2. FURNITUREBOX
  3. Corona Dining Chairs

FURNITUREBOX Corona Dining Chairs Assembly Instruction Manual

  • Hello! I've reviewed the assembly guide for the Corona Gold Chair from furniturebox. This guide provides step-by-step instructions for assembling your chair, along with important safety and care advice. I'm ready to assist you with any questions you might have about the chair's assembly or features mentioned in the document. The document covers a maximum weight capacity of 130 kg, and advises against using power tools.
  • What tools are needed for assembly?
    How should I clean the chair?
    What is the maximum weight the chair can support?
CORONA
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/corona-gold-chair
SCAN ME
• Check you have all the components and
tools listed.
• Remove all fttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from
the work area, small parts could cause
choking if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE
www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly.
In some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
MAXIMUM
CAPACITY 130Kg
ONE
PERSON
30 MINUTE
BUILD
Follow us on Instagram
@furniturebox_uk
STEP 1
Place the seat [1] on a at surface (ie. table top) with the
back overhanging. Line the legs [2] up with the seat holes.
Using xings tighten the legs onto the seat. Using allen key
(D) tighten the legs onto the seat with xings (A), (C) & (B)
www.furniturebox.co.uk
STEP 2
Sit on the chair and
fully tighten all bolts.
FULL ASSEMBLY INSTRUCTIONS
www.furniturebox.co.uk
The cushions (foam inserts and
covers) are not covered by the guarantee.
/