Gigabyte GA-8I915P-D Pro Owner's manual

Category
Server/workstation motherboards
Type
Owner's manual
GA-8I915P-D Pro
Intel® Pentium® 4 LGA775 Processor Motherboard
User's Manual
Rev. 2003
12ME-8I915PDP-2003
Motherboard
GA-8I915P-D Pro
Jun. 11, 2004
Jun. 11, 2004
Motherboard
GA-8I915P-D Pro
Copyright
© 2004 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in the manual are legally registered to their respective companies.
Notice
The written content provided with this product is the property of Gigabyte.
No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any
means without Gigabyte's prior written permission. Specifications and features are subject to
change without prior notice.
Product Manual Classification
In order to assist in the use of this product, Gigabyte has categorized the user manual in the
following:
nFor quick installation, please refer to the "Hardware Installation Guide" included with the
product.
nFor detailed product information and specifications, please carefully read the
"Product User Manual".
nFor detailed information related to Gigabyte's unique features, please go to "Technology
Guide" section on Gigabyte's website to read or download the information you need.
For more product details, please click onto Gigabyte's website at www.gigabyte.com.tw
- 4 -
Table of Contents
GA-8I915P-D Pro Motherboard Layout ......................................................................6
Block Diagram...........................................................................................................7
Chapter 1 Hardware Installation.................................................................................9
1-1Considerations Prior to Installation ..................................................................... 9
1-2Feature Summary............................................................................................... 10
1-3Installation of the CPU and Heatsink................................................................ 12
1-3-1Installation of the CPU.....................................................................................12
1-3-2Installation of the Heatsink...............................................................................13
1-4Installation of Memory........................................................................................ 14
1-5Installation of Expansion Cards......................................................................... 16
1-6I/O Back Panel Introduction............................................................................... 17
1-7Connectors Introduction ..................................................................................... 18
Chapter 2 BIOS Setup ...........................................................................................29
The Main Menu (For example: BIOS Ver. : F3c)......................................................... 30
2-1Standard CMOS Features.................................................................................. 32
2-2Advanced BIOS Features.................................................................................. 34
2-3Integrated Peripherals........................................................................................ 36
2-4Power Management Setup................................................................................. 39
2-5PnP/PCI Configurations..................................................................................... 41
2-6PC Health Status................................................................................................. 42
2-7MB Intelligent Tweaker(M.I.T.).......................................................................... 43
2-8Select Language ................................................................................................. 45
2-9 Load Fail-Safe Defaults...................................................................................... 45
2-10 Load Optimized Defaults.................................................................................... 46
2-11 Set Supervisor/User Password......................................................................... 46
2-12 Save & Exit Setup............................................................................................... 47
2-13 Exit Without Saving............................................................................................. 47
- 5 -
Chapter 3 Install Drivers.........................................................................................49
3-1Install Chipset Drivers........................................................................................ 49
3-2Software Applications......................................................................................... 50
3-3Driver CD Information......................................................................................... 50
3-4Hardware Information ......................................................................................... 51
3-5Contact Us........................................................................................................... 51
Chapter 4 Appendix...............................................................................................53
4-1Unique Software Utilities.................................................................................... 53
4-1-1Xpress Recovery Introduction ..........................................................................54
4-1-2Flash BIOS Method Introduction ......................................................................57
4-1-3 2- / 4- / 6- / 8- Channel Audio Function Introduction.........................................68
4-2Troubleshooting................................................................................................... 73
- 6 -
GA-8I915P-D Pro Motherboard Layout
KB_MSATX_12V
CPU_FAN
LGA775
SPDIF_O
COMA LPT
USB
LAN
IR
BAT
TSB43AB23
Marvell
8001
CD_IN
AZALIA_FP
Intel 915P
NB_FAN
AUDIO1
S_ATA0
ICH6
Main
BIOSBackup
BIOSPCI1
PCI2
DDRII1
DDRII2
DDRII3
DDRII4
ATX
PWR_FAN
IDE
SYS_FAN
S_ATA3
S_ATA2
S_ATA1
FDD
PWR_LED
F_PANEL
CLR_CMOS
F1_1394
F2_1394
PCIE_16
PCIE_1
PCIE_2
PCIE_3
F_USB2
F_USB1
IT8712
CODEC
R_USB
GA-8I915P-D Pro
SPDIF_I
AUDIO2
- 7 -
Block Diagram
Line-Out
MIC
Center/Subwoofer Speaker Out
LGA775
Processor
CPUCLK+/-(200/133MHz)
PCI Express x16
33MHz
Host
Interface
Intel
915P
MCH MCHCLK (133/200MHz)
66MHz
48MHz
DDRII 600(Note)/533/400MHz DIMM
Dual Channel Memory
COM Port
Floppy
PS/2 KB/Mouse
24MHz
33MHz
IT 8712
4 Serial ATA
ATA33/66/100
IDE Channels
Intel
ICH6
14.318MHz
Dual BIOS
8 USB
Ports
CODEC
Line-In
PCI Express x1 Bus
PCICLK
(33MHz)
2 PCI
PCI Bus
Marvell
8001
RJ45
3 IEEE1394
TSB43AB23
SPDIF In
SPDIF Out
LPT Port
3 PCI Express x 1 Ports
Side Speaker Out
Surround Speaker Out
PCI-ECLK
(100MHz)
PCI-ECLK
(100MHz)
(Note)To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB
processor and overclock in BIOS.
- 8 -
Hardware Installation- 9 -
English
1-1Considerations Prior to Installation
Preparing Your Computer
The motherboard contains numerous delicate electronic circuits and components which can
become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please
follow the instructions below:
1.Please turn off the computer and unplug its power cord.
2.When handling the motherboard, avoid touching any metal leads or connectors.
3. It is best to wear an electrostatic discharge (ESD) cuff when handling electronic components
(CPU, RAM).
4.Prior to installing the electronic components, please have these items on top of an antistatic pad or
within a electrostatic shielding container.
5.Please verify that you the power supply is switched off before unplugging the power supply connector
from the motherboard.
Installation Notices
1.Prior to installation, please do not remove the stickers on the motherboard. These stickers are required
for warranty validation.
2.Prior to the installation of the motherboard or any hardware, please first carefully read the information
in the provided manual.
3.Before using the product, please verify that all cables and power connectors are connected.
4.To prevent damage to the motherboard, please do not allow screws to come in contact with the
motherboard circuit or its components.
5.Please make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
6.Please do not place the computer system on an uneven surface.
7.Turning on the computer power during the installation process can lead to damage to system
components as well as physical harm to the user.
8. If you are uncertain about any installation steps or have a problem related to the use of the product,
please consult a certified computer technician.
Instances of Non-Warranty
1.Damage due to natural disaster, accident or human cause.
2.Damage as a result of violating the conditions recommended in the user manual.
3.Damage due to improper installation.
4.Damage due to use of uncertified components.
5.Damage due to use exceeding the permitted parameters.
6.Product determined to be an unofficial Gigabyte product.
Chapter 1 Hardware Installation
GA-8I915P-D Pro Motherboard- 10 -
English
CPUwSupports the latest Intel® Pentium® 4 LGA775 CPU
wSupports 800/533MHz FSB
wL2 cache varies with CPU
ChipsetwNorthbridge: Intel® 915P Express Chipset
wSouthbridge: Intel® ICH6
Memoryw4 DDR II DIMM memory slots (supports up to 4GB memory) (Note 1)
wSupports dual channel DDR II 600(Note 2)/533/400 DIMM
wSupports 1.8V DDR II DIMM
Slotsw1 PCI Express x 16 slot
w3 PCI Express x 1 slots
w2 PCI slots
IDE Connectionsw1 IDE connection (UDMA 33/ATA 66/ATA 100), allows connection of 2
IDE devices
FDD Connectionsw1 FDD connection, allows connection of 2 FDD devices
Onboard SATAw4 Serial ATA connections
Peripheralsw1 parallel port supporting Normal/EPP/ECP mode
w1 Serial port (COMA)
w8 USB 2.0/1.1 ports (rear x 4, front x 4 via cable)
w3 IEEE1394 ports (requires cable)
w1 front audio connector
w1 IR connector
w1 PS/2 keyboard port
w1 PS/2 mouse port
Onboard LANwOnboard Marvell 8001 chip (10/100/1000 Mbit)
w1 RJ 45 port
Onboard AudiowALC880 CODEC
wSupports Jack Sensing function
wSupports 2 / 4 / 6 / 8 channel audio
wSupports Line In ; Line Out (Front Speaker Out) ; MIC ; Surround Speaker Out
(Rear Speaker Out) ; Center/Subwoofer Speaker Out ;
Side Speaker Out connection
wSupports SPDIF In/Out connection
wCD In
I/O ControlwIT8712
(Note 1)Due to standard PC architecture, a certain amount of memory is reserved for system usage and
therefore the actual memory size is less than the stated amount.
For example, 4 GB of memory size will instead be shown as 3.xxGB memory during system startup.
(Note 2)To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB
processor and overclock in BIOS.
1-2Feature Summary
Hardware Installation- 11 -
English
Hardware MonitorwSystem voltage detection
wCPU temperature detection
wCPU / System / Power fan speed detection
wCPU warning temperature
wCPU / System / Power fan failure warning
wCPU smart fan control
BIOSwUse of licensed AWARD BIOS
wSupports Dual BIOS/Q-Flash/Multilanguage
Additional FeatureswSupports @BIOS
wSupports EasyTune
Overclocking wOver Voltage via BIOS (CPU/DDR II/PCI-E)
wOver Clock via BIOS (CPU/DDR II)
Form FactorwATX form factor; 30.5cm x 24.4cm
GA-8I915P-D Pro Motherboard- 12 -
English
1-3Installation of the CPU and Heatsink
Before installing the CPU, please comply with the following conditions:
1.Please make sure that the motherboard supports the CPU.
2.Please take note of the one indented corner of the CPU. If you install the CPU in the wrong
direction, the CPU will not insert properly. If this occurs, please change the insert direction
of the CPU.
3.Please add an even layer of heat sink paste between the CPU and heatsink.
4.Please make sure the heatsink is installed on the CPU prior to system use, otherwise
overheating and permanent damage of the CPU may occur.
5.Please set the CPU host frequency in accordance with the processor specifications. It is not
recommended that the system bus frequency be set beyond hardware specifications since it
does not meet the required standards for the peripherals. If you wish to set the frequency
beyond the proper specifications, please do so according to your hardware specifications
including the CPU, graphics card, memory, hard drive, etc.
HT functionality requirement content :
Enabling the functionality of Hyper-Threading Technology for your computer system requires all
of the following platform components:
- CPU: An Intel® Pentium 4 Processor with HT Technology
- Chipset: An Intel® Chipset that supports HT Technology
- BIOS: A BIOS that supports HT Technology and has it enabled
- OS: An operation system that has optimizations for HT Technology
1-3-1Installation of the CPU
Fig. 1
Gently lift the metal
lever located on the
CPU socket to the
upright position.
Metal LeverFig. 2
Remove the plastic
covering on the CPU
socket.
Fig. 3
Notice the small gold
colored triangle located
on the edge of the CPU
socket. Align the
indented corner of the
Fig. 4
Once the CPU is
properly inserted,
please replace the
plastic covering and
push the metal lever
back into its original
position.
CPU with the triangle and gently insert the CPU into
position. (Grasping the CPU firmly between your
thumb and forefinger, carefully place it into the socket
in a straight and downwards motion. Avoid twisting or
bending motions that might cause damage to the CPU
during installation.)
Hardware Installation- 13 -
English
1-3-2Installation of the Heatsink
The heatsink may adhere to the CPU as a result of hardening of the heatsink paste.To prevent
such an occurrence, it is suggested that either thermal tape rather than heat sink paste be used for
heat dissipation or using extreme care when removing the heatsink.
Fig. 6
Finally, please attach the power connector of the
heatsink to the CPU fan header located on the
motherboard.
Fig. 3
Place the heatsink atop the CPU and make sure
the push pins aim to the pin hole on the
motherboard.Pressing down th e push pins
diagonally.
Fig. 4
Please make sure the Male and Female push pin are
joined closely. (for detailed installation instructions,
please refer to the heatsink installation section of the
user manual)
Fig. 5
Please check the back of motherboard after
installing. If the push pin is inserted as the picture,
the installation is complete.
Fig.1
Please apply an even layer of heatsink paste on
the surface of the installed CPU.
Fig. 2
(Turning the push pin along the direction of arrow is
to remove the heatsink, on the contrary, is to install.)
Please note the direction of arrow sign on the male
push pin doesn't face inwards before installation. (This
instruction is only for Intel boxed fan)
Male Push Pin
Female Push Pin
The top of Female Push Pin
GA-8I915P-D Pro Motherboard- 14 -
English
Fig.1
The DIMM socket has a notch, so the DIMM memory module
can only fit in one direction. Insert the DIMM memory module
vertically into the DIMM socket. Then push it down.
Fig.2
Close the plastic clip at both edges of the DIMM sockets to
lock the DIMM module.
Reverse the installation steps when you wish to remove the
DIMM module.
Notch
DDR II
The motherboard supports DDR II memory modules, whereby BIOS will automatically detect memory
capacity and specifications. Memory modules are designed so that they can be inserted only in one direction.
The memory capacity used can differ with each slot.
Before installing the memory modules, please comply with the following conditions:
1.Please make sure that the memory used is supported by the motherboard. It is recommended that
memory of similar capacity, specifications and brand be used.
2.Before installing or removing memory modules, please make sure that the computer power is switched
off to prevent hardware damage.
3.Memory modules have a foolproof insertion design. A memory module can be installed in only one
direction. If you are unable to insert the module, please switch the direction.
1-4Installation of Memory
Hardware Installation- 15 -
English
2 memory modules
4 memory modules
DDR II 1DDR II 2DDR II 3DDR II 4
DS/SS X DS/SS X
XDS/SS X DS/SS
DS/SS DS/SS DS/SS DS/SS
Dual Channel DDR II
GA-8I915P-D Pro supports the Dual Channel Technology. After operating the
Dual Channel Technology, the bandwidth of Memory Bus will add double up to
8.5GB/s.
GA-8I915P-D Pro includes 4 DIMM sockets, and each Channel has two DIMM sockets as following:
Channel A : DDR II 1, DDR II 2
Channel B : DDR II 3, DDR II 4
If you want to operate the Dual Channel Technology, please note the following explanations due
to the limitation of Intel chipset specifications.
1.One/three DDR II memory module is installed: The Dual Channel Technology can't operate
when only one DDR II memory module is installed.
2.Two DDR II memory modules are installed (the same memory size and type): The Dual
Channel Technology will operate when two memory modules are inserted individually into
Channel A and B. If you install two memory modules in the same channel, the Dual Channel
Technology will not operate.
3.Four DDR II memory modules are installed: If you install four memory modules at the same
time, the Dual Channel Technology will operate only when those modules have the same
memory size and type.
We'll strongly recommend our user to slot two DDR II memory modules into the DIMMs with the same color
in order for Dual Channel Technology to work.
The following table is for Dual Channel Technology combination: (DS: Double Side, SS: Single Side)
GA-8I915P-D Pro Motherboard- 16 -
English
1-5Installation of Expansion Cards
You can install your expansion card by following the steps outlined below:
1.Read the related expansion card's instruction document before install the expansion card into the
computer.
2.Remove your computer's chassis cover, screws and slot bracket from the computer.
3.Press the expansion card firmly into expansion slot in motherboard.
4.Be sure the metal contacts on the card are indeed seated in the slot.
5.Replace the screw to secure the slot bracket of the expansion card.
6.Replace your computer's chassis cover.
7.Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
8. Install related driver from the operating system.
Installing a PCI Express x 16 expansion card:
Please carefully pull out the small white-
drawable bar at the end of the
PCI Express x 16 slot when you try to
install/Uninstall the VGA card. Please align
the VGA card to the onboard
PCI Express x 16 slot and press firmly down
on the slot .Make sure your VGA card is
locked by the small white-drawable bar.
Hardware Installation- 17 -
English
PS/2 Keyboard and PS/2 Mouse Connector
To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the
lower port (purple).
Parallel Port
The parallel port allows connection of a printer, scanner and other peripheral devices.
SPDIF_O (SPDIF Out)
The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to
an external Dolby Digital Decoder.
SPDIF_I (SPDIF In)
Use SPDIF In feature only when your device has digital output function.
COM A (Serial Port)
Connects to serial-based mouse or data processing devices.
USB port
Before you connect your device(s) into USB connector(s), please make sure your device(s) such as
USB keyboard, mouse, scanner, zip, speaker...etc. have a standard USB interface.
Also make sure your OS supports USB controller. If your OS does not support USB controller, please
contact OS vendor for possible patch or driver upgrade. For more information please contact your OS or
device(s) vendors.
LAN Port
The provided Internet connection is Gigabit Ethernet, providing data transfer speeds of 10/100/1000Mbps.
Line In
Devices like CD-ROM, walkman etc. can be connected to Line In jack.
Line Out (Front Speaker Out)
Connect the stereo speakers, earphone or front surround speakers to this connector.
MIC In
Microphone can be connected to MIC In jack.
Rear Speaker Out
Connect the rear surround speakers to this connector.
1-6I/O Back Panel Introduction
GA-8I915P-D Pro Motherboard- 18 -
English
1-7Connectors Introduction
1)ATX_12V
2)ATX (Power Connector)
3)CPU_FAN
4)SYS_FAN
5)PWR_FAN
6)NB_FAN
7)FDD
8)IDE
9)S_ATA0 / S_ATA1 / S_ATA2 / S_ATA3
10)PWR_LED
11)F_PANEL
12)AZALIA_FP
13)CD_IN
14)F_USB1 / F_USB2
15)F1_1394 / F2_1394
16)IR
17)CLR_CMOS
18)BAT
13
4
5
7
9
18
11
10
15
14 17
16
6
2
8
12
13
Center/Subwoofer Speaker Out
Connect the Center/Subwoofer speakers to this connector.
Side Speaker Out
Connect the side surround speakers to this connector.
You can use audio software to configure 2-/4-/6-/8-channel audio functioning.
Hardware Installation- 19 -
English
1/2)ATX_12V/ATX (Power Connector)
With the use of the power connector, the power supply can supply enough stable power to all the
components on the motherboard. Before connecting the power connector, please make sure that all
components and devices are properly installed. Align the power connector with its proper location on
the motherboard and connect tightly.
The ATX_12V power connector mainly supplies power to the CPU. If the ATX_12V power
connector is not connected, the system will not start.
Caution!
Please use a power supply that is able to handle the system voltage requirements. It is
recommended that a power supply that can withstand high power consumption be used (300W or
greater). If a power supply is used that does not provide the required power, the result can lead to an
unstable system or a system that is unable to start.
Please remove the sticker on the motherboard before plugging in while the ATX power supplier is 24
pins; Otherwise, please do not remove it.
13
24
13 1
24 12
Pin No.Definition
1 3.3V
2 3.3V
3GND
4VCC
5GND
6VCC
7GND
8Power Good
9 5V SB(stand by +5V)
10 +12V
11 +12V
12 3.3V(Only for 24pins ATX)
13 3.3V
14 -12V
15 GND
16 PS_ON(soft On/Off)
17 GND
18 GND
19 GND
20 -5V
21 VCC
22 VCC
23 VCC
24 GND
Pin No.Definition
1GND
2GND
3+12V
4+12V
GA-8I915P-D Pro Motherboard- 20 -
English
3/4/5)CPU_FAN / SYS_FAN / PWR_FAN (Cooler Fan Power Connector)
The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin (only for CPU_FAN)
power connector and possesses a foolproof connection design.
Most coolers are designed with color-coded power connector wires. A red power connector wire
indicates a positive connection and requires a +12V power voltage. The black connector wire is
the ground wire (GND).
Please remember to connect the power to the cooler to prevent system overheating and failure.
Caution!
Please remember to connect the power to the CPU fan to prevent CPU overheating and failure.
1
1
1
6)NB_FAN (Chip Fan Connector)
If you installed wrong direction, the chip fan will not work. Sometimes will damage the chip fan.
(Usually black cable is GND)
Pin No.Definition
1+12V
2GND
1
CPU_FAN
SYS_FAN
PWR_FAN
Pin No.Definition
1GND
2+12V
3Sense
4Speed Control
(Only for CPU_FAN)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80

Gigabyte GA-8I915P-D Pro Owner's manual

Category
Server/workstation motherboards
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI