SCE SCE-20XEL2108LP Installation Information

Type
Installation Information
ABB Flange Mounted Disconnects and Circuit Breakers
1
ABB-FLANGE-MOUNTED-DISCONNECTS
Flange Mounted Operator Handle and Operating Mechanisms, variable depth and cable operated. The D1
Cutout detail is the standard cutout in all Stock SCE enclosures.
*The exception is part numbers with the Letter U at the end (Example: SCE-84XM4018U), this indicates the
Universal Cutout (D7).
Adapter Kits available for use with Universal Cutout, for D2 cutout: SCE-UA400V and for D1 cutout: SCE-UAV.
HANDLE /
OPERATOR
CUTOUT
DETAIL
FNS-HS12
D1
FNS-HS4
D1
K5FCH
D1
K5FCH4
D1
K7FCH
D2
K7FCH4
D2
OHF1C12T
D1
OHF1C12
D1
OHF1C4
D1
OHF1C4T
D1
XT1, S1
D1
XT2, S2
D1
XT3, S3
D1
XT4, S4
D1
XT5, T5, S5
D1
XT6, T6, S6
D2
XT7, T7, S7
D2
D1
D2
D7
  • Page 1 1

SCE SCE-20XEL2108LP Installation Information

Type
Installation Information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI