Foscam VC1 User manual

VC1

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch • Manuel d'utilisation

2

English

3 – 17

Čeština

18 – 32

Slovenčina

33 – 47

Magyar

48 – 62

Deutsch

63 – 77

3

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully

before first use and keep this user manual for future reference. Pay particular attention

to the safety instructions. If you have any questions or comments about the device,

please contact the customer line.

✉ www.alza.co.uk/kontakt

✆ +44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

4

Physical Description

Antenna

Power

Microphone

Night light ON/OFF

button

Indicator light

Speaker

Reset

LAN

Night Light

5

Insicator Light Descriptions

Indicator light

Status

Indication

1

Power on

Red light on

In the configuration mode

Blue light flashing

Working

Blue light on

Network

Red light flashing

2

3

4

Signal light

Indicator 2 to 4, the more

the number of lights, the

stronger the network

signal

Indicator light

6

Setting Up Your WiFi Chime: Connection via the Foscam

App

Before You Get Started

Scan the QR code below to download and install the Foscam App.

To ensure a smoother video experience on your smart phone, it is recommended that

your smart phone meet the following specifications:

• iOS: version 11 or higher

• Android: 4.1 or higher, using a device with a Graphics Processing.

Note: For the best experience, please updated the APP to the latest version!

WiFi Configuration

Please Note:

WiFi Chime does not need to plug in the internet cable.

1. Power on the WiFi Chime, and wait for a few minutes until hearing “Ready for

WiFi configuration”, then you will see the blue light is flashing.

Note: If anything goes wrong, please press and hold the “Reset” button on the bottom of

the WiFi Chime for more than 10 seconds.

7

2. Make sure that your smart phone is connected to your WiFi router.

3. Open the foscam APP and please sign up for a Foscam account, or sign in if you

have one already.

Reset

Your home

WiFi network

name (SSD)

8

4. Follow the steps below

1. Tap to add a device

2. Add Device – Scan the QR code.

9

4. Connect the power supply until the blue light of the device flash.

5. Wi-Fi connection – The device will add by scanning the QR code and sound waves.

6. Please turn up the volume of your phone and approach the WiFi Chime until

device prompts.

Important: Please turn

up the volume of your

phone and approach

to the WiFi Chime.

10

7. Set name – Device added successfully. Please set the camera name.

Congrulations!

The WiFi Extender can be used now.

Defualt Info: SSID: xxxx_5G/2.4G

Password: Same as your router passoword.

If needed to change, please refer to the left

picture.

11

How to link Foscam doorbell with WiFi Chime

It can be accomplished by configuring an automation: when someone presses the

doorbell, the Chime will ring synchronously.

Note:

• Please make sure you have added the Foscam doorbell and Foscam Chime to the

APP.

• To ensure the correct execution of the automation, please upgrade the doorbell

to the latest firmware.

• If you cannot find the added doorbell when creating the smart condition, please

reset and delete the doorbell and add it again.

Create condition: press the doorbell

Open the

Foscam APP

12

Add task: the Chime rings

13

Save it

Make sure that the switch of the automation is turned on and the devices are online,

then the Chime will ring synchronously after pressing the doorbell.

14

FAQ

Q: How to do when you do not hear “WiFi Connection” after scanning the QR-code

during WiFi setup stage?

A: Make sure that your cell phone is close to the WiFi Chime (withing 1 meter) and the

surrounding environment is relatively quit, then reset and re-add it in Foscam app.

Q: After set up the WiFi Chime smart linkage (such as your Foscam doorbell and the

Chime linkage), how to do when the WiFi Chime does not respond after the event is

triggered (such as when your Foscam doorbell is pressed)?

A: Make sure that your router connect to the internet; If the WiFi Chime’s status indicator

is still not in a steady blue state, please reset and re-add it in Foscam app.

Q: Can WiFi Chime improve my WiFi speed?

A: All WiFi extenders can only increase the coverage range of the WiFi network.

Q: How to do if my WiFi Chime often loses connection?

A: Please reduce the distance between your router and the WiFi Chime. It is

recommended that at least two indicators of signal light are on.

Q: Can the WiFi Chime be used as a wired extender?

A: Yes. For more details, please search WiFi Chime via link:

https://www.foscam.com/fasq/index.html or scan the QR code below:

15

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you

need repair or other services during the warranty period, contact the product seller

directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for

which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended

or failing to follow the instructions for maintenance, operation, and service of the

product.

• Damage to the product by a natural disaster, the intervention of an unauthorized

person or mechanically through the fault of the buyer (e.g., during transport,

cleaning by inappropriate means, etc.).

• Natural wear and aging of consumables or components during use (such as

batteries, etc.).

• Exposure to adverse external influences, such as sunlight and other radiation or

electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,

electrostatic discharge voltage (including lightning), faulty supply or input voltage and

inappropriate polarity of this voltage, chemical processes such as used power

supplies, etc.

• If anyone has made modifications, modifications, alterations to the design or

adaptation to change or extend the functions of the product compared to the

purchased design or use of non-original components.

16

EU Declaration of Conformity

Identification data of the manufacturer's / importer's authorized representative:

Importer: Alza.cz a.s.

Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7

CIN: 27082440

Subject of the declaration:

Title: WiFi extender

Model / Type: VC1

The above product has been tested in accordance with the standard(s) used to

demonstrate compliance with the essential requirements laid down in the

Directive(s):

Directive No. 2014/53/EU

Directive No. 2011/65/EU as amended 2015/863/EU

17

WEEE

This product must not be disposed of as normal household waste in accordance with

the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU).

Instead, it shall be returned to the place of purchase or handed over to a public

collection point for the recyclable waste. By ensuring this product is disposed of

correctly, you will help prevent potential negative consequences for the environment

and human health, which could otherwise be caused by inappropriate waste handling of

this product. Contact your local authority or the nearest collection point for further

details. Improper disposal of this type of waste may result in fines in accordance with

national regulations.

18

Vážený zákazníku,

Děkujeme vám za zakoupení našeho produktu. Před prvním použitím si prosím pečlivě

přečtěte následující pokyny a uschovejte si tento návod pro budoucí použití. Zvláštní

pozornost věnujte bezpečnostním pokynům. Pokud máte k přístroji jakékoli dotazy nebo

připomínky, obraťte se na zákaznickou linku.

✉ www.alza.cz/kontakt

✆ +420 225 340 111

Dovozce Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

19

Popis zařízení

Anténa

Napájení

Mikrofon

Tlačítko zapnutí/vypnutí

nočního světla

Kontrolka

Reproduktor

Obnovení

LAN

Noční světlo

20

Kontrolka světla

Kontrolka

Stav

Indikace

1

Zapnutí napájení

Svítí červené světlo

V režimu konfigurace

Bliká modré světlo

Pracovní stránky

Svítí modré světlo

Síť

Bliká červené světlo

234

Signální světlo

Indikátor 2 až 4, čím více

svítí, tím silnější je síťový

signál.

Kontrolka

Page is loading ...

Foscam VC1 User manual

Foscam VC1 User manual

in other languages

Related papers

Other documents