Page is loading ...
Dale TV Stand with Fireplace
www.belleze.com
1-800-682-6376
@bellezefurniture
FOLLOW US: CONTACT INFO: ITEM NO. 014-HG-41900-HT
The instruction booklet contains IMPORTANT
safety information. Please read it in full and
keep it for future reference.
2
LB
Estimated time for assembly:
Weight limitations are as follows:
60 mins
Scan this QR Code
to view our online tutorial
Maximum Load
15 lb
Maximum Load
15 lb
Maximum Load
70 lb
3
v.07132022
Assemble the furniture on an empty carton, carpet, or rug to prevent scratches
or damage.
For safety, please keep pets and children away from the assembly area.
Ensure the product is fully assembled before use. If you are missing any
hardware or products, do not use it until you have restored the missing parts.
This furniture requires 2 people for assembly.
Read this instruction manual prior to assembly to familiarize yourself with the
various steps.
Lay out all components and hardware separately on a at surface and make
sure that no parts are missing or damaged before assembly. Do not destroy or
discard any packaging until you are certain that you have all the necessary parts
for assembly.
Hand tight all hardwares and careful not to over tighten to avoid damaging the
product.
CAUTION
There are small components used in the construction of this product.
Loose items should be kept away from pets and children to avoid a choking
hazard.
Keep all plastic bags and packaging lm away from pets and children to avoid
suocation.
4
PACKAGE CONTENTS
1
2
3
4
5
6
7
8
9
9
10
11
11
12
12
19
18
17
16
15
14
13
13
5
v.07132022
PACKAGE CONTENTS
CODE DESCRIPTION QTY
1 Top Panel 1
2 Left Panel 1
3 Left Median Panel 1
4 Right Median Panel 1
5 Right Panel 1
6 Base 1
7 Center Storage Shelf Panel 1
8Fire Mantel Trim Top Panel 1
9 Fire Mantel Side Trim Panel 2
10 Back Panel 1
11 Left Storage Shelf Panel 2
12 Right Storage Shelf Panel 2
13 Cabinet Door 2
14 Drawer Front Panel 1
15 Drawer Left Panel 1
16 Drawer Right Panel 1
17 Drawer Back Panel 1
18 Drawer Bottom Panel 1
19 Drawer Support Bar 1
6
31x + 3x
6x
2x 2x 1x
31x + 3x
24x + 2x
27x + 2x
4x
31x
12x + 1x
Ø4 x 30
Ø3.5 x 15
Ø3.5 x 12
PACKAGE CONTENTS
A
B
C
D
E
FGH
IJ K
Install all hardware perpendicular to the opening.
7
v.07132022
2x 4x 16x + 1x 3x
6x 4x 4x 2x
2x 2x 2x
Ø4 x 12 Ø4 x 18
Ø4 x 25
Ø3 x 17
5/32” x 12
5/32” x 22
PACKAGE CONTENTS
LMN
O
PQR
S
TU
V
Install all hardware perpendicular to the opening.
8
A
4
Required tools for assembly (Not included)
1Attach cam bolts on the median panels and on the re mantel side trim panels.
8xA
9
9
3
9
v.07132022
4
4
9
9
9
9
3
3
D
2
B
C
3Attach the re mantel side trim panels to the median panels.
Insert wood dowels to the median panels.
4x
12x
4x
B
C
D
10
1
1
1
2
2
2
3
3
3
3
4
H
4
I
Attach drawer slide mounting brackets to the median panels.
I
6x
2x
H
I
Ø3.5 x 12
11
v.07132022
BD
6
8
5
8
Attach cam bolts to the base and the re mantel top trim panel.
Insert wood dowels to the center storage shelf panel, and attach the re mantel
top trim panel to it.
7
6
C
10xA
A
2x
2x
B
D
6xC
12
7
7
6
4
4
3
3
7
8
D
D
B
B
Attach center storage shelf panel between the two median panels.
8Assemble the median panels on top of the base.
4x
4x
4x
4x
B
B
D
D
13
v.07132022
7
4
3
5
2
C
10
9
10
Slide in the back panel.
Insert wood dowels to the left and right panel.
8x
C
14
2
6
5
11 Assemble the left and right panel to the base.
A
1
B D
4x
4x
B
D
12 Attach cam bolts on the under side of the top panel.
8xA
15
v.07132022
3
6
13
4
1
B D
2
5
10
Assemble the top panel on top of the assembly.
8x
8x
B
D
16
5
6
R
1
Q
3
14 Secure the back panel in place
4x
4x
Q
R
Ø3 x 17
17
v.07132022
56
1
3
15 Set the replace inside the re mantel.
Set the replace from the back of the re mantel and center it in the opening.
For the exact instruction, please refer to the user’s manual provided with the
replace.
NOtE: Do not attempt to install the replace from the front of the re mantel. It
will not t.
18
14
16
A
3x
6x
O
P
17 Attach cam bolts on the back side of the drawer front panel.
Ø4 x 12
5xA
19
v.07132022
I
16
E
17
15
1
1
1
2
2
2
3
3
3
16
18 Attach drawer slides to the drawer side panels.
15
H
19 Assemble the drawer back panel between the drawer side panels.
4x
E
6x
2x
H
I
Ø3.5 x 12 Ø4 x 30
20
19
16
18
18
C
17
20
E
15
Slide in the drawer bottom panel.
21 Assemble the drawer support bar to the drawer assembly.
2xE
Ø4 x 30
1xC
/
