173.016UK User Manual
Caution
Do not cover cooling vents at the rear of the amplifier. Keep away from damp or dusty environments.
Check mains lead is in good condition and ensure mains outlet voltage is correct as indicated.
Use only approved fuse rated as shown. Unplug from mains before replacing fuse.
No user serviceable parts inside. Refer all servicing to qualified personnel.
Control panel
Operation
Connect your bass guitar to the input (1) via a 6.3mm jack lead.
If headphones are to be used for silent practice, connect these to the 3.5mm PHONES jack (7)
Turn the VOLUME control (2) fully down and all other controls to the vertical (12 o’clock) position.
Connect to mains using the supplied mains lead via the rear panel IEC connector and switch POWER on (8)
Gradually turn up the VOLUME control and play until sound is heard. Increase the VOLUME to the required level.
Adjust TREBLE, MIDDLE and BASS (3, 4, 5) controls to achieve the required tone character.
For wireless playback of backing tracks from a smart phone, the CB-10BT has a built-in Bluetooth receiver.
Press the BT button (6) in and the indicator will flash. In your phone menu, search for “CB-10BT” and select to pair.
Once pairing is completed, the indicator will stay on constantly and any tracks played on the smart phone should be
heard through the CB-10BT speaker. Once paired, the CB-10BT will connect to the paired smart phone automatically
whenever Bluetooth is switched on.
Specifications
Hereby, AVSL Group Ltd. declares that the radio equipment type 173.016UK is in compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the following internet address: http://www.avsl.com/assets/exportdoc/1/7/173016UK%20CE.pdf
Errors and omissions excepted. Copyright© 2023.
AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland