ABRITES MKON184 User manual

MKON184
Brand
ABRITES
Model
MKON184
Type
User manual

The ABRITES MKON184, your newly acquired device, is a must-have tool for automotive professionals, offering a wide range of capabilities to enhance your diagnostic and programming tasks. With its user-friendly interface and advanced features, this versatile tool will revolutionize your workflow.

The ABRITES MKON184, your newly acquired device, is a must-have tool for automotive professionals, offering a wide range of capabilities to enhance your diagnostic and programming tasks. With its user-friendly interface and advanced features, this versatile tool will revolutionize your workflow.

2021 Abrites Diagnostics for Daihatsu User Manual
ABRITES DIAGNOSTICS
FOR DAIHATSU
User manual
version 1.1
www.abrites.comwww.abrites.com
www.abrites.com 2
2021 Abrites Diagnostics for Daihatsu User Manual
Important notes
Warranty
The Abrites software and hardware products are developed, designed and manufactured by Abrites Ltd.
During the production process we comply to all safety and quality regulations and standards, aiming at
highest production quality. The Abrites hardware and software products are designed to build a coherent
ecosystem, which effectively solves a wide range of vehicle-related tasks, such as:
Diagnostic scanning;
Key programming;
Module replacement,
ECU programming;
Configuration and coding.
All software and hardware products by Abrites Ltd. are copyrighted. Permission is granted to copy Abrites
software files for your own back-up purposes only. Should you wish to copy this manual or parts of it, you
are granted permission only in case it is used with Abrites products, has “Abrites Ltd.” written on all copies,
and is used for actions that comply to respective local law and regulations.
You, as a purchaser of Abrites hardware products, are entitled of a two-year warranty. If the hardware
product you have purchased has been properly connected, and used according to its respective instruc-
tions, it should function correctly. In case the product does not function as expected, you are able to
claim warranty within the stated terms. Abrites Ltd. is entitled to require evidence of the defect or mal-
function, upon which the decision to repair or substitute the product shall be made.
There are certain conditions, upon which the warranty cannot be applied. The warranty shall not apply to
damages and defects caused by natural disaster, misuse, improper use, unusual use, negligence, failure to
observe the instructions for use issued by Abrites, modifications of the device, repair works performed by
unauthorized persons. For example, when the damage of the hardware has occurred due to incompatible
electricity supply, mechanical or water damage, as well as fire, flood or thunder storm, the warranty does
not apply.
Each warranty claim is inspected individually by our team and the decision is based upon thorough case
consideration.
Read the full hardware warranty terms on our website.
www.abrites.com 3
2021 Abrites Diagnostics for Daihatsu User Manual
Copyright information
Safety information
Copyright:
All material herein is Copyrighted ©2005-2021 Abrites, Ltd.
Abrites software, hardware, and firmware are also copyrighted
Users are given permission to copy any part of this manual provided that the copy is used with Abrites
products and the “Copyright © Abrites, Ltd.” statement remains on all copies
“Abrites” as used in this manual synonymous with “Abrites, Ltd.” And all it’s affiliates
The “Abrites” logo is a registered trademark of Abrites, Ltd.
Notices:
The information contained in this document is subject to change without prior notice. Abrites shall
not be held liable for technical/editorial errors, or omissions herein.
Warranties for Abrites products and services are set forth in the express written warranty statements
accompanying the product. Nothing herein should be construed as constituting any additional war-
ranty.
Abrites assumes no responsibility for any damage resulting from the use, misuse, or negligent use of
the hardware or any software application.
The Abrites products are to be used by trained and experienced users in diagnostics and reprogramming
of vehicles and equipment. The user is assumed to have a good understanding of vehicle electronic sys-
tems, as well as potential hazards while working around vehicles. There are numerous safety situations
that cannot be foreseen, thus we recommend that the user read and follow all safety messages in the
available manual, on all equipment they use, including vehicle manuals, as well as internal shop docu-
ments and operating procedures.
Some important points:
Block all wheels of the vehicle when testing. Be cautious when working around electricity.
Do not ignore the risk of shock from vehicle and building-level voltages.
Do not smoke, or allow sparks/flame near any part of the vehicle fuel system or batteries.
Always work in an adequately ventilated area, vehicle exhaust fumes should be directed towards the
exit of the shop.
Do not use this product where fuel, fuel vapours, or other combustibles could ignite.
In case any technical difficulties occur, please contact the
Abrites Support Team by email at [email protected]om.
www.abrites.com 4
www.abrites.com 4
2021 Abrites Diagnostics for Daihatsu User Manual
List of revisions
Date Chapter Description Revision
24.06.2014 1.0
1.1
Initial version of the document.
01.10.2015 Revised, updated, renewedALL
www.abrites.com 5
2021 Abrites Diagnostics for Daihatsu User Manual
Table of contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
1.1 Scope of the manual ...... . . . . . . . . . ..................................6
2. System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
3. Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
4. Basic Diagnostic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5. Special Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.1 Special function “Transponder Tool” ................................11
5.1.1 Identification of a key or transponder ..............................14
5.1.2 Cloning of a key or transponder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.1.3 Preparation of transponders/keys ready for usage with the vehicle . .14
5.1.4 Preparation of a key by dump of immobilizer ......................15
5.2 Special function “Dump Tool” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
www.abrites.com 6
2021 Abrites Diagnostics for Daihatsu User Manual
1. Introduction
Congratulations on choosing our wonderful product!
“Abrites Diagnostics for Daihatsu” is a Windows PC based diagnostic software for Daihatsu vehicles. With
the help of this software you can perform complete diagnostic operations of all vehicles.
For proper operation of your diagnostic software you will need a corresponding interface for connection
between your PC and vehicle named “AVDI”.
AVDI is an interface produced by Abrites Ltd. intended to act as an interface between the PC and the
electronic control units.
AVDI should be used with ABRITES software produced by Abrites Ltd.
ABRITES is a trade mark of Abrites Ltd.
1.1 Scope of the manual
This document describes the usage of Abrites Diagnostics for Daihatsu.
The document is applicable for the software versions 1.0 or newer.
In this manual we suppose that software for your AVDI interface is already installed.
Please refer “AVDI Common User’s Manual” in case it is not.
– Operation system Windows XP, Windows 2000, Windows Vista, Windows 7
– At least Pentium 4 with 512 MB RAM.
Note: Windows RT is not supported!
2. System requirements
www.abrites.com 7
2021 Abrites Diagnostics for Daihatsu User Manual
You can start Abrites Diagnostics for Daihatsu by starting the Abrites Quick Start application and
selecting Daihatsu.
When the diagnostic application is started the main screen of the application
will appear – picture 1.
3. Getting Started
The screen is divided in two parts – the upper part where all electronic control units assembled in
Daihatsu vehicles are listed and the lower part of the screen where the additional special functionalities
available in your diagnostic software are listed.
By double-clicking on the desired electronic control unit the user can establish a diagnostic session with
the corresponding control unit.
Once a unit is selected by the list the user can move the selection up and down in the list by using
the buttons and . The button will establish a diagnostic session with the currently
selected electronic control unit.
www.abrites.com 8
2021 Abrites Diagnostics for Daihatsu User Manual
4. Basic Diagnostic
As described you can establish a diagnostic session with most electronic control units in the vehicle.
When the diagnostic session is established the basic diagnostic screen will appear (picture 2)
If for some reason the diagnostic session can not be established you will be notified.
In the basic diagnostic screen you have a choice to read registered DTCs, clear them, display live data or
to perform other actions from the “Special” button.
To read all DTCs press the button “Read DTCs” - all DTCs with their status – current, history or pending
will be displayed.
www.abrites.com 9
2021 Abrites Diagnostics for Daihatsu User Manual
Each DTCs is described with its number (Uxxxx, Bxxxx or Cxxxx) and with a detailed description.
To clear stored DTCs in the electronic control unit press button “Clear DTCs”.
Live data or so named measured values is data sampled by the electronic control units giving us a detailed
view of the current status of the corresponding unit.
Simply press the “Live Data” button and everything available from the current unit will be displayed
– Picture 3.
www.abrites.com 10
2021 Abrites Diagnostics for Daihatsu User Manual
Pressing of the button “Actuator” will display the screen with available actuator tests for the control unit:
www.abrites.com 11
2021 Abrites Diagnostics for Daihatsu User Manual
5. Special Functions
The ABRITES Diagnostics for Daihatsu has some unique diagnostic abilities, which are not supported by
other diagnostic tools. These functions are accessible from the Special Functions tab on the main screen.
Please, note that depending on the version you have purchased some of these functions may not be avail-
able in your configuration. In this case a message will inform you that you need to acquire an additional
license.
5.1 Special function “Transponder Tool”
Before usage of special function “Transponder Tool” please be sure that your transponder programmer is
connected to the AVDI interface.
www.abrites.com 12
2021 Abrites Diagnostics for Daihatsu User Manual
When your transponder programmer is detected a list of sub functions will appear – Identification of a key
or transponder, Cloning of a key/transponder, Preparation (production) of transponders ready for usage
with Daihatsu vehicles, Programming transponder by the dump of immobilizer/smart system.
Before usage of your programmer please take into account:
while operating the antenna of the transponder the programmer should be kept away from metal
surfaces
key or transponder should be placed near the antenna to allow proper reading and programming.
www.abrites.com 13
www.abrites.com 13
2021 Abrites Diagnostics for Daihatsu User Manual
Transponder position should be at 1 cm.
from antenna surface.
Regular key example.
Smart key example.
Find bellow example of some key and transponder positions:
www.abrites.com 14
2021 Abrites Diagnostics for Daihatsu User Manual
5.1.1 Identification of a key or transponder
If you have a key or transponder simply place it near the antenna of the programmer and press the “Read/
Identify” button. A message about type of your transponder and content programmed will be displayed. If
your transponder is some of the known transponder types information about this type (e.g. Texas Crypto
4D) will be displayed .
Abrites Diagnostics for Toyota/Lexus/Scion will try to recognize ONLY transponders/keys used in Daihat-
su vehicles. These types are as follows:
Fixed transponder Texas 4C. This type of transponder consist of only identification number and
do not contain any authentication logic.
Crypto transponder Texas 4D. This type of transponder consist of a set of data fields program-
mable by the user than can be used from immobilizer system to decide whether the key has been
programmed in the vehicle. In addition this transponder provides the ability for programming of
40 bits secret keys which can be used by immobilizers to identify the transponder by a special
authentication algorithm.
5.1.2 Cloning of a key or transponder
With the help of this option you can prepare a fully functional cloning of an existing vehicle’s keys.
Supported keys/transponders for cloning are:
Texas 4C fixed. In the cloned key you should use transponder type TPX1 produced by JMA Com-
pany or compatible.
Texas 4D transponders. You should use an empty (brand new) transponder named TPX2 pro-
duced by JMA Company or compatible.
5.1.3 Preparation of transponders/keys ready for usage with the vehicle
Usually when you need to add an additional key to the vehicle or all keys are lost you need to use some
kind of key or transponder.
Transponder inside of the key should be with a special content in order for future programming by diag-
nostics to be possible.
“Production” utility provides the ability to program an empty (brand new) transponder as at transponder
ready for acceptance by the immobilizer system of the vehicle.
Transponders applicable for this utility are virgin Texas 4D transponders or TPX2 transponders.
www.abrites.com 15
2021 Abrites Diagnostics for Daihatsu User Manual
5.1.4 Preparation of a key by dump of immobilizer
This utility will provide the ability to prepare a key when you have the dump of the immobilizer system.
All that is needed from you is to read by some IC programmer the eeprom of your immobilizer/smart
module, to load it in the application, it will automatically identify the type of your vehicle and the needed
transponder or key for programming. When the key is programmed with the same IC programmer you can
program the new dump (modified by application) in the immobilizer/smart module back.
www.abrites.com 16
2021 Abrites Diagnostics for Daihatsu User Manual
5.2 Special function “Dump Tool”
This special function will help you when the dump of some electronic control unit is present to reset it in
virgin state, to adjust mileage or to clear crash data records from airbag control modules.
Once the dump is modified it should be saved and programmed back in the corresponding control unit.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

ABRITES MKON184 User manual

MKON184
Brand
ABRITES
Model
MKON184
Type
User manual

The ABRITES MKON184, your newly acquired device, is a must-have tool for automotive professionals, offering a wide range of capabilities to enhance your diagnostic and programming tasks. With its user-friendly interface and advanced features, this versatile tool will revolutionize your workflow.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents