LG 32LJ510Z Owner's manual

www.lg.com

: Depending on model / /

LED TV

LJ51**

LJ54**

P/No: MFL69674124 (1705-REV04)

Printed in Korea

AAA

a

X 2

(M4 X L16)

b

X 5

(M3 X L10)

LJ548*

1 3 42

1

2

a

32LJ51*, 32LJ542*

32LJ548*

1 32

4 5 6

a

b

HDMI IN

USB IN

ANTENNA/

CABLE IN

Satellite IN

VIDEO/Y P

B

P

R

L/MONO AUDIO R

COMPONENT IN AV IN

VIDEO L/MONO AUDIO R

VIDEO AUDIO

VIDEO/Y P

B

P

R

L/MONO AUDIO R

PCMCIA CARD SLOT

H/P OUT

HDMI IN

USB IN

ANTENNA/

CABLE IN

Satellite IN

VIDEO/Y P

B

P

R

L/MONO AUDIO R

COMPONENT IN AV IN

VIDEO L/MONO AUDIO R

VIDEO AUDIO

VIDEO/Y P

B

P

R

L/MONO AUDIO R

PCMCIA CARD SLOT

H/P OUT

HDMI IN

USB IN

ANTENNA/

CABLE IN

Satellite IN

VIDEO/Y P

B

P

R

L/MONO AUDIO R

COMPONENT IN AV IN

VIDEO L/MONO AUDIO R

VIDEO AUDIO

VIDEO/Y P

B

P

R

L/MONO AUDIO R

PCMCIA CARD SLOT

H/P OUT

DC-IN

(19 V )

2

3

1

32LJ51*, 32LJ542*

1

2

43

1

2

43

32LJ548*

1

2

0

D

A

F

1

G

2

G

E

C

B

A

B

C

D

E

F

1

G

2

32LJ510D-TB

32LJ510U-TA

32LJ510Z-TA

32LJ514D-TB

32LJ519D-TA

739 472 168 441 84 4.90 4.85

Power requirement / /

19 V 2.0 A

2.0 19

32LJ542D-TD

739 472 168 441 84 5.10 5.05

Power requirement / /

19 V 2.5 A

2.5 19

A

B

C

D

E

F

1

G

2

32LJ548D-TG

739 472 168 461 92.6 5.90 5.85

Power requirement / /

1

2

0

D

A

F

1

G

2

G

E

C

B

*MFL69674124*

www.lg.com

Please read this manual carefully before operating your

set and retain it for future reference.

Safety and Reference

OWNER’S MANUAL

LED TV*

* LG LED TV applies LCD screen with LED backlights.

*MFL69730705*

P/NO: MFL69730705 (1706-REV01)

2

ENGLISH

Warning! Safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s

enclosure that may be of sucient magnitude to constitute a risk

of electric shock to persons.

This symbol is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

• Do not place the TV and/or remote control in the following

environments:

- A location exposed to direct sunlight

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that

produce heat

- Near kitchen counters or humidiers where they can easily be

exposed to steam or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in re, electric shock, malfunction or

product deformation.

• Do not place the product where it might be exposed to dust. This

may cause a re hazard.

• Mains Plug is the TV connecting/disconnecting device to AC

mains electric supply. This plug must remain readily attached and

operable when TV is in use.

• Do not touch the power plug with wet hands. Additionally, if

the cord pin is wet or covered with dust, dry the power plug

completely or wipe dust o. You may be electrocuted due to excess

moisture.

• Make sure to connect Mains cable to compliant AC mains socket

with Grounded earth pin. (Except for devices which are not

grounded on earth.) Otherwise possibility you may be electrocuted

or injured.

• Insert power cable plug completely into wall socket otherwise if

not secured completely into socket, re ignition may break out.

• Ensure the power cord does not come into contact with hot objects

such as a heater. This may cause a re or an electric shock hazard.

• Do not place a heavy object, or the product itself, on power cables.

Otherwise, this may result in re or electric shock.

• Bend antenna cable between inside and outside building to

prevent rain from owing in. This may cause water damaged

inside the Product and could give an electric shock.

• When mounting TV onto wall make sure to neatly install and

isolate cabling from rear of TV as to not create possibility of electric

shock /re hazard.

• Do not plug too many electrical devices into a single multiple

electrical outlet. Otherwise, this may result in re due to over-

heating.

• Do not drop the product or let it fall over when connecting

external devices. Otherwise, this may result in injury or damage

to the product.

• Keep the anti-moisture packing material or vinyl packing out

of the reach of children. Anti-moisture material is harmful if

swallowed. If swallowed by mistake, force the patient to vomit

and visit the nearest hospital. Additionally, vinyl packing can cause

suocation. Keep it out of the reach of children.

• Do not let your children climb or cling onto the TV.

Otherwise, the TV may fall over, which may cause serious injury.

• Dispose of used batteries carefully to ensure that a small child

does not consume them. Please seek Doctor- Medical Attention

immediately if child consumes batteries.

• Do not insert any metal objects/conductors (like a metal

chopstick/cutlery/screwdriver) into the end of power cable while

the power plug is plugged into wall socket. Additionally, do not

touch the power plug right after unplugging from the wall socket.

You may be electrocuted.

• Do not put or store inammable substances near the product.

There is a danger of combustion/explosion or re due to careless

handling of the inammable substances.

• Do not drop metallic objects such as coins, hair pins, chopsticks or

wire into the product, or inammable objects such as paper and

matches. Children must pay particular attention. Electrical shock,

re or injury can occur. If a foreign object is dropped into the

product, unplug the power cord and contact the service centre.

• Do not spray water on the product or scrub with an inammable

substance (thinner or benzene). Fire or electric shock accident

can occur.

• Do not allow any impact, shock or any objects to fall into the unit,

and do not drop anything onto the screen. You may be injured or

the product can be damaged.

• Never touch this product or antenna during a thunder or lighting

storm. You may be electrocuted.

ENGLISH

3

• Never touch the wall outlet when there is leakage of gas, open the

windows and ventilate. It may cause a re or a burn by a spark.

• Do not disassemble, repair or modify the product at your own

discretion. Fire or electric shock accident can occur.

Contact the service centre for check, calibration or repair.

• If any of the following occur, unplug the product immediately and

contact your local service centre.

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange smell

This may result in re or electric shock.

• Unplug the TV from AC mains wall socket if you do not intend to

use the TV for a long period of time. Accumulated dust can cause

re hazard and insulation deterioration can cause electric leakage/

shock/re.

• Apparatus shall not be exposed to dripping or splashing and no

objects lled with liquids, such as vases, shall be placed on the

apparatus.

• Do not install this product on a wall if it could be exposed to oil or

oil mist. This may damage the product and cause it to fall.

• If water enters or comes into contact with TV, AC adapter or power

cord please disconnect the power cord and contact service centre

immediately. Otherwise, this may result in electric shock or re.

• Only use an authorized AC adapter and power cord approved by

LG Electronics. Otherwise, this may result in re, electric shock,

malfunction or product deformation.

• Never Disassemble the AC adapter or power cord. This may result

in re or electric shock.

• Be careful in handling the adapter to prevent any external shocks

to it. An external shock may cause damage to the adapter.

• Make sure the power cord is connected securely to the power plug

on the TV.

• Install the product where no radio wave occurs.

• There should be enough distance between an outside antenna and

power lines to keep the former from touching the latter even when

the antenna falls. This may cause an electric shock.

• Do not install the product on places such as unstable shelves or

inclined surfaces. Also avoid places where there is vibration or

where the product cannot be fully supported. Otherwise, the

product may fall or ip over, which may cause injury or damage

to the product.

• If you install the TV on a stand, you need to take actions to prevent

the product from overturning. Otherwise, the product may fall

over, which may cause injury.

• If you intend to mount the product to a wall, attach VESA standard

mounting interface (optional parts) to the back of the product.

When you install the set to use the wall mounting bracket

(optional parts), x it carefully so as not to drop.

• Only use the attachments / accessories specied by the

manufacturer.

• When installing the antenna, consult with a qualied service

technician. If not installed by a qualied technician, this may

create a re hazard or an electric shock hazard.

• We recommend that you maintain a distance of at least 2 to 7

times the diagonal screen size when watching TV. If you watch TV

for a long period of time, this may cause blurred vision.

• Only use the specied type of battery. This could cause damage to

the remote control.

• Do not mix new batteries with old batteries. This may cause the

batteries to overheat and leak.

• Batteries should not be exposed to excessive heat. For example,

keep away from direct Sunlight, open replace and electric

heaters.

• Signal from Remote Control can be interrupted due to external/

internal lighting eg Sunlight, uorescent lighting. If this occurs

turn o lighting or darken viewing area.

• When connecting external devices such as video game consoles,

make sure the connecting cables are long enough. Otherwise,

the product may fall over, which may cause injury or damage the

product.

• Do not turn the product On/O by plugging-in or unplugging

the power plug to the wall outlet. (Do not use the power plug for

switch.) It may cause mechanical failure or could give an electric

shock.

• Please follow the installation instructions below to prevent the

product from overheating.

- The distance between the product and the wall should be more

than 10cm.

- Do not install the product in a place with no ventilation (e.g.,

on a bookshelf or in a cupboard).

- Do not install the product on a carpet or cushion.

- Make sure the air vent is not blocked by a tablecloth or curtain.

This may result in re.

• Take care not to touch the ventilation openings when watching

the TV for long periods as the ventilation openings may become

hot. This does not aect the operation or performance of the

product.

4

ENGLISH

• Periodically examine the cord of your appliance, and if its

appearance indicates damage or deterioration, unplug it,

discontinue use of the appliance, and have the cord replaced with

an exact replacement part by an authorized servicer.

• Prevent dust collecting on the power plug pins or outlet. This may

cause a re hazard.

• Protect the power cord from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a door, or walked upon.

Pay particular attention to plugs, wall outlets, and the point where

the cord exits the appliance.

• Do not press strongly upon the panel with a hand or sharp object

such as nail, pencil or pen, or make a scratch on it, as it may

causedamage to screen.

• Avoid touching the screen or holding your nger(s) against it for

long periods of time. Doing so may produce some temporary or

permanent distortion/damage to screen.

• As long as this unit is connected to the AC wall outlet, it is not

disconnected from the AC power source even if you turn o this

unit by SWITCH.

• When unplugging the cable, grab the plug and unplug it, by

pulling at the plug. Don’t pull at the cord to unplug the power cord

from the power board, as this could be hazardous.

• When moving the product, make sure you turn the power o rst.

Then, unplug the power cables, antenna cables and all connecting

cables.

The TV set or power cord may be damaged, which may create a re

hazard or cause electric shock.

• When moving or unpacking the product, work in pairs because the

product is heavy. Otherwise, this may result in injury.

• Refer all servicing to qualied service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

• Do not use high voltage electrical goods near the TV (e.g. electric

mosquito-swatter). This may result in product malfunction.

• When cleaning the product and its components, unplug the power

rst and wipe it with a soft cloth. Applying excessive force may

cause scratches or discolouration. Do not spray with water or wipe

with a wet cloth. Do not clean your TV with chemicals including

glass cleaner, any type of air freshener, insecticide, lubricants, wax

(car, industrial), abrasive, thinner, benzene, alcohol etc., which can

damage the product and/or its panel. Otherwise, this may result

in re, electric shock or product damage (Deformation, corrosion

or breakage).

Preparing

• Image shown may dier from your TV.

• Your TV’s OSD (On Screen Display) may dier slightly from that

shown in this manual.

• The available menus and options may dier from the input source

or product model that you are using.

• New features may be added to this TV in the future.

• The items supplied with your product may vary depending on the

model.

• Product specications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width. Use an

extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not t into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

• Use a certied cable with the HDMI logo attached.

• If you do not use a certied HDMI cable, the screen may not display

or a connection error may occur. (Recommended HDMI Cable Types)

- High-Speed HDMI®/

TM

cable (3 m or less)

- High-Speed HDMI®/

TM

cable with Ethernet (3 m or less)

• How to use the ferrite core (Depending on model)

- Use the ferrite core to reduce the electromagnetic interference

in the power cord. Wind the power cord on the ferrite core once.

[Wall side]

[TV side]

10 cm (+ / -2 cm)

• Do not use any unapproved items to ensure the safety

and product life span.

• Any damage or injuries caused by using unapproved

items are not covered by the manufacturer’s warranty.

• Some models have a thin lm attached on to the

screen and this must not be removed.

• When attaching the stand to the TV set, place the

screen facing down on a cushioned table or at

surface to protect the screen from scratches.

• Make sure that the screws are inserted correctly and

fastened securely. (If they are not fastened securely

enough, the TV may tilt forward after being installed.)

Do not use too much force and over tighten the

screws; otherwise screw may be damaged and not

tighten correctly.

• You need to enable easy access for connecting and

disconnecting electric cables fed from the mains.

ENGLISH

5

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched

or damaged and for safe transportation regardless of its type and size.

• It is recommended to move the TV in the box or packing material

that the TV originally came in.

• Before moving or lifting the TV, disconnect the power cord and all

cables.

• When holding the TV, the screen should face away from you to

avoid damage.

• Hold the top and bottom of the TV frame rmly. Make sure not to

hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• When transporting the TV by hand, hold the TV as shown in the

following illustration.

• When transporting the TV, do not expose the TV to jolts or excessive

vibration.

• When transporting the TV, keep the TV upright, never turn the TV

on its side or tilt towards the left or right.

• Do not apply excessive pressure to cause exing / bending of frame

chassis as it may damage screen.

• When handling the TV, be careful not to damage the protruding

buttons.

• Avoid touching the screen at all times, as this may

result in damage to the screen.

• Do not move the TV by holding the cable holders, as

the cable holders may break, and injuries and damage

to the TV may occur.

Using the button

(Depending on model)

You can simply operate the TV functions, using the button.

Basic functions

Power On (Press)

Power O

1

(Press and hold)

Volume Control

Programmes Control

Power On (Press)

Power O (Press and hold)

Menu Control (Press

2

)

Menu Selection (Press and Hold

3

)

1 If the Menu button is on the screen, pressing and holding the button

will let you exit the Menu.

2 You can access and adjust the menu by pressing the button when

TV is on.

3 You can use the function when you access menu control.

or

6

ENGLISH

Adjusting the menu

(Depending on model)

When the TV is turned on, press the button one time. You can adjust

the Menu items using the button.

Turns the power o.

Accesses the settings menu.

Clears on-screen displays and returns to TV viewing.

Changes the input source.

Scrolls through the saved programmes.

Adjusts the volume level.

Mounting on a table

1 Lift and tilt the TV into its upright position on a table.

• Leave a 10 cm (minimum) space from the wall for proper

ventilation.

10 cm

2 Connect the power cord to a wall outlet.

• Do not place the TV near or on sources of heat, as this

may result in re or other damage.

• Do not apply foreign substances (oils, lubricants, etc.)

to the screw parts when assembling the product.

(Doing so may damage the product.)

• If a television is not positioned in a suciently stable

location, it can be potentially hazardous due to falling.

Many injuries, particularly to children, can be avoided

by taking simple precautions such as:

- Using cabinets or stands recommended by the

manufacturer of the television.

- Only using furniture that can safely support the

television.

- Ensuring the television is not overhanging the

edge of the supporting furniture.

- Not placing the television on tall furniture (for

example, cupboards or bookcases) without

anchoring both the furniture and the television to

a suitable support.

- Not standing the televisions on cloth or other

materials placed between the television and

supporting furniture.

- Educating children about the dangers of climbing

on furniture to reach the television or its controls.

ENGLISH

7

Securing the TV to a wall

(This feature is not available for all models.)

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back

of the TV.

• If there are bolts inserted at the eye-bolts position, remove the

bolts rst.

2 Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear

of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the at surface.

• Make sure that children do not climb on or hang on

the TV.

• Use a platform or cabinet that is strong and large enough to

support the TV securely.

• Brackets, bolts and ropes are not provided. You can obtain

additional accessories from your local dealer.

Mounting on a wall

Attach an optional wall mount bracket at the rear of the TV carefully

and install the wall mount bracket on a solid wall perpendicular to

the oor. When you attach the TV to other building materials, please

contact qualied personnel. LG recommends that wall mounting be

performed by a qualied professional installer. We recommend the use

of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with

cables connected. When you do not use LG’s wall mount bracket, please

use a wall mount bracket where the device is adequately secured to the

wall with enough space to allow connectivity to external devices. It is

advised to connect all the cables before installing xed wall mounts.

10 cm

Make sure to use screws and wall mount bracket that meet the VESA

standard. Standard dimensions for the wall mount kits are described in

the following table.

Separate purchase (Wall mounting

bracket)

Model

32/43LJ51**

32/43LJ52**

32/43LJ53**

32/43LJ54**

49LJ51**

49LJ52**

VESA (A x B) (mm) 200 x 200 300 x 300

Standard screw M6 M6

Number of screws 4 4

Wall mount

bracket

LSW240B

MSW240

LSW350B

MSW240

A

B

8

ENGLISH

• Remove the stand before installing the TV on a wall

mount by performing the stand attachment in reverse.

• When installing the wall mounting bracket, it is recommended to

cover the stand hole using tape, in order to prevent the inux of

dust and insects. (Depending on model)

Stand hole

Connections (notications)

Connect various external devices to the TV and switch input modes to

select an external device. For more information of external device’s

connection, refer to the manual provided with each device.

Available external devices are: HD receivers, DVD players, VCRs, audio

systems, USB storage devices, PC, gaming devices, and other external

devices.

• The external device connection may dier from the model.

• Connect external devices to the TV regardless of the order of the

TV port.

• If you record a TV programme on a DVD recorder or VCR, make

sure to connect the TV signal input cable to the TV through a DVD

recorder or VCR. For more information of recording, refer to the

manual provided with the connected device.

• Refer to the external equipment’s manual for operating

instructions.

• If you connect a gaming device to the TV, use the cable supplied

with the gaming device.

• In PC mode, there may be noise associated with the resolution,

vertical pattern, contrast or brightness. If noise is present, change

the PC output to another resolution, change the refresh rate to

another rate or adjust the brightness and contrast on the PICTURE

menu until the picture is clear.

• In PC mode, some resolution settings may not work properly

depending on the graphics card.

Antenna connection

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal amplier properly to

improve the image quality.

• If the image quality is poor with an antenna connected, try to

realign the antenna in the correct direction.

• An antenna cable and converter are not supplied.

• Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,

HE-AAC

Page is loading ...

LG 32LJ510Z Owner's manual

This manual is also suitable for

LG 32LJ510Z Owner's manual

Related papers

Other documents