LG H09AK User manual

Category
Mobile air conditioners
Type
User manual
P/NO : MFL67641304
OWNER’S MANUAL
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : WALL MOUNTED
AIR
CONDITIONER
www.lg.com
ENGLISH
ITALIANO ESPAÑOL
FRANCAIS DEUTSCH
ΕΛΛΗΝΙΚΆ
PORTUGUESE
NEDERLANDS
POLSKI
MAGYAR
2
TIPS FOR SAVING ENERGY
ENGLISH
TIPS FOR SAVING ENERGY
Here are some tips that will help you minimize the power consumption when you use the air
conditioner. You can use your air conditioner more efficiently by referring to the instructions
below:
• Do not cool excessively indoors. This may be harmful for your health and may consume more
electricity.
• Block sunlight with blinds or curtains while you are operating the air conditioner.
• Keep doors or windows closed tightly while you are operating the air conditioner.
• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
• Speed up the fan to cool or warm indoor air quickly, in a short period of time.
• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air con-
ditioner is used for many hours.
• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block
the air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty
purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
IMPORTANT SAFETY INSTRUCTIONS
3
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product
WARNING
It can result in serious injury or death when the directions are ignored
CAUTION
It can result in minor injury or product damage when the directions are ignored
WARNING
• Installation or repairs made by unqualified persons can result in hazards to you and others.
• Appliance shall be installed in accordance with national wiring regulations.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual can result in equipment mal-
function, property damage, personal injury and/or death.
• When the power cord is to be replaced, replacement work shall be performed by authorized
personnel only using only genuine replacement parts.
Installation
• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Fail-
ure to do so may result in electric shock or product failure.
• Contact an authorized service center when you install or relocate the air conditioner. Failure to
do so may result in serious injury or product failure.
• Always use a power plug and socket with a ground terminal.Failure to do so may result in
electric shock or product failure
• Install the panel and the cover of the control box safely. Failure to do so may result in explo-
sion or fire.
• Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure
to do so may result in electric shock or product failure.
• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Fail-
ure to do so may result in electric shock or product failure.
• Do not modify or extend the power cable. If the power cable or cord has scratches or skin
peeled off or deteriorated then it must be replaced. It may result in fire or electric shock.
• Be cautious when you unpack or install the air conditioner. Failure to do so may result in seri-
ous injury or product failure.
• Do not install the air conditioner on an unstable surface or where there may be a danger of it
falling. It may result in death, serious injury, or product failure.
• Use inflammable gas (nitrogen) to inspect leak and to purge air, using compressed air or flam-
mable gas may cause fire or explosion.
!
!
!
4
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
Operation
• Do not let the air conditioner run for a long time when the humidity is very high or when a door or
window has been left open. Failure to do so may result in product failure.
• Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Fail-
ure to do so may result in fire, electric shock, or product failure.
• Do not place any objects on the power cord. It may result in electric shock or product failure.
• Do not turn on or off the air conditioner by plugging in or unplugging the power plug. It may result in
fire or electric shock.
• Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or
product failure.
• Do not place a heater or other heating appliances near the power cable. It may result in fire, electric
shock, or product failure.
• Do not allow water to run into the air conditioner. It may result in explosion or fire.
• Do not leave flammable substances such as gasoline, benzene and thinner near the air conditioner.
It may result in explosion or fire.
• Do not use the air conditioner for an extended period of time in a small place without ventilation.
Ventilate the place regularly. Failure to do so may result in explosion or fire.
• When there is a gas leak, ventilate sufficiently before using the air conditioner again. Failure to do so
may result in explosion or fire.
• Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to
do so may result in explosion or fire.
• Stop operating and close the window in strom or hurricane.If possible remove the product from the
window before hurricane arrives
• Do not touch the electrostatic filter after opening the front grille. Failure to do so may result in elec-
tric shock or product failure.
• Contact an authorized service center when the air conditioner is submerged into water due to flood-
ing. Failure to do so may result in explosion or fire.
• Be cautious water could not enter the product
• Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater
are used simultaneously. Failure to do so may result in fire, serious injury, or product failure.
• Turn the main power off and unplug the power plug when you clean or repair the air conditioner.
Failure to do so may result in death, serious injury, or product failure.
• Unplug the power plug when the air conditioner is not used for an extended period of time. Failure
to do so may result in product failure.
• Do not place any objects on the air conditioner. It may result in product failure.
• For inner cleaning, contact an Authorized Service Center or a dealer.
Do not use harsh detergent that causes corrosion or damage on the unit.
Harsh detergent may also cause failure of product, fire, or electronic shock.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
Installation
• Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure
to do so may result in product failure.
• Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result
in product failure.
• Keep level even when installing the product.
• Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not incon-
venience the neighbors. Failure to do so may result in conflict between neighbors.
• When transporting the equipment, there should be at least 2 or more people, or a forklift. It may re-
sult in serious injury.
• Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may re-
sult in product failure.
Operation
• Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may re-
sult in serious injury.
Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-
sumer air conditioner, not a precision refrigeration system. It may result in death, fire or electric shock.
• Do not block the inlet or outlet of air flow. It may result in explosion or product failure.
• Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water.
Use a smooth cloth. It may result in serious injury or product failure.
• Never touch the metal parts of the air conditioner when you remove the air filter. It may result in se-
rious injury or product failure.
• Do not place any objects on the air conditioner. It may result in product failure.
• Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if
necessary.
• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operat-
ing. It may result in electric shock.
• Do not drink the water drained from the air conditioner. It may result in serious health complications.
• Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure
to do so may result in serious injury or product failure.
• Do not mix the batteries for the remote control with other types of batteries or mix new batteries
with used batteries. Failure to do so may result in product failure.
Do not recharge or disassemble the batteries. Failure to do so may result in explosion, fire or serious injury.
• Stop using the remote control if there is a battery fluid leak. If your cloth or skin is exposed to the
battery fluid from a leak, wash it off with clean water. Failure to do so may result in serious injury.
• If you swallow the battery fluid from a leak, wash out the inside of your mouth thoroughly and then
consult a doctor. Failure to do so may result in serious health complications.
• Do not open or close the front panel by force during the front panel moving.
• Should open front panel after lift down front panel slowly when the product is operating.
!
5
ENGLISH
TABLE OF CONTENTS
2
TIPS FOR SAVING ENERGY
3 IMPORTANT SAFETY
INSTRUCTIONS
7 BEFORE USE
7 Components
7 Operation ranges
8 Health care
9 Using remote control
10 - Inserting batteries
10 - Installing remote control holder
11 BASIC FUNCTIONS
11 Cooling your room
11 Heating your room
11 Removing humidity
12 Airing your room
12 Adjusting fan speed
12 Adjusting air flow direction
12 Setting timer
12 - Setting current time
13 - Turning on air conditioner
automatically at a set time
13 - Turning off air conditioner
automatically at a set time
13 - Canceling timer setting
13 - Setting sleep mode
14 ADVANCED FUNCTIONS
14 Changing room temperature quickly
14 Indoor air purification
15 Plasma purification operation
15 Auto operation
16 Auto changeover operation
16 °C/°F Conversion
16 Energy Control mode
17 Silent mode
17 Display screen brightness
18 Operating air conditioner without the re-
mote control
19 Restarting air conditioner
automatically
20 MAINTENANCE
22 Cleaning air filter
22 Cleaning 3M Multi protection filter
23 TROUBLESHOOTING
23 Self-diagnosis function
23 Before requesting service
TABLE OF CONTENTS
6
ENGLISH
Air inlet vents
Air outlet vents
Base plate
Coolant piping
Connection
wire
Drain hose
BEFORE USE
Components
Outdoor unit
On/Off button
Signal receiver
Operation lamp
Air deflector
(vertical louver & Horizontal vane)
Air outlet
3M Multi
protection filter
Front Panel
Air Filter
Plasmaster Ionizer
NOTE
!
• The number of operation lamps and their locations may vary, depending on the model of
the air conditioner.
7
BEFORE USE
ENGLISH
Indoor unit
* The feature can be changed according to a type of model.
* The feature can be changed according to a type of model.
Operation ranges
The table below indicates the temperature ranges the air conditioner can be operated within.
Mode Indoor temperature outdoor temperature
Cooling 18°C~32°C -10°C~48°C
Heating 16°C~30°C -15°C~24°C
8
BEFORE USE
ENGLISH
3M Multi protection filter
<3M Multi
protection filter>
<Plasmaster Ionizer>
1 By providing maximum space with mini-
mum material, 3M Multi protection filter is
the most efficient design which creates
maximum filtration space while being sta-
ble and balanced in structure.
2 Common odor filter removes ordinary odors
that cause migraine and chronic fatigue.
3 The filter blocks neuraminidase and hemag-
glutinin, which is activated when the virus
breaks up from host cell to proliferate.
Plasmaster Ionizer
1
Plasmaster ion particles sterilize the aerial
bacteria and other harmful substances.
2 Plasmaster ion sterilize not only the air
going through the air conditioner, but all
surrounding harmful substances and even
odor.
Health care
BEFORE USE
9
ENGLISH
Using the remote control
You can operate the air conditioner more conveniently with the remote control.
You will find the buttons for the additional functions bellow the down of the display screen.
Wireless remote control
Display
screen
Control
panel
* Some functions may not be supported, depending on the
model.
Control
panel
Display
screen
Description
A
K
IONIZER button*: Plasmaster Ionizer
sterilize the aerial bacteria and other
harmful substances.
l
Sleep mode auto button*: Sets the
sleep mode auto operation.
_
Temperature adjustment buttons: Ad-
justs the room temperature when cool-
ing and heating.
|
- On/Off button: Turns the power on/off.
g
L
Indoor fan speed button: Adjusts the
fan speed.
f
AC
DBE
Operation mode selection button*: Se-
lects the operation mode.
Cooling operation (A) / Auto operation
or auto changeover (C) / Dehumidify-
ing operation (D) / Heating operation
(B) / Air circulation (E)
M
Jet cooling/heating button*: Warms up
or cools down the indoor temperature
within a short period of time.
DE
IJ
Air flow direction button: Adjusts the air
flow direction vertically or horizontally.
k
S
Temperature display button: Displays the
room temperature. Also changes unit
from °C to °F if pressed for 5 seconds.
mn
Timer button: Sets the current time and
the start / end time.
C
B
H
I
J
J
Navigation and functions button*: Ad-
justs the time and sets the special
functions.
I Operates SILENT mode / J Oper-
ates E/Control mode /
J: Auto clean
silent Mode and E/Control are not avail-
able at the same time
G
-
Adjusts the brightness of the indoor
unit display
p
-
Set/clear button: Sets or cancels func-
tions.
r
-
Reset button: Resets the air condi-
tioner settings.
10
BEFORE USE
ENGLISH
Inserting batteries
Insert batteries before using the remote
control. The battery type used is AAA (1.5 V).
1 Remove the battery cover.
2 Insert the new batteries and make sure
that the + and - terminals of the batteries
are installed correctly.
3 Reattach the battery cover.
Installing the remote control holder
Install the holder where there is no direct sun-
light to protect the remote control.
1 Choose a safe and easily-accessible place.
2 Fix the holder by fastening the 2 screws
firmly with a screwdriver or using adhered
double-sided adhesive tape.
3 Slide the remote control into the holder.
Point the remote control towards the signal
receiver at the bottom of the air conditioner to
operate it.
NOTE
!
• If the display screen of the remote con-
trol starts to fade, replace the batteries.
NOTE
!
• The remote control may operate other
electronic devices if pointed towards
them. Make sure to point the remote
control towards the signal receiver of
the air conditioner.
• For proper operation, use a soft cloth to
clean the signal transmitter and receiver.
Operating method
BASIC FUNCTIONS
11
ENGLISH
BASIC FUNCTIONS
Cooling your room
(Cooling operation)
1 Press | to turn on the power.
2 Press f repeatedly to select the cooling
operation.
- A is displayed on the display screen.
3 Press G or H to set the desired tempera-
ture.
- The temperature range is 18°C(64°F) ~
30°C(86°F) .
Heating your room
(Heating operation)
1 Press | to turn on the power.
2 Press f repeatedly to select the heating
operation.
- B is displayed on the display screen.
3 Press G or H to set the desired tempera-
ture.
- The temperature range is 16°C(60°F) ~
30°C(86°F).
Removing humidity
(Dehumidifying operation)
This mode removes excess moisture from an
environment with high humidity or in the rainy
season, in order to prevent mold from setting
in. This mode adjusts the room temperature
and the fan speed automatically to maintain
the optimal level of humidity.
1 Press | to turn on the power.
2 Press f repeatedly to select the dehu-
midifying operation.
-
D is displayed on the display screen.
NOTE
!
• In this mode you cannot adjust the de-
sired temperature, as it is adjusted auto-
matically. Also, the desired temperature
is not displayed on the display screen.
NOTE
!
• Cooling-only models do not support this
function.
BASIC FUNCTIONS
12
ENGLISH
Airing your room
(Air Circulation operation)
This mode only circulates the indoor air
without changing the room temperature.
1 Press | to turn on the power.
2 Press f repeatedly to select the air circu-
lation operation.
- E is displayed on the display screen.
3 Press g to adjust the fan speed.
Adjusting fan speed
1 Press g repeatedly to adjust the fan
speed.
- Select
5
if you want natural air.
The fan speed adjusts automatically.
Adjusting air flow direction
1 To adjust the direction of the air flow hori-
zontally, press D repeatedly and select
the desired direction.
- Select I to adjust the direction of the air
flow automatically.
2 To adjust the direction of the air flow verti-
cally, press E repeatedly and select the
desired direction.
- Select J to adjust the direction of the
air flow automatically.
Setting timer
You can use timer function to save energy and
to use the air conditioner more efficiently.
Setting current time
1 Press p and hold it for longer than 3 sec-
onds.
- The AM/PM icon flickers at the bottom of
the display screen.
NOTE
!
• Adjusting the air flow direction vertically
may not be supported, depending on
the model.
• Adjusting the air deflector arbitrarily may
cause product failure.
• If you restart the air conditioner, it starts
to operate with the previously set direc-
tion of air flow, so the air deflector may
not match icon displayed on the remote
control. When this occurs, press
D or E to adjust the direction of air
flow again.
Remark Speed
High
Medium-High
Medium
Medium-Low
Low
Natural Wind
13
BASIC FUNCTIONS
ENGLISH
2 Press
E
or
F
to select the minutes.
3 Press p to finish.
Turning on air conditioner automati-
cally at a set time
1 Press m.
- The icon below flickers at the bottom of
the display screen.
2 Press
E
or
F
to select the minutes.
3 Press p to finish.
4 When setting the timer, current time and
ON icon are displayed on the display
screen indicating that the desired time is
set.
Turning off air conditioner automati-
cally at a set time
1 Press n.
- The icon below flickers at the bottom of
the display screen.
2 Press
E
or
F
to select the minutes.
3 Press p to finish.
4 When setting the timer, current time and
OFF icon are displayed on the display
screen indicating that the desired time is
set.
NOTE
!
• In the Cooling and Dehumidifying
modes, the temperature increases by
1°C after 30 minutes and by a further
1°C after another 30 minutes for a more
comfortable sleep.
• The temperature increases with up to
2°C from the preset temperature.
• Fan speed can't be changed in case of
sleep mode. Super low fan speed is set
up at cooling and low fan speed is set
up at heating.
Canceling timer setting
1 Press p.
- To cancel all timer settings, press
p.
Setting sleep mode
Use the sleep mode to turn off the air condi-
tioner automatically when you go to sleep.
1 Press | to turn on the power.
2 Press l
3 Press
E
or
F
to select the hour
(up to 7 hours).
4 Press p to finish.
-
T is displayed on the display screen in
sleep mode.
ADVANCED FUNCTIONS
14
ENGLISH
ADVANCED FUNCTIONS
The air conditioner offers some additional ad-
vanced functions.
Changing room temperature
quickly
(Jet Cool/Heat operation)
This mode allows you to cool indoor air quickly
in summer or warm it quickly in winter.
1 Press | to turn on the power.
2 Press
M
.
- In jet cooling mode, strong air blows out
at a temperature of 18°C for 30 minutes.
- In jet heating mode, strong air blows out
at a temperature of 30°C for 30 minutes.
Indoor air purification
Plasmaster Auto Cleaning
In the cooling and dehumidifying operations,
moisture is generated inside the indoor unit.
Use the auto cleaning function to remove
such moisture.
1 Press | to turn on the power.
2 Press
H
.
-
J is displayed on the display screen.
- If you turn off the power, the fan oper-
ates for 30 minutes and the vane is al-
most closed. The plasmaster filter and
plasmaster ionizer also operate to purify
and sterilize inside of the indoor unit dur-
ing auto clean operation.
NOTE
!
• In Air Circulation, Auto, or Auto
Changeover mode, this function cannot
be used.
• This function may not be supported, de-
pending on the model.
NOTE
!
• Some buttons cannot be used while the
auto cleaning function is in operation.
15
ADVANCED FUNCTIONS
ENGLISH
Cooling-only models
Plasmaster purification operation
Ion particles from Plasmaster Ionizer devel-
oped by LG sterilize the aerial bacteria and
other harmful substances.
1 Press | to turn on the power.
2 Press
A
.
-
K is displayed on the display screen.
Auto operation
(Artificial intelligence)
In this mode, the fan speed and the tempera-
ture adjust automatically, based on the room
temperature.
1 Press | to turn on the power.
2 Press f repeatedly to select auto opera-
tion.
- C is displayed on the display screen.
3
Press
G
or
H
to select the desired opera-
tion code if the temperature is higher or
lower than the desired temperature.
NOTE
!
• You can use this function by pressing
A
without turning the air conditioner
on.
• Both the plasma lamp and the cooling
lamp light up while plasma purification is
in operation.
• This function may not be supported, de-
pending on the model.
Code Description
2 Cool
1 Cool slightly
0 Maintain
room
temperature
-1 Heat slightly
-2 Heat
NOTE
!
• In this mode, you cannot adjust the fan
speed, but you can set the air deflector
to rotate automatically.
• This function may not be supported, de-
pending on the model.
ADVANCED FUNCTIONS
16
ENGLISH
Auto Changeover operation
This mode changes the operation mode auto-
matically to maintain the set temperature
at ±2°C.
1 Press | to turn on the power.
2 Press f repeatedly to select the auto
changeover operation.
-
C is displayed on the display screen.
3 Press
G
or
H
to set the desired tempera-
ture.
- The temperature range is 18°C(64°F) ~
30°C(86°F).
4 Press g repeatedly to select the fan
speed.
°C/°F Conversion
The unit converses from °C to °F or from °F
to °C if Room Temperature KEY is pressed for
5 seconds.
Energy Control mode
This mode gives the effect of the power sav-
ing. (Setting available in air cooling mode)
1 step : The power Input in cooling mode
is decreased by 25% compared
to rated power Input
2 step : The power Input in cooling mode
is decreased by 50% compared
to rated power Input
NOTE
!
• This function may not be supported,
depending on the model.
NOTE
!
• In Cooling mode, this function can be
used.
• Every time E/Control on wireless remote
controller is pressed, 1Step, 2Step, func-
tions release are repeated and switched
Wanted temperature appears for 5 sec.
• Capacity may decrease when outdoor
unit Energy Control mode is selected.
Energy Control mode Function available under
the below temperature set
- Cooling-possible temperature range:
Indoor 18°C(64°F) ~ 30°C (86°F),
Outdoor 21°C(70°F) ~ 32°C (90°F)
1 Step Entrance
2 Step Entrance
1 Press | to turn the power on.
2 Press
B
.
-
J is displayed on the display screen.
ADVANCED FUNCTIONS
17
ENGLISH
Silent mode
It is to prevent potential claims by neighbors,
reducing noise from outdoor units.
The outdoor unit sound pressure in cooling
and heating mode is decreased by 3dB com-
pared to the rated sound pressure
1 Press | to turn the power on.
2 Press
C
.
-
I is displayed on the display screen.
NOTE
!
Setting available only under operation-ON
Silent Mode and E/Control are not avail-
able at the same time. If E/Control is
pressed under Silent Mode, Silent Mode is
released and E/Control works.
• Capacity may decrease when outdoor
unit silent mode is selected.
• In Air Circulation, Humidity mode, this
function cannot be used.
Silent mode function available under the
below temperature set
- Cooling-possible temperature range:
Indoor 18°C (64°F) ~ 30°C (86°F),
Outdoor 18°C (64°F) ~ 43°C (109°F)
- Heating-possible temperature range:
Indoor 16°C (60°F) ~ 30°C (86°F),
Outdoor 6°C (43°F) ~ 24°C (75°F)
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
1 Press
G
.
Turn on/off the Display screen.
NOTE
!
This function may not be supported,
depending on the model.
18
ADVANCED FUNCTIONS
ENGLISH
Operating air conditioner
without the remote control
You can use the On/Off button of the indoor
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
1 Open the front panel.
- Lift up both sides of the cover slightly.
2 Press the On/Off button.
3 Close the front panel as soon as you turn
on/off button.
- Lift down both sides of the panel slightly.
- For cooling and heating models, the oper-
ation mode changes, depending on the
room temperature.
- For cooling-only models, the temperature
is set to 22°C.
In case of turning On
Room temp. Set temp.
Operation
mode
Below 21°C 24°C
Heating
operation
Above 21°C
and below
24°C
23°C
Dehumidify-
ing operation
Above 24°C 22°C
Cooling
operation
* The feature can be changed according to
a type of model.
* The feature can be changed according to
a type of model.
19
ADVANCED FUNCTIONS
ENGLISH
1 Close the front panel.
- Lift down both sides of the panel slightly.
2 Open the front panel.
- Lift up both sides of the cover slightly.
3 Press the On/Off button.
4 Close the front panel as soon as you turn
on/off button.
- Lift down both sides of the panel slightly.
Restarting air conditioner au-
tomatically
When the air conditioner is turned on again
after a power failure, this function restores the
previous settings. This function is a factory de-
fault setting.
1 Open the front cover.
- Lift up both sides of the cover slightly.
2 Press the On/Off button and hold it for 6
seconds.
- The unit will beep twice and the lamp will
blink 6 times.
- To re-enable the function, press the On/
Off button and hold it for 6 seconds. The
unit will beep twice and the blue lamp will
blink 4 times.
In case of turning Off
Disabling auto restart
NOTE
!
• If you press and hold the On/Off button
for 3 – 5 seconds instead of 6 seconds,
the unit will switch to the test operation.
• In the test operation, the unit blows out
strong air for cooling for 18 minutes and
then returns to the factory default set-
tings.
* The feature can be changed according to
a type of model.
* The feature can be changed according to
a type of model.
* The feature can be changed according to
a type of model.
* The feature can be changed according to
a type of model.
MAINTENANCE
20
ENGLISH
MAINTENANCE
If the air conditioner will not be used for an extended of time, dry the air conditioner to maintain it
in best condition.
1 Dry the air conditioner in Fan mode for 3 to 4 hours and disconnect the power plug. There
may be internal damage if moisture is left in components.
2 Before using the air conditioner again, dry the inner components of the air conditioner in Fan
mode for 3 to 4 hours. This will help to remove odor which is generated from moisture.
Clean the product regularly to maintain optimal performance and to prevent possible breakdown.
* This may not be provided, depending on the model.
Air filter
3M Multi protection filter
* The feature can be changed according to type of model.
Type Description Interval
Air filter See “Cleaning the filter.” 2 weeks
Plasmaster
ionizer
See “Cleaning the Plasmaster ionizer” 6 months
3M Multi protec-
tion filter
See ”3M Multi protection filter” 1 month
Indoor unit
Clean the Indoor unit surface by using a soft, dry cloth. Regularly
Clean the condensate drain pipe. Every 4 months
Clean the condensate drain pan. Once a year
Thoroughly clean the heat exchanger. Once a year
Replace the remote control batteries. Once a year
Outdoor unit
Use steam to clean the heat exchanger coils and the
panel vents. (consult with technician)
Regularly
Clean the fan. Once a year
Clean the condensate drain pan. Once a year
Verify that all the fan assembly is firmly tightened. Once a year
Verify that electric components with jets of air. Once a year
Clean the electric components with jets of air. Once a year
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27

LG H09AK User manual

Category
Mobile air conditioners
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI