IVS Human Detection PIR Camera User manual
- Type
- User manual
344Z
Human Detection
Camera Series
Please read instructions thoroughly before operation and retain it for future reference.
For the actual display & operation, please refer to your product in hand.
M602V_V1.1
IMPORTANT SAFEGUARD
All lead-free products offered by the company comply with the requirements of the European
law on the Restriction of Hazardous Substances (RoHS) directive, which means our
manufacture processes and products are strictly “lead-free” and without the hazardous
substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product
must be collected separately at the product end-of-life. This applies to your product and any
peripherals marked with this symbol. Do not dispose of these products as unsorted municipal
waste. Contact your local dealer for procedures for recycling this equipment.
This apparatus is manufactured to comply with the radio interference requirements.
Disclaimer
The information in this manual was current when released. We reserve the right to revise or remove any content
in this manual at any time. We do not warrant or assume any legal liability or responsibility for the accuracy,
completeness, or usefulness of this manual. For the actual display & operation, please refer to your product in
hand. The content of this manual is subject to change without notice.
iPhone® is the registered trademark of Apple Inc.
– The trademark application is filed and under process in the U.S. and other countries.
1
FEATURES
Built-in Infrared sensor alarm for human detection and sending push notifications to your
iPhone (when used with our IVS DVR series)
Supports DVR / Camera Communication System (DCCS) Technology
-- There’s no need to additionally connect RS485 control wires for camera control because the control signals
can be transferred by coaxial cables directly.
-- Camera installation is highly simplified to lower labor cost and working hours.
IR LEDs Built-in for 24-hour day & night surveillance
Smart Light Control to dynamically adjust image performance for clear and accurate images
PACKAGE CONTENT
Human Detection IR Camera Screws & Wall Plugs
User Manual
SPECIFICATIONS
Model Human Detection PIR Camera
Pick-up Element 1/3" HR color CCD image sensor
Number of Pixels 768(H)x494(V) <NTSC> / 752(H)x582(V) <PAL>
Resolution 480 TVL
Min. Illumination 0.17 Lux / F2.0 (IR LED OFF)
Electronic Shutter 1/60 (1/50) to 1/100,000 sec.
S/N Ratio More than 48dB (AGC off)
IR LED 12 units
Day & Night YES
Smart Light Control YES
Lens f3.6mm / F2.0
Lens Angle 92°
Video Output 1.0Vp-p composite, 75Ω
PIR Detection Range 40° wide angle with 5m long distance at 2m height (under 25°C)
DCCS Support YES
Operating Temperature 0 ~ ℃40 (32 ~1℃℉04 )℉
Storage Temperature 0 ~ ℃40 (32 ~1℃℉04 )℉
Humidity 85%
Power Source (±10%) DC12V / 500mA
Current Consumption (±10%) 110mA (IR OFF), 260mA (IR ON)
Dimensions (mm)** 90(W) x 145(H) x 32(D)
Net Weight (g) 220
* Specifications are subject to change without notice.
** Dimensional Tolerance: ± 5mm
3
CONNECTION
1. DC12V Input Terminal
Connect the power terminal of the camera to a DC 12V regulated power supply.
NOTE: Please use the correct power adaptor, DC12V (regulated), to operate this unit.
The power tolerance of this unit is DC12V ± 10%. Over maximum DC 12V
power input will damage this unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output and the monitor video input with 75Ω coaxial cable.
NOTE: When this camera is used with our IVS DVR series, make sure it’s connected
to the video channel which supports DCCS function for the iPhone “Push
Notification” function to work properly.
To know which video channel of your IVS DVR supports DCCS function, please
check with your installer or the specifications of your IVS DVR.
-
1
-
2
-
3
-
4
