www.mounts.com | North America 800.368.9700 | International +1-714-632-7100
1321 S. State College Blvd., Fullerton, CA 92831 USA
Installation Guide
SYM-IB-EXT
Extrusion Nut Bar5/32” or M4 Allen Key
x2x1
End Cap Interface Bar
Center
Extrusion Nut
Bar
M5 x 10 mm Socket
Cap Screws
Remove the M5 x10 mm Socket Cap Screws and End
Caps using a 5/32” or M4 Allen Key.
Tighten the M8 x 10mm set screws on the Extrusion Nut
Bar using a 5/32” or M4 Allen Key. Insert the Interface Bar and tighten the M8 x 10mm set
screws on the Extrusion Nut Bar.
Insert the Extrusion Nut Bars into the Interface Bar.
The center of the Extrusion Nut Bar meets the edge of
the Interface bar.
1
3
2
4
www.mounts.com | North America 800.368.9700 | International +1-714-632-7100
1321 S. State College Blvd., Fullerton, CA 92831 USA
9531-000-052-0X Rev.0
Installation Guide
SYM-IB-EXT
NOT OK
NOT OK
NOT OK
OK
OK
OK
OK
Proper and Improper use of Extrustion nut bar
Max Load Per Display
175 lbs
116 lbs
88 lbs 88 lbs 88 lbs 88 lbs = 350 lbs
116 lbs 116 lbs = 350 lbs
175 lbs = 350 lbs
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Premier Mounts PMC-MM-500 Installation guide
-
-
-
-
-
-
-
-
-