2. Office
  3. Office furniture
  4. Multimedia carts & stands
  5. Premier Mounts
  6. BW-BASE
BW-BASE

Premier Mounts BW-BASE User guide

  • Hello! I've reviewed the provided installation guide for PREMIERMOUNTS Dual Pole Carts and Stands. This document details various base types, pole length options, and adapter usage. It also mentions optional accessories such as casters. I'm ready to answer your questions about the installation and features of these products.
  • What bases are covered in this guide?
    What pole length options are available?
    What is included with all the base, except CS-BASE?
    What is included with CS-BASE?
    Are poles sold separately?
Page 1
TL-BASE
PSD-HDCA
PSD-DPB
TS-BASE
DUAL POLE CARTS AND STANDS
POLE LENGTH OPTIONS
EB-BASE CS-BASE
BW-BASE
Nesting cart Lightweight stand
Floor stand
EB-BASE-C
Elliptical cart
Elliptical stand Floor stand (back to back)
Back to back adapter
includes with CS-BASE
Dual pole adapter
includes with all base
(except CS-BASE)
Poles are available in single or pair, black or chrome, full length or cut-in-half length [actual cut lengths]*.
Poles and splice collar (PSD-EXT), Sold separately.
40”
60” - [33/27]*
72” - [36/36]*
84” - [42/42]*
9500434 v1.0
publ. 07/22/20
PSD-EXT*
Installation Guide
DUAL POLE CARTS AND STANDS
+
premiermounts.com | p. 800.368.9700 | e. [email protected]
Page 2
Type A Type B
INSTALLING THE PSD-HDCA
BW and EB bases TL, TS, CS bases
Tighten to engage the jaw.
Insert poles and align openings to
the set screws. Insert poles and align the openings.
Plastic
collar
Opening
FRONT
(4) M8 x 10
Set screws
Refer to PSD-HDCA installation manual for detail.
Installation Guide
DUAL POLE CARTS AND STANDS
1
2A
premiermounts.com | p. 800.368.9700 | e. [email protected]
Page 3
INSTALLING THE PSD-DPB
OPTIONAL
ACCESSORIES
CTM Series RTM Series UFA/USA Series Shelf Option
w/ additional
casters
Bolted
Ø 3/8” thru hole at four locations.
3/8”-16 x 1” long threaded stem.
Commercially available hardware
shown for reference.
Contact a sales representative for compatible mounting and bundling options.
Part Number Wheel Size Description
CAST-BW 3” dia. Set of 4, Black, 2 non-locking and
2 locking casters.
CAST 4” dia.
(4) M8 x 10
set screws
(8) M8 x 25
hex screws
w/ washers
Compatible
mounts and
accessories
Installation Guide
DUAL POLE CARTS AND STANDS
2B
premiermounts.com | p. 800.368.9700 | e. [email protected]
/