CHAUVET DJ Colorband Pix mini Reference guide

Quick Reference Guide

COLORband PiX™ Mini QRG EN

2

About This

Guide

The COLORband PiX™ Mini Quick Reference Guide (QRG) has basic

product information such as mounting, menu options, and DMX values.

Download the User Manual from www.chauvetlighting.com

for more

details.

Disclaimer

The information and specifications contained in this QRG are subject to

change without notice.

Safety Notes

These Safety Notes include important information about installation, use,

and maintenance.

• This product is not intended for permanent installation.

• ONLY connect this product to a grounded and protected circuit.

• Always disconnect from power before cleaning or replacing the fuse.

• DO NOT look at the light source when the product is on.

• Make sure the power cord is not crimped or damaged.

• Never disconnect this product from power cord by pulling or tugging on the

cord.

• When mounting this product overhead, use a safety cable.

• DO NOT allow flammable materials close to the unit while operating.

•

DO NOT touch this product when it is operating because it may be hot.

• The voltage of the outlet to which you are connecting this product must be

within the range stated on the decal or rear panel of the product.

•

Always mount this product in a location with adequate ventilation, at least 20

in (50 cm) from adjacent surfaces.

• The product is for indoor use only (IP20)! To prevent risk of fire or shock,

do not expose the product to rain or moisture.

• Be sure that no ventilation slots on the unit’s housing are blocked.

• Never connect this product to a dimmer or rheostat.

• Replace the fuse with the same type and rating.

• ONLY use the hanging/mounting bracket or the handles to carry this

product.

• The maximum ambient temperature is 104 °F (40 °C). Do not operate this

product at higher temperatures.

• In the event of a serious operating problem, stop using immediately.

• DO NOT open this product. It contains no user-serviceable parts.

• To eliminate unnecessary wear and improve its lifespan, during periods of

non-use completely disconnect the product from power via breaker or by

unplugging it.

Contact

• From outside the U.S., UK, Ireland, or Mexico, contact the distributor of

record to request support or return a product.

• From inside the U.S., UK, Ireland, or Mexico, use the information in

Contact Us at the end of this QRG.

What Is

Included

• COLORband PiX™ Mini

• 2 L-Brackets

• Power Cord

• Warranty Card

• Quick Reference Guide

COLORband PiX™ Mini QRG EN

3

To Begin

Unpack your COLORband PiX™ Mini and make sure you have received

all parts in good condition. If the box or contents appear damaged, notify

the carrier immediately, not Chauvet.

Product

Description

The COLORband PiX™ Mini is an LED strip light with individual pixel

control for pixel ma

pping effects. It includes multiple DMX personalities to

fit any programming style. The COLORband PiX™ Mini

also includes a

password-protected, touch-sensitive digital display.

Product Overview

AC Power

This product has an auto-ranging power supply that can work with an input

voltage range of 100 to 240 VAC, 50/60 Hz.

Power Linking

You can link up to 20 COLORband PiX™ Mini products at 120 VAC and

35 units at 230 VAC.

Fuse Replacement

1. Disconnect the product from power.

2. Wedge the tip of a flat-

head screwdriver into the slot of the fuse holder.

3. Pry the safety cap out of the housing.

4. Remove the blown fuse from the clip on the front of the safety cap and

replace with a fuse of the exact same type and rating.

5. Re-insert the fuse holder and reconnect power.

Control Panel

Description

Button

Function

<MENU>

Exits from the current menu or function

<UP>

Navigates upwards through the menu list and increases

the numeric value when in a function

<DOWN>

Navigates downwards through the menu list and

decreases the numeric value when in a function

<ENTER>

Enables the currently displayed menu or sets the currently

selected value

Back Panel View

Power In

DMX In

Touch Display

Power

Out

DMX Out

Microphone

Sensitivity Knob

COLORband PiX™ Mini QRG EN

4

Mounting

Before mounting this product, read the Safety Notes.

Use at least two

mounting points and one safety per product. Make sure the mounting

clamps (such as CLP-15

clamps from Chauvet) are capable of supporting

the weight of the product. For our Chauvet line of mounting

clamps, go to

www.chauvetlighting.com/cables-clamps-main.html.

Mounting

Diagram

Menu Options

Main Level

Programming Levels

Description

Static Colors C--

C1

Red

C2

Green

C3

Blue

C4

Cyan

C5

Magenta

C6

Yellow

C7

White

Auto Programs P--

P1

7-Color Switching

P2

7-Color Fading

P3

3-Color Switching

P4

3-Color Fading

P5

Chase Program 1

P6

7-Color Sound Active

P7

7-Color Sound Active + Strobe

Program Speed

S--

S001-S100

Selects auto program speed

Slave Mode

SLA

Sets Slave mode

Custom Color

Mixing

U--

r--

Red

g--

Green

b--

Blue

DMX

Personalities and

Starting Address

3-CH

d001-d512

Selects DMX personality and starting

address

4-CH

6-CH

7-CH

9-CH

18-CH

Mounting Clamps

Safety

Cable

L-Brackets/

Floor Supports

Mounting Bracket Adjustment Knobs

COLORband PiX™ Mini QRG EN

5

DMX Linking

The COLORband PiX™ Mini can work with a DMX controller when

linked by DMX serial connections. Instructions for connecting and

configuring this product for DMX operation are in the User Manual. If you

are not familiar with DMX, download the DMX Primer from

www.chauvetlighting.com.

Starting Address

To ensure full access to all channels in each DMX mode, the highest

recommended DMX address is 495.

Master/Slave

Connection

The COLORband PiX™ Mini uses the DMX data connection for its

Master/Slave mode. Instructions for connecting and configuring this

product for Master/Slave operation are in the User Manual.

DMX Values

7-CH

Channel

Function

Value

Percent/Setting

1

Red

000 ó 255

0–100%

2

Green

000 ó 255

0–100%

3

Blue

000 ó 255

0–100%

4 Color Macros

000 ó 015

No function

016 ó 255

Color Macros

5

Speed

000 ó 255

Speed (slow to fast)

(when CH.6 is from 032–223)

Strobe

(CH.1-CH.4 only)

000 ó 015

No function

016 ó 255

0–30Hz

6 Auto Programs

000 ó 031

No function

032 ó 063

Pulse effect 0–100%

064 ó 095

Pulse effect 100%–0

096 ó 114

Pulse effect 100%–0–100%

115 ó 127

Chase program

128 ó 159

Auto fade transition

160 ó 191

Auto snap transition (3 colors)

192 ó 223

Auto snap transition (7 colors)

224 ó 255

Sound active mode

7

Dimmer

000 ó 255

0–100%

3-CH

Channel

Function

Value

Percent/Setting

1

Red

000 ó 255

0–100%

2

Green

000 ó 255

0–100%

3

Blue

000 ó 255

0–100%

4-CH

Channel

Function

Value

Percent/Setting

1

Red

000 ó 255

0–100%

2

Green

000 ó 255

0–100%

3

Blue

000 ó 255

0–100%

4

Dimmer

000 ó 255

0–100%

COLORband PiX™ Mini QRG EN

6

6-CH

Channel

Function

Value

Percent/Setting

Section

1

Red

000 ó 255

0–100%

1

2

Green

000 ó 255

0–100%

3

Blue

000 ó 255

0–100%

4

Red

000 ó 255

0–100%

2

5

Green

000 ó 255

0–100%

6

Blue

000 ó 255

0-100%

9-CH

Channel

Function

Value

Percent/Setting

Section

1

Red

000 ó 255

0–100%

1

2

Green

000 ó 255

0–100%

3

Blue

000 ó 255

0–100%

4

Red

000 ó 255

0–100%

2

5

Green

000 ó 255

0–100%

6

Blue

000 ó 255

0–100%

7

Red

000 ó 255

0–100%

3

8

Green

000 ó 255

0–100%

9

Blue

000 ó 255

0–100%

COLORband PiX™ Mini QRG EN

7

18-CH

Channel

Function

Value

Percent/Setting

Section

1

Red

000 ó 255

0–100%

1

2

Green

000 ó 255

0–100%

3

Blue

000 ó 255

0–100%

4

Red

000 ó 255

0–100%

2

5

Green

000 ó 255

0–100%

6

Blue

000 ó 255

0–100%

7

Red

000 ó 255

0–100%

3

8

Green

000 ó 255

0–100%

9

Blue

000 ó 255

0–100%

10

Red

000 ó 255

0–100%

4

11

Green

000 ó 255

0–100%

12

Blue

000 ó 255

0–100%

13

Red

000 ó 255

0–100%

5

14

Green

000 ó 255

0–100%

15

Blue

000 ó 255

0–100%

16

Red

000 ó 255

0–100%

6

17

Green

000 ó 255

0–100%

18

Blue

000 ó 255

0–100%

Page is loading ...

COLORband PiX™ Mini QRG Multi-Language

18-CH

Канал

Функция

Значение

Процент/Уставка

Раздел

1

Красный

000 ó 255

0–100%

1

2

Зеленый

000 ó 255

0–100%

3

Синий

000 ó 255

0–100%

4

Красный

000 ó 255

0–100%

2

5

Зеленый

000 ó 255

0–100%

6

Синий

000 ó 255

0–100%

7

Красный

000 ó 255

0–100%

3

8

Зеленый

000 ó 255

0–100%

9

Синий

000 ó 255

0–100%

10

Красный

000 ó 255

0–100%

4

11

Зеленый

000 ó 255

0–100%

12

Синий

000 ó 255

0–100%

13

Красный

000 ó 255

0–100%

5

14

Зеленый

000 ó 255

0–100%

15

Синий

000 ó 255

0–100%

16

Красный

000

ó

255

0–100%

6

17

Зеленый

000 ó 255

0–100%

18

Синий

000 ó 255

0–100%

Contact

Us

WORLD HEADQUARTERS - Chauvet

General Information

Address: 5200 NW 108

th

Avenue

Sunrise, FL 33351

Voice: (954) 577-4455

Fax: (954) 929-5560

Toll free: (800) 762-1084

Technical Support

Voice: (954) 577-4455 (Press 4)

Fax: (954) 756-8015

Email: tech@chauvetlighting.com

World Wide Web

www.chauvetlighting.com

UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd.

General Information

Address: Unit 1C

Brookhill Road Industrial Estate

Pinxton, Nottingham, UK

NG16 6NT

Voice: +44 (0)1773 511115

Fax: +44 (0)1773 511110

Technical Support

Email: uktech@chauvetlighting.com

World Wide Web

www.chauvetlighting.co.uk

MEXICO - Chauvet Mexico

General Information

Address: Av. Santa Ana 30

Parque Industrial Lerma

Lerma, Mexico C.P. 52000

Voice: +52 (728) 285-5000

Technical Support

Email: servicio@chauvet.com.mx

World Wide Web

www.chauvet.com.mx

Outside the U.S., United Kingdom, Ireland, or Mexico, contact the dealer of record and follow their

instructions to request support or to return a product. Visit the Chauvet website for contact information.

COLORband™ PiX Mini QRG – Rev. 7 ML

Printed in the P. R. C.

CHAUVET DJ Colorband Pix mini Reference guide

CHAUVET DJ Colorband Pix mini Reference guide

in other languages

Related papers

Other documents