2. ROOMS TO GO
  3. 32332025

ROOMS TO GO 32332025, 32320260, 32320272, 32320284, 32320296, 32330297, 32340298, 32350299, 32360492 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Rooms To Go headboard models SH202BGE-1, SH202BLU-1, SH202GRY-1, SH202DGR-1 and SH202PNK-1. This document details the necessary parts and procedures for putting together your headboard and attaching it to bed rails. I'm ready to assist you with any questions you might have as you assemble it.
  • What is included in the box?
    What tools are required for assembly?
    What is the first step of the assembly?
Headboard
Leg
Bolts
M8 x 50mm
Lock Washer
(for M8)
Flat Washer
(for M8)
Bolts
M6 x 50mm
Lock Washer
(for M6)
Allen Key
M4 x 65mm
Allen Key
M5 x 65mm
Hex NutFlat Washer
(for M6)
x4 x4 x4 x4 x4
x1x4x8 x1
ASSEMBLY INSTRUCTION
SH202BGE-1 & SH202BLU-1 & SH202GRY-1 &
SH202DGR-1 & SH202PNK-1
1 2
A B C D E
I
H
G
F
x2
ASSEMBLY INSTRUCTION
SH202BGE-1 & SH202BLU-1 & SH202GRY-1 &
SH202DGR-1 & SH202PNK-1
Begin assembly by attaching each Headboard Leg (2) to the bottom of the Headboard (1) by aligning
the hole and securing with 2 Allen Bolts (A) , 2 Lock Washer (B) , 3 Flat Washer (C) per leg using
Allen Key (I) .
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Attached Bed Rails (not included) to left and right Headboard Legs (2) using 2 Allen bolts (D) and 2 Flat
Washer (F) from the back and 2 Flat Washer (F), 2 Lock Washer (E) and 2 Hex Nuts (G) from the
front. Tighten all bolts with Allen Key (H) provided.
I
A
B
C
F
E
G
F
D
H
/