2. Avteq
  3. AVTCRD2V

Avteq AVTCRD2V, AVTCRD3V, Credenza2-V Installation guide

  • Hello! I've reviewed the Credenza assembly manual. It outlines how to assemble and mount the credenza, including attaching the uprights and camera support. The manual also details the adjustment options for the uprights to accommodate diverse screen mount types. I am here to help with any questions you may have about setting up your product.
  • What is the purpose of the holes at the top and bottom of the uprights?
    What hardware is used to mount the camera support?
Assistance: www.avteq.net
(214)905-9001
1151 Empire Central Dallas, TX 75247
PH(800) 285-8315 FAX(214) 905-9666
CREDENZA
ASSEMBLY MANUAL
Assistance: www.avteq.net
(214)905-9001
1151 Empire Central Dallas, TX 75247
PH(800) 285-8315 FAX(214) 905-9666
UPRIGTHS
ASSEMBLY
SCREW 516" × 34"
+ WASHER (×16)
These holes at the top and the bottom
are used to adjust the uprigths for different
screen mounts
Assistance: www.avteq.net
(214)905-9001
1151 Empire Central Dallas, TX 75247
PH(800) 285-8315 FAX(214) 905-9666
SLIDE THE CAMERA SUPPORT FROM ONE
SIDE OF THE WALL MOUNT BEFORE
PUTTING THE BRACKETS
MOUNTIGN THE CAMERA SUPPORT
FOR WALL MOUNT USE
SIDE VIEW
SCREW 516" × 1 14" +
2 WASHER + NUTS
(×4)
/