Epson Pro L20000U Operating instructions

Category
Projectors
Type
Operating instructions
Epson Projector Professional Tool
Operation Guide
3
Contents
Introduction to the Epson Projector Professional Tool Software ........................................................... 5
Epson Projector Professional Tool Features ........................................................................................ 5
Projector Panel Feature................................................................................................................... 6
Lens Control Feature....................................................................................................................... 6
Geometry Correction Feature.......................................................................................................... 6
Edge Blending and Color Uniformity Features................................................................................. 7
Tiling Assist Feature ........................................................................................................................ 7
Screen Matching Feature ................................................................................................................ 8
Color Calibration Feature ................................................................................................................ 8
Projector Operations or Settings...................................................................................................... 9
Apply Settings to Multiple Projectors Simultaneously ...................................................................... 9
Monitoring Feature .......................................................................................................................... 9
Setting Up the Software for the First Time .............................................................................................. 10
Installing the Software ........................................................................................................................ 10
System Requirements ................................................................................................................... 10
Installing the Epson Projector Professional Tool Software (Windows/Mac)................................... 11
Creating and Adjusting Projector Projects ............................................................................................. 13
Creating a Project............................................................................................................................... 13
Adding a Projector to a Project........................................................................................................... 15
Adjusting the Layout of the Projector Panel........................................................................................ 18
Adjusting Projected Images ..................................................................................................................... 20
Projector Adjustment Options on the Software Screen ...................................................................... 20
Screen Summary ............................................................................................................................... 22
Lens Control .................................................................................................................................. 22
Initial Setting.................................................................................................................................. 23
Edge Blending ............................................................................................................................... 26
Geometry Correction ..................................................................................................................... 27
Image ............................................................................................................................................ 30
Black Level .................................................................................................................................... 33
Scale ............................................................................................................................................. 34
4
Blanking......................................................................................................................................... 35
Adjusting the Screen with the Tiling Assist Feature............................................................................ 35
Operating Conditions for the Tiling Assist Wizard.......................................................................... 41
Solving Tiling Assist Problems....................................................................................................... 41
Monitoring Projectors ............................................................................................................................... 43
Projector Monitoring Views................................................................................................................. 43
Appendix .................................................................................................................................................... 45
Updating and Uninstalling the Software ............................................................................................. 45
Getting the Latest Version of the Software .................................................................................... 45
Uninstalling the Epson Projector Professional Tool Software (Windows 7) ................................... 45
Uninstalling the Epson Projector Professional Tool Software (Windows 8.x/Windows 10) ............ 46
Uninstalling the Epson Projector Professional Tool Software (Mac).............................................. 46
Notices ............................................................................................................................................... 46
Copyright Notice............................................................................................................................ 47
About Notations............................................................................................................................. 47
General Notice............................................................................................................................... 48
Copyright Attribution...................................................................................................................... 48
5
Introduction to the Epson Projector Professional Tool
Software
See the information here to learn more about the Epson Projector Professional Tool software.
Epson Projector Professional Tool Features
Epson Projector Professional Tool Features
The Epson Projector Professional Tool software allows you to adjust and control images projected from
network projectors, and monitor the status of the projectors using your computer.
Note: Depending on the firmware version, you may encounter some limitations when using this
software.
Projector Panel Feature
Lens Control Feature
Geometry Correction Feature
Edge Blending and Color Uniformity Features
Tiling Assist Feature
Screen Matching Feature
Color Calibration Feature
Projector Operations or Settings
Apply Settings to Multiple Projectors Simultaneously
Monitoring Feature
Parent topic: Introduction to the Epson Projector Professional Tool Software
6
Projector Panel Feature
You can visually select the projector you want to adjust and control on your computer screen by
arranging the projector panel according to the actual projected image.
Parent topic: Epson Projector Professional Tool Features
Lens Control Feature
You can adjust the focus or the position of the lens installed on the projector.
Parent topic: Epson Projector Professional Tool Features
Geometry Correction Feature
You can correct image distortion when projecting on a curved or right-angled screen using the
Geometry Correction feature. You can also undo and redo the adjustment.
7
You can also export the current Correction Type setting value to a file and import it to another projector.
Parent topic: Epson Projector Professional Tool Features
Edge Blending and Color Uniformity Features
You can create a single seamless image from multiple projectors using the Edge Blending feature, and
you can reduce color tone differences between images using the Color Uniformity feature.
Parent topic: Epson Projector Professional Tool Features
Tiling Assist Feature
You can easily and quickly create a single seamless image from multiple projectors when projecting on a
flat screen using the Tiling Assist wizard (supported models only).
You first select an Edge Blending value and adjust the size and position of your projected image. Then
the projector automatically calibrates the image to correct any distortion.
8
You can then manually adjust the outline of the projected image and correct any other settings as
needed for a seamless result.
Parent topic: Epson Projector Professional Tool Features
Screen Matching Feature
You can correct differences in the tint and brightness between projectors to optimize the display quality
of the combined image.
Parent topic: Epson Projector Professional Tool Features
Color Calibration Feature
The Epson Projector Professional Tool software automatically adjusts the color tone of the entire screen
based on the default color settings. This compensates for deterioration in color tone over time.
Parent topic: Epson Projector Professional Tool Features
9
Projector Operations or Settings
You can control the basic projector operations such as turning the power on or off, and displaying a Test
Pattern from your computer screen.
You can also select projector settings necessary for the projector installation.
Parent topic: Epson Projector Professional Tool Features
Apply Settings to Multiple Projectors Simultaneously
You can apply the following settings to multiple projectors:
Power/Source
Shutter
On-Screen
Test Pattern
All features in the Initial Setting tab
All features in the Edge Blending tab
All features in the Image tab
Parent topic: Epson Projector Professional Tool Features
Monitoring Feature
You can visually check the status of one or more projectors, such as the power, current input source, or
other projector status information. This lets you monitor projector operations and receive alerts should
any errors or warnings occur.
Parent topic: Epson Projector Professional Tool Features
10
Setting Up the Software for the First Time
Follow these instructions before connecting a computer to the projector over a network.
Installing the Software
Installing the Software
Check the system requirements necessary to run the software, and then install the software.
Note: Depending on your projector's firmware version, you may see this message.
* This version of firmware does not support all of the features in this software version. Please see
the user’s manual for details.
Upgrading your firmware to the latest version may enable you to use all the functions of this software.
See the sections in this guide covering software functions and their limitations.
System Requirements
Installing the Epson Projector Professional Tool Software (Windows/Mac)
Parent topic: Setting Up the Software for the First Time
System Requirements
Your computer must meet the following system requirements to use the Epson Projector Professional
Tool software.
Requirement Windows Mac
Operating system Windows 7
Ultimate (32- and 64-bit)
Enterprise (32- and 64-bit)
Professional (32- and 64-bit)
Home Premium (32- and 64-bit)
Home Basic (32-bit)
macOS
10.12.x (64-bit)
10.13.x (64-bit)
10.14.x (64-bit)
11
Requirement Windows Mac
Windows 8.1
Windows 8.1 (32- and 64-bit)
Windows 8.1 Pro (32- and 64-bit)
Windows 8.1 Enterprise (32- and
64-bit)
Windows 10
Windows 10 Home (32- and 64-
bit)
Windows 10 Pro (32- and 64-bit)
Windows 10 Enterprise (32- and
64-bit)
CPU Intel Core2Duo 1.2GHz or faster
(Intel Core i3 or faster
recommended)
Intel Core2Duo 1.2GHz or faster
(Intel Core i5 or faster recommended)
Memory 1GB or more
(2GB or more recommended)
2GB or more
(4GB or more recommended)
Display Resolution between 1280 × 768 and 1920 × 1080
Parent topic: Installing the Software
Installing the Epson Projector Professional Tool Software (Windows/Mac)
Download and install the Epson Projector Professional Tool software on your computer.
Visit epson.com/support (U.S.) or epson.ca/support (Canada) and select your projector to download the
latest version of Epson Projector Professional Tool.
Note:
You need administrator authority to install the Epson Projector Professional Tool software (Windows).
1. Download the latest version of the Epson Projector Professional Tool software.
2. Follow the on-screen instructions.
12
Parent topic: Installing the Software
13
Creating and Adjusting Projector Projects
Follow these instructions to create a projector project, register projectors to the project, and adjust the
image layout.
Creating a Project
Adding a Projector to a Project
Adjusting the Layout of the Projector Panel
Creating a Project
You can save projector connection information and the layout of the projected image as a project.
Creating separate projects allows you to save projector settings depending on the installation
environment.
When you start the Epson Projector Professional Tool software, the following screen is displayed.
Select New Project to create a new project to register projectors you want to control.
Select Open Project to open the previously created project.
Select a previously created project from the Recently Used Project list.
Attention:
If you change your computer's network adapter settings before starting the Epson Projector
Professional Tool software, the software may not start. Restart your computer first.
14
If the MAC address is changed after creating a project, an unintended projector may be read in the
project.
Note: To change the language or color theme for the software, select in the upper right corner and
select the Option setting.
When you create a project, the software automatically searches for network projectors on the same
subnet and displays up to 50 detected projectors as panels and a list on the Layout/Monitoring tab.
Each projector panel or the projector list on the bottom contains the following information:
Projector name
IP address
Model name
System error
Shutter status
Projector status
Intake air temperature
Internal temperature level
Input source
• Signal/frequency
15
AC voltage (supported models only)
Note:
Depending on the software setting, the information displayed on the projector panel may vary.
The information displayed on the projector panel or projector list updates automatically at an interval
you set. To change the interval, select in the upper right corner and select the Option setting. You
can select an interval time from 5 to 60 seconds.
If the detected projector is using an older version of the firmware, the following message is displayed.
* This version of firmware does not support all of the features in this software version. Please
see the user’s manual for details.
Parent topic: Creating and Adjusting Projector Projects
Adding a Projector to a Project
Select the projector panel you want to add to the project and select the following buttons as necessary.
Note: You can select multiple projectors in the following ways:
Select multiple projector panels by dragging them on your computer screen.
Select each projector panel by pressing the Ctrl (command) + Enter keys, or the Ctrl (command) key +
the spacebar on the keyboard. (You can select and deselect a projector panel by pressing the Enter
key or the spacebar each time.)
16
You can zoom in or zoom out the projector panels by pressing the + or - keys, or the Ctrl (command)
key + mouse wheel.
1 Switches the view between one for arranging the projector panel and
another for monitoring the projectors.
2 Locks/unlocks the layout of the projector panels.
3Edit Group Sets up projectors in a group so you can control them simultaneously.
Group: Creates a group of the projectors you selected.
Ungroup: Removes the group of the projector you selected.
Rename Group: Lets you edit the name of the projector group.
4Save Saves the projector information and the layout of the projector panel to the
project file.
5Add Projector Adds a projector manually by specifying the projector's IP address.
6Auto Search Searches for network projectors on the same subnet.
7Refresh Updates the projector information.
17
8Edit Adjusts the projector's settings.
Rename Projector: Lets you edit the name of the selected projector.
Remove: Deletes the projector from the project.
Authentication: Performs authentication manually when the projector
status is Not Authenticated. If you set the same password for multiple
projectors, you can perform authentication for multiple projectors at one
time by selecting multiple projector panels before selecting this button. If
you set the default Web Control password for the projector, the projector
is automatically authenticated.
Set Panel Items: Lets you select the information which is displayed on
the projector panel.
9Project Projector
Info
Projects the IP address and the name of the projector you selected.
10 Opens the menu to control the projector power, input source, and shutter
settings.
Parent topic: Creating and Adjusting Projector Projects
18
Adjusting the Layout of the Projector Panel
You can adjust the layout of the projector panel by dragging and dropping the individual projector panels
on your computer screens according to the actual projected image. When you select multiple projector
panels, you can move them at one time.
When you have finished making adjustments of the layout, select the Save button to save the project.
Note: When you need to group projectors so you can control Screen Matching or use Tiling Assist,
make sure you arrange the panels under the following conditions:
All the projectors must support Screen Matching or Tiling Assist.
There are no gaps between the panels.
19
The shape of the selected panels forms a rectangle.
Parent topic: Creating and Adjusting Projector Projects
20
Adjusting Projected Images
See the following sections to select and adjust individual projector settings on the Epson Projector
Professional Tool Setting tab.
Projector Adjustment Options on the Software Screen
Screen Summary
Adjusting the Screen with the Tiling Assist Feature
Projector Adjustment Options on the Software Screen
When you select the Setting tab, the following screen is displayed.
Select the projector you want to adjust from the list in the lower left corner of the screen. Then adjust the
settings for that projector.
Note: To select the projector using your keyboard, press the W key to move your selection upward, the
S key to move it downward, the A key to move it to the left, or the D key to move it to the right.
The following controls can apply to multiple projectors:
Shutter
On-Screen
Test Pattern
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Epson Pro L20000U Operating instructions

Category
Projectors
Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI