AV:Link HS-1614W HDMI User manual

HS-1614W HDMI
AV:Link
Brand
AV:Link
Model
HS-1614W HDMI
Category
Video line amplifiers
Type
User manual

AV:Link HS-1614W HDMI is a 4-output distribution amplifier that transmits an UltraHD/8K source to multiple displays simultaneously. It supports resolutions up to 8K/60Hz 4:2:0 10bit, 8K/30Hz 4:4:4 10bit, and 4K/120Hz 4:4:4 10bit as well as features such as FRL, HDR, HDR10, HDR10+, and Dolby vision. With EDID management, CEC control, and audio extraction, it's ideal for various applications including hypermarkets and showrooms where multiple TVs require the same 8K/60Hz video source.

AV:Link HS-1614W HDMI is a 4-output distribution amplifier that transmits an UltraHD/8K source to multiple displays simultaneously. It supports resolutions up to 8K/60Hz 4:2:0 10bit, 8K/30Hz 4:4:4 10bit, and 4K/120Hz 4:4:4 10bit as well as features such as FRL, HDR, HDR10, HDR10+, and Dolby vision. With EDID management, CEC control, and audio extraction, it's ideal for various applications including hypermarkets and showrooms where multiple TVs require the same 8K/60Hz video source.

HS-1614W
1 x 4 Ultra HD/8K/60
Distribution Amplifier
USER MANUAL V1.8
Introduction
The HS-1614W distribution amplifier is available in sizes
up to 4 outputs and is ideal for applications that require a
reliable distribution of a single HDMI source signal to
various displays.
The HDMI 2.1 boards are HDCP 2.3 compliant and support
8K/60Hz. The HS-1614W distribution amplifier contributes
to displaying the same 8K/60Hz video source to different
televisions and screens at the same time in a hypermarket
or an electrical appliance store.
Package Contents
⚫ 1x AV LINK HS-1614W HDMI Distribution Amplifier
⚫ 1x User Manual
⚫ 1x Power Adapter DC 12V
⚫ 5x Screws
⚫ 4x Foot Pads
If there is anything missing, please contact your vendor.
-1-
Features
⚫ Distribute one UltraHD/8K source to 4 HDMI displays
⚫ HDMI 2.1/HDCP 2.3 compliant and 40Gbp bandwidth
⚫ Support up to 8K/60Hz 4:2:0 10bit, 8K/30Hz 4:4:4
10bit, and 4K/120Hz 4:4:4 10bit
⚫ Support FRL, HDR, HDR10, HDR10+, and Dolby
vision
⚫ Audio Extract Function with Stereo 3.5mm Aux
⚫ EDID management
⚫ CEC control
⚫ LED indicator shows operating status
⚫ Firmware upgrade via Micro-USB port
⚫ Cascading for the more distribution
Specifications
Function
HS-1614W
HDMI Input Connector
(A-Type Female)
1
HDMI Output Connector
(A-Type Female)
4
Max. Resolution
8K/60Hz YUV420;10 bit
Cable Distance
(Device to Monitor)
5m
Signal Type
Standard HDMI Signal
Power Adapter (Min.)
DC 12V/1.25A
Housing
Metal
Weight
650g
Dimensions (LxWxH)
210X114X25mm
LOCAL FRONT VIEW
LOCAL REAR VIEW
-2-
Connection
Installation
1. Connect the HDMI extension cable between the BD and
the “HDMI IN” port of HS-1614W Distribution Amplifier
Device.
2. Connect the HDMI extension cable between the UHDTV
and the “HDMI OUT” port of HS-1614W Distribution
Amplifier Device.
3. Connect the power cord on the extender.
4. Turn on the BD UHDTV and Power on HS-1614W.
Input/Output Interface
-3-
I/O number
Function
1
DC 12V Input
2
RS232
3
HDMI Output 1
4
HDMI Output 2
5
HDMI Input
6
HDMI Output 3
7
HDMI Output 4
8
Audio Output
9
Power LED
10
Firmware Upgrade
1
2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
11
EDID Management
12
Resolution Indicator
13
HDMI Input LED
14
HDMI Output 1 LED
15
HDMI Output 2 LED
16
HDMI Output 3 LED
17
HDMI Output 4 LED
EDID Selection 1:ON; 0:OFF
1 2 3 4
Mode
0 0 0 0
Copy OUT 1
0 0 0 1
Copy OUT 2
0 0 1 0
Copy OUT 3
0 0 1 1
Copy OUT 4
0 1 0 0
1920X1080p, 60Hz
0 1 0 1
1920X1080p, 120Hz
0 1 1 0
3840X2160p, 30Hz
0 1 1 1
3840X2160p, 60Hz
1 0 0 0
3840X2160p, 120Hz
1 0 0 1
7680X4320p, 30Hz
1 0 1 0
7680X4320p, 60Hz 4:2:0
Note
For the best 8K performance, it is recommended
to use 8K certified cable.
© C&C AV LINK GROUP LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-4-
  • Page 1 1
  • Page 2 2

AV:Link HS-1614W HDMI User manual

HS-1614W HDMI
AV:Link
Brand
AV:Link
Model
HS-1614W HDMI
Category
Video line amplifiers
Type
User manual

AV:Link HS-1614W HDMI is a 4-output distribution amplifier that transmits an UltraHD/8K source to multiple displays simultaneously. It supports resolutions up to 8K/60Hz 4:2:0 10bit, 8K/30Hz 4:4:4 10bit, and 4K/120Hz 4:4:4 10bit as well as features such as FRL, HDR, HDR10, HDR10+, and Dolby vision. With EDID management, CEC control, and audio extraction, it's ideal for various applications including hypermarkets and showrooms where multiple TVs require the same 8K/60Hz video source.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents