
During IPOD mode, press it to go back to the
previous mode.
During bluetooth mode, press to hang up or
refuse a phone.
During IPOD mode, press it to back to the
root catalog.
08
/BACK
/ROOT
Press SRC to turn to AUX 1 or press
icon in the select menu to appear as follows:
AUX Touch Screen Menu
To adjust AUDIO please refer to pages 19.
Press SRC in the monitor to turn to AUX 2:
Press icon in the monitor of AUX 1 or
AUX 2 to enter the menu as follows:
To adjust VIDEO please refer to pages 20.
Press icon in the monitor of AUX 1 or
AUX 2 to show menu as follows:
Press this button to mute.
You can adjust the volume by
gliding this strip horizontally.
Press this button to lock or unlock
the touch screen
During unlock status, glide up and down or left
and right on the blank space of screen to switch
to the previous or next mode.
Press this button to go back to the select menu.
AUX
AU X1AU X1
AU X1AU X1
menu.
01
11
Before You Start
38
AM Tuner Section
VCD/CD Player Section
530-1710 (KHz)
(U.S.A.)
VCD Signal System
AUTO/PAL/NTSC
General
FM Section
87.5-108(MHz)
(Europe)
87.5-107.9(MHz)
(U.S.A.)
10.7MHz
10dBuV
50dB
30dB 1KHz
40 -12KHzHz
Note:
Due to continuous product improve-
ment, specifications and design are
subject to change without prior notice.
Specifications
Power Requirement
14.4V DC
(11-16V allowable)
Load Impedance
7dB
Bass 100Hz
Treble 10KHz
Tone Controls
Approx.197x178 x 50
mm
(d/w/h)
Dimensions
Approx.1.76kgWeight
Tuning Range
IF Range
Usable Sensitivity
(-30dB)
Signal-to-noise Ratio
Stereo Separation
Frequency Response
450KHz
IF Range
32dBuVUsable Sensitivity
(-20dB)
60dB
Signal-to-noise Ratio
55dB(1KHz)Separation
0.3%
Distortion
Max.Power Output
45W x 4
522-1620(KHz)
(Europe)
Frequency Range
(Optional)
(Optional)
DVD Player Section
DVD Signal System
AUTO/PAL/NTSC
60dB
Signal-to-noise Ratio
60dBSeparation
2
Channels
40Hz to 16KHz
Frequency Response
07
Tuner
Number Buttons
During radio mode, Number Buttons
(from 1 to 6) can help you yo-
ur favorite station. You can follow the
as below:
store
steps
Press and hold AMS button to receive
stations automatically, and store them in
1 to 6 number respectively.
23
During radio mode, press Number Buttons
to receive the stored stations.
4
When receiving a station,press and hold
any one of the Number Buttons
(from 1 to 6) until the number app-
ears on the LCD, which indicates that
station is already stored in the corresp-
onding number button.
Press and hold another number button
for more than 2 seconds while listening
to a station on another number, the
station will be stored in that number
button.
1
2
3
Pressing in the monitor performs the same
function.
Note:
*
5
Scanning/Memorizing Stations
Automatically
During radio mode, briefly press AMS
button on the remote control to scan each
stored seconds respectively wh-
ich Number Buttons (from 1
to . You can press responding N-
umber Buttons or ton when your
desired station is And it starts pl-
aying that station.
station 6
stored in
6) the cor
AMS but
charged.
23
4
When press and hold AMS ,
automatically memory storing
The radio will automatically activate
the memory storing function in any one of
Number Buttons (from1 to 6).
button it
will activate
function.
the
Note:
* The unit can store up to 6 stations for
each band.
* Pressing in the monitor performs the
same function.
4
23
10
Goto FREQ
2
Press GOTO, and the monitor shows:
FREQ, then press the Number to input the
valid frequency, then the TV program will
be played.
Note:
*
It is only valid on the remote control.
*
LOC ON appears on the display and only
local station is available. When it disappears
both distance and local stations can be
received.
DX/LOC Selector
During radio status, press LOC button
to select or weak station reception.strong
5
The function is only valid on the remote control.
The function is invalid in AM tuning.
Note:
*
*
During radio status, you can press ST
button on the remote control MONO
mode or STEREO
to select
mode.
Stereo reception is charged when STEREO
appears.
It is switched to MONO mode when MONO
appears.
MO/ST Selector
It is only valid on the remote control.
It is only valid in FM tuning.
6
Switch to MONO compulsively to improve
the listening quality when weak signal.
Note:
*
*
*
Press and hold
the automatic
station, press
37
Installation
02
12
07
Tuner
The brown wire is connected with brake signal; for safety, the programs can be seen on the monitor
after braking the car, but the menu and RCA output are free of it.
If you do not want to use this function, connect it with the negative pole.
Do not connect the pink wire to the battery,otherwise it will use up the power of battery.
Note:
*
Listening to the radio
Band Indicator
Shows which band the radio is tuned
to.
1
Preset Number Indicator
Shows what preset has been selected.
2
Shows which frequency the tuner is
tuned.
Frequency Indicator
3
6
TIME SHOW
To show the current time.
5
The 6 stations of the current band.
Briefly press to select station, hold and
press to save the current station to one
of the 6 stations.
Press this button to lock or unlock
the touch screen
During unlock status, glide up and down
or left and right on the blank space of
screen to switch to the previous or next
mode.
4
7
BACK
Press it to go back to the select menu.
8
Press it to adjust the volume.
9
Press this button to search the frequency
manually. Press and hold it to search
the station automatically.
10
AMS
Press it to scan the current station each
5 seconds, press and hold it to search
and store the stations automatically.
11
12
13
SETUP MENU
Press it to enter the main setup menu.
RDS MENU
Press this button to enter the RDS setup
menu.(Without RDS function, the icon is
in gray.)
BAND
Press this button to select bands.
Note:
* Pressing BND on the main unit or in the
monitor performs the same function.
During radio status, repeatedly press
BAND button to select bands in
lowing order:
the
fol
Band Selector
3
(For Two Bands)
13
1
FM2
MW2
MW
FM3
F
M
1
FM4
OIRT
Selecting the Stored Station
During radio status, press button to
select the stored station upward, press to
select downward.the stored station
27
Note:
*
Pressing in the monitor also performs the
same function.
5
2 3 47
5
6
9 1012138 11
:
FM 1
:
FM 1
:
CH 3
:
CH 3
98.00MHz98.00MHz
Wiring Connection
Video Out 1
Rear RCA
Front RCA
Reverse Video
Input
(Light grey line with
yellow head)
(Light Grey line with
red & white head)
(Dark Grey line with
red & white head)
(Brown line with
yellow head)
Video Out 2
(Light grey line with
yellow head)
Subwoofer
(Brown line with
brown head)
1
Reverse Gear
Orange
Red
Yellow
Black
Ignition Key
Battery +
Ground
Rear L
Speaker
Front L
Speaker
Green/Black
Green
White/Black
White
Brown
Pink(optional)
Violet/Black
Blue
Violet
Grey/Black
Grey
Parking Brake
Lamp In
Antenna
Power +
Rear R
Speaker
Front R
Speaker
41
2
5
Output Plug(Male)
3
Output Socket(Female)
FILTER
&FUSE
BOX
Fan Window
AUX Audio input
(Black line with red
& white head)
AUX Video input
(Black line with
yellow head)
Ipod Wire Conection
(White)(+5V)
3
4
2
5
GPS Antenna Receptacle
Radio Antenna Receptacle
Manual/Automatic Tuning
Manual Tuning: Briefly press (
button on the remote control to select the
different band.
or )
Automatic Tuning: ressing and
) button the radio will
stations or respectively
and plays when it finds a station.
P holding
( or on automatically
search downward upward
Pressing in the monitor or /
on the main unit also performs the same
function.
Note:
*
9
02
13
Installation
36
06
Install the Front Panel
Put notch (shown as picture) onto shaft
.And then slightly press into the right side.
B
A
Detach the Front Panel
Press button in the upper rightcorner,
and then the front panel will be folded down.
* Pressing in the monitor or on the main
unit performs the same function.
Pause Playback
During CD/MP3/SD/USB playback, Press
to switch between play and pause.
Note:
Press ( or ) on the remote control to
perform fast rewind or fast forward.
Skip backward/forward/F.F
/F.REW the playback
20
2 X 4 X 8 X 16X
Note:
During CD status, press OSD button. The
display shows:
Single elapsed
Total
elapsed
Total
remain
Single remain
Note:
* This function is operated by using the remote
control.
On Screen Display
Slow motion playback
During MP3/SD/USB mode, press
to slow forward. There are speeds as follows:
10
Note:
1/8
* This function is operated by using the remote
control.
Program Playing
During CD mode, press PROG, the TFT
displays the program menu. Press NUMBER
BUTTONS to select the track Number and
then press to move the cursor to START,
press ENTER to start program playing;
move the cursor to EXIT and press ENTER
to exit the program playing. Move the cursor
to and press ENTER to the previous page;
move the cursor to and press ENTER to
the next page. During this process, press
to cancel the program playing.
13
18
The function is only valid on the remote control.
Note:
*
27
* Press CLEAR to clear the mistake input.
22
8
Eject SD Card
Push SD card to eject it.
During SD playing mode, eject SD card to
switch to Disc mode; If there is no disc in
the main unit, it will USB mode,
or else, it will switch to Radio mode.
During other modes, ejecting the SD card
will keep the previous mode.
switch to
Eject USB
Pull USB to eject it.
During USB playing mode, eject USB to
switch to Disc mode; If there is no disc in
the main unit, it will SD Card mode,
or else, it will switch to Radio mode.
During other modes, ejecting the USB will keep
the previous mode.
switch to
* This function is operated by using the remote
control.
CD/MP3/SD/USB
A
B
The s peeds are
35
Installation
14
02
Install the Unit
Bracket supplied
to your car
Dashboard
or Console
Select a position where the screw holes of
the mounting bracket lied with the car and
the of the main unit
fitted), and at 2
places on each fasten them to
the car.
supp
screw holes become aligned
(are tighten the screws (see
side). And then
4
Note:
Outer Trim Frame Mounting Sleeve
are not used
and
for installation method.
Installation Method
Installation using the screw holes at
sides of the unit.the
5
1
06
CD/MP3/SD/USB
1
5
4
Bend these claws
outward for a tight fit,
if necessary.
To support the unit
Fire Wall
Selecting Tracks Fast
1
2
3
4
5
1
1
2
1
During MP3/SD/USB playback, press
to play the previous track, press to play
next track.
During CD playback, first press to
return to the beginning of the current track,
press again within 3 seconds to play
previous track , press to play next track .
21
21
21
21
Repeat Playing
During CD/MP3/SD/USB playback , press
replay the current track, press
it again to cancel this function.
RPT to
15
* This function is operated by using the remote
control.
Note:
* The default setting is Disc Repeat.
* Press CLEAR to clear an mistake .input
22
Number Buttons
Press one of Number Buttons(0~9) to
select a track to play automatically.
23
* Pressing track region and the screen shows the
number keys, touch the number to select tracks.
Note:
Note:
* Pressing - / + button on the main unit
or and in the monitor also performs
the same function.
* In CD/MP3/SD/USB mode, you can press
track s Number or name in the monitor to play.
4
Selecting Track
2
* This function is operated by using the remote
control.
Note:
* Press CLEAR to clear .an input mistake
22
During CD playback, first press GOTO,
the TFT shows : disc go to:--:--,press your
desired time of the playback by using num-
ber buttons.
Second press GOTO button, track go to:--:--
appears on TFT, also input your desired
numbers to play the current time of your
selection.
During MP3/SD/USB mode, first press
GOTO and the TFT shows:---. Then press
NUMBER BUTTONS to input the MP3/SD
track s Number to play it; secondly press
GOTO button, and the TFT shows : --:--,
now input the desired time to play the
current track at this point.
2
Stop Play
During CD/MP3/SD/USB playback, Press
to stop the playback.
18
* Pressing in the monitor performs the same
function.
Note:
Playing Tracks at Random
During CD/MP3/SD/USB playback,
RDM button on the remote control to
play random under the directory
which you select. P return to
press
any track at
ress it again to
normal playing.
16
* This function is operated by using the remote
control.
Note:
21
02
1534
Installation
06
CD/MP3/SD/USB
Detach the Unit
2
3
4
6
M4x3 &M5x5
7
Main Parts List
Mounting Sleeve x1
Rear Mounting Bolt x1
Harness Rubber x1
4 Screws Each
Outer Trim Frame x 1
Connecting Wire x1
Steel Bar x 1
8
Key x 2
1.Take out the Outer Trim Frame after
detaching the front panel.
Detach the front panel before disassembl-
ing the unit. F
efer to the Front
Panel .
or more details regarding
this section, r Detach
2.Insert the keys supplied to the unit at
both sides of the unit (shown as illustrat-
ed) until they click. Pulling the keys
makes it possible to remove the unit from
the dashboard.
During CD playback, touching the screen
shows the following menu:
CD/MP3/SD/USB Setup
Track region
During MP3/SD/USB playback, touching
the screen shows the following menu:
Track region
Scan the tracks
CARDCARD
The CARD appearing is in the SD Card
mode, the USB appearing is in the USB
mode.
Play/pause
Stop
Previous track
Next track
DVD setup menu
MODE
Mode selector
CD/MP3/SD/USB Play
Insert a CD/MP3 disc into the slot, the unit
will play automatically.
Take away the rubber plug USB or SD
card, then insert USB or SD card which
will be played automatically.
If there have be loaded a disc/USB/SD card,
press SOURCE to switch to play, or back
to play source to select menu, press DVD
to play.
Note:
*
12
6
Press /MOD on the main unit to switch to
DVD mode. When SD card and USB were
inserted into, press this key again and again to
switch among SD card, USB and disc.
*
Press in the monitor to turn to mode switch.
MODE
Track Region:
Press this region and the screen
shows the following menu:
number keys appears, touch the
number to select tracks.
Touch the " X " to exit this menu.
01:18
CD
01 Track
02
CD
CD
CD
CD
CD
CD
Track 03/16
00:00
001/105
00:00
MP 3
MP3
MP3
MP3
MP3
MP3
MP3
Demo
amour
Au tom a tic
Be natural_s_e
Can you c e l e b r
clon_bing bing
00:00
001/105
00:00
MP 3
MP3
MP3
MP3
MP3
MP3
MP3
Demo
amour
Au tom a tic
Be natural_s_e
Can you c e l e b r
clon_bing bing
1
2
3
4
5
6
7
8
9
--
0
X
*
1
5
When a disc, an SD card or a USB device is
loading, pressing the upper left corner of the
screen reveals the ,
and then press button to select the corresp-
onding media icon to play.
*
At present, our products can only support up
to 16G of SD or USB.
a disc/USB/SD card has been
loaded,
33
16
02
05
Installation
Cleaning the Connector
If the connector between the main unit and the
front panel is dirty, it may result in unit s ab-
normal working condition. To avoid such pro-
blems happening, please detach the front panel,
and clean the connector with an swab.
Gently clean and avoid damaging the connector.
alcohol
* For safekeeping, always shut down the engine
and remove the key ignition before cle-
aning.
Never allow your finger or any metal
touch the connector directly.
from the
device to
Notes:
The main unit
The backside of the front panel
Parental
Example showing how to set parental control:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go to language page
Set parental control
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
Change PSW
Example showing how to set password, and the default pas sword is 8888.
(Press , or , then press ENTER)
(Press
--Preference Page--
Go to language page
Change the password
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
Change
2
3
4
5
6
7
8
Off
G
PG
PG 13
PGR
R
NC 17
Adult
---Preferences page--
Default
Example showing how to set load factory setting:
(Press , or , then press ENTER)
(Press
--Preference P a g e - -
Go to language page
Reset to the factory settings
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference P a g e - -
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
Reset
DVD/VCD/MP4
03
1732
Common Operations
05
DVD/VCD/MP4
Reset the Unit
Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.
Note:
* When ome errors occur on the
also press RES
it will
s display, you can
button to resume to normal,
and erase the clock setting and some me-
morized functions.
* This function can only be operated by the
main unit.
Release the front panel at first, and then
Press RES button in the panel w
object, (such as a ball
the unit to initial status.
ith
a pointed point pen)
to set
9
Press VOL+ button to increase sou-
nd level and press VOL- button to decr-
ease sound level.
the
the
Volume Control
* Pressing on the main unit also performs the
same function.
14
14
Note:
7
Turning the Unit On/Off
Briefly press PWR button to turn on the
unit, press and hold to turn off.
1
* Pressing /MOD button on the main unit also
performs the same function.
Note:
To Select Source by Menu
In any mode(except for DVD, SD, USB
mode), press in the monitor, the
following menu will appear:
You can skim through the items by gliding
horizontally
If you want to , press NAVI ;
if it did not enter into, that means the unit
does not include the function or the GPS
Card is not inside..
in the blank space of screen,
select your desired item to enter
navigate
* If the font display is in gray, that means this
function is null.
Note:
Setting the Sound Characteristics
press SEL button to
select the mode in the following
order:
Quickly and briefly
desired
* Briefly pressing button on the unit
also performs the same function.
main
14
After selecting the desired mode, you
adjust the current level by pressing
.
can
VOL
buttons
Note:
7
14
* Pressing +/- or / , / on the screen
also adjust the current state.
TREBLE
BALANCE
BASS
VOLUME
FAD
SUBWOOFER
Press and hold ANG on the main unit to
open the display before putting a disc inside.
Do it again to go back to the normal position.
Open the Display
* This function is only performed by the main
unit.
Note:
16
Audio
Example showing how to set Audio language:
(Press , or , then press ENTER)
(Press
--Preference P a g e - -
Go to language page
Set the audio Language
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference P a g e - -
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
Subtitles
Example showing how to set subtitle language:
(Press , or , then press ENTER)
(Press
--Preference P a g e - -
Go to language page
Set the subtitles Language
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference P a g e - -
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
---Preferences page--
DVD Menu
Example showing how to set Disc Menu Language:
(Press , or , then press ENTER)
(Press
--Preference P a g e - -
Go to language page
Set the DVD menu langua ge
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference P a g e - -
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
English
French
Spanish
Chinese
Japanese
Korean
Russian
Others
English
French
Spanish
Chinese
Japanese
Korean
Russian
Others
English
French
Spanish
Chinese
Japanese
Korean
Russian
Others
.
31
18
03
05
DVD/VCD/MP4
Common Operations
Mode Selector
* Briefly pressing MOD on the main unit also
performs the same function.
Note:
Quickly and briefly press SOURCE
button to select the different modes available.
1
Receptor on the main unit for the card
remote commander.
Infrared Sensor
8
Press button to shut off sound
output. And appears on the LCD.
Press it again to resume to previous volume
level.
the
Mute Function
Pressing MUTE on the main unit also performs
the same function.
12
Note:
*
EQ Setting
Repeatedly pressing button to choose
the following modes turn:
EQ
in
While listening to popular music, classic
music or rock music, you select the co-
rresponding preset modes to adjust the sou-
nd quality ing EQ button.
can
perfectly by us
3
Note:
26
The default setting is OFF.
26
ROCK
CLASS
POP
OFF
* Pressing EQ on the main unit also performs
the same function.
Turning Loudness On/Off
Press activate loud func-
tion. You can this button to increase
the low quency, which can improve sen-
si ty for ears. Pressing it again to
quit this function.
LOUD button to
press
fre
tivi your
25
Note:
Insert an SD Card
Common SD Card: insert a common SD
card into SD slot and the programs in
the card will be played.
6
Eject a Disc
Press button to eject or insert a disc.
Note:
* Pressing on the main unit also performs
the same function.
24
* Pressing LOU on the main unit also performs
the same function.
--Dual mono/DRC S e t u p - -
Dual Mono
Example showing how to set stereo mode:
(Press
(Press , or , then press ENTER)
--Dual mono/DRC Setup--
Dual Mono
Dynamic
Dual mono/DRC setup
Dual Mono
Dynamic
Dual Mono Setup
Stereo
L-Mono
R-Mono
Mix-Mono
Dynamic
Example showing how to set dynamic range compression:
(Press
(Press , or , then press ENTER)
Dual Mono
Dynamic
Dual mono/DRC setup
Dynamic
Deactivate DRC
1 4
1 2
3 4
Dual Mono
--Dual mono/DRC Setup--
--Dual mono/DRC Setup----Dual mono/DRC Setup--
---Preference page---
TV Type
Example showing how to set TV type:
(Press , or , then press ENTER)
(Press
--Preference P a g e - -
Go to language page
Select the TV system
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
--Preference P a g e - -
TV Type
Audio
Subtitles
DVD Menu
Parental
Change PSW
Default
Auto
Eng
Eng
Eng
PAL
NTSC
Auto
Except for navigation, press and hold
SEL/NAVI to activate the double function,
it means that the current radio or playing is
on, press to switch to navigation status.
Press and hold it again to quit this function,
go back to the previous status.
Double Function
11
11
04
19
Main Menu
30
19
05
DVD/VCD/MP4
Set up Main Menu
Press the icon on the menu, the monitor
will display the main menu as follows:
You can touch a choice directly on the screen,
including VIDEO, SYSTEM, SAVE,
RESET.
You can slide up and down to select the desired
option indicated by the white arrow. This
operation is the same in other menus.
AUDIO,
1.Audio Adjust
After selecting AUDIO, the sub menu will
appear as follows:
You can adjust VOLUME, BALANCE, FADE,
BASS, TREBLE, For
example, press
SUBWOOFER
TREBLE, the settings menu
will appear as follows:
Press and or press the long strip
to adjust the size, then press SAVE
to save the setup, press RESET to go back to the
default value.
on
the screen
Note:
* Adjusting other options perform the same
operation.
* Pressing VOL+/VOL- on the remote or press
EN+/EN- button on the main unit also performs
the same function.
--General Setup P a g e - -
Captions
Example showing how to set captions on/off:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To G e n e r a l S e t u p P a g e
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Closed Captions
Off
On
Screen Saver
Example showing how to set Screen Saver on/off:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To G e n e r a l S e t u p P a g e
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Set the Screen Saver
On
Off
29
Main Menu
04
20
05
DVD/VCD/MP4
2.Video Adjust
After selecting VIDEO, the sub menu will
appear as follows:
In this menu you can adjust BRIGHT, SHARP,
CONTRAST, SAT-U, SAT-V and HUE.
Contrast Adjust
Press CONTRAST in this menu, it will
appear as follows:
Press and or press the long strip
to adjust the size, then press SAVE
to save the setup, press RESET to go back to
the default value.
on
the screen
Note:
* Adjusting other options perform the same
operation.
* Pressing VOL+/VOL- on the remote or press
EN+/EN- button on the main unit also performs
the same function.
* The HUE item in CONTRAST is only valid
in the NTSC system.
3.System Adjust
After selecting SYSTEM, the sub menu will
appear as follows:
In this menu you can adjust ANGLE CTRL,
LAMP CTRL, SCREEN ADJ, KEY BEEP,
MONI FLEX REVER POLA
SUBWOOFER AMS FULLUP LOCAL
AREA LOCAL GOTO FREQ CLOCK
SYS CLOCK ADJ VERSION.
Angle Control
Press ANGLE CTRL in this menu, it will
appear as follows, you can adjust your
desired angle::
Press and or press the long strip
to adjust the angle, then press
SAVE to save the setup, press RESET to go back
to the default value.
on
the screen
Note:
* Do not use force to adjust the angle of display.
--General Setup P a g e - -
TV Display
Example showing how to set TV Display mode:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To G e n e r a l S e t u p P a g e
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Set the TV shape
Normal/PS4/3
Normal/LB4/3
Wide16:9
Angle Mark
Example showing how to set picture mode:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To G e n e r a l S e t u p P a g e
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Set the multi-angle display
On
Off
OSD Lang
Example showing how to set language mode:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To G e n e r a l S e t u p P a g e
--General Setup Page--
TV shape
Angle Mark
OSD Language
Captions
Screen Saver
Wide
On
Eng
Off
On
Set the OSD Language
English
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Ematic dp745nav Owner's manual
- Category
- Car media receivers
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
