SELFIE LIGHT CLIP HEART
User manual
43067480
Step 1 Charging the Light
Open the bettery door
and insert the AAA battery
into the slot.
Step 2 Setting Up
Clip the selfíe light onto
your device. The light
should grip the device
securely
Step 3 Using the Selfie Light
Press the [Power] button
on the selfie light to turn the
light ON/OFF and change
the brightness setting.
Packing Accessories:
1. Selfie Ring light *1
2. User manual*1
Specification:
* 23 LED lights
* 3 light modes
* Powered by 2 X AAA battery
* (AAA battery not inclued)
*Please read all the information carefully before you use the
product and keep the manual for future reference. Safety
instructions:
Please read all safety instruction warnings carefully before using
this product. Improper use of this product may result in damage to
this or attached products. To ensure the production works well,
please never use this in the following conditions:
1. Moist or underwater conditions.
2. Conditions near heater or high temperature service.
3. Conditions with direct and strong sunshine.
4. Do not use chemical solvent on cleaning this product.
Getting started ...
WARNINGS: Insert batteries with the correct polarity and always
follow the manufacturer’s instructions.
Do not mix new and used batteries or alkaline,
standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
Remove batteries if product will be stored for an extended period.
Dispose of used batteries responsibly
THIS PRODUCT PRODUCES FLASH THAT MAY TRIGGER EPILEPSY
IN SENSITISED INDIVIDUALS