dji Go User manual

Page is loading ...

User Guide

2

使用说明



5

使用說明



8

ユーザーガイド



11

사용자 가이드

14

Bedienungsanleitung 17

Guía del usuario 20

Guide de l'utilisateur 23

Guida dell'utente 26

Gebruiksaanwijzing 29

Manual do utilizador 32

Руководство пользователя 35

Compliance Information 38

CONTENTS

EN

CHS

CHT

JP

KR

DE

ES

FR

IT

NL

PT

RU

EN

2

©

Disclaimer

Thank you for purchasing the DJI

TM

Hex Charger (hereinafter referred to as “Product”). Read this disclaimer

carefully before using this Product. By using this Product, you hereby agree to this disclaimer and signify

that you have read it fully. Please use this Product in strict accordance with the manual and be sure to

pay attention to the Warnings. SZ DJI TECHNOLOGY CO., LTD. and its aliated companies assume no

liability for damage(s) or injuries incurred directly or indirectly from improper use of this Product. Misuse

includes, but is not limited to, using unapproved chargers, charging unapproved batteries, short-circuiting,

overheating, introducing foreign materials into the Product, or touching the terminals with skin or metal.

Refer to the Safety Guidelines and Disclaimer, Intelligent Flight Battery Safety Guidelines, and User Manual

for applicable information not herein contained.

DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its aliated companies.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their

No part of this Product or manual shall be reproduced in any form without the prior written consent or

authorization of DJI.

This disclaimer is produced in various languages. In the event of divergence among dierent versions, the

Simplied Chinese version shall prevail when the Product in question is purchased in China, and English

version shall prevail when the Product in question is purchased in any other region.

Warnings

1. The Hex Charger is only compatible with dedicated Intelligent Flight Batteries and Remote Controllers.

DO NOT attempt to use the Hex Charger with other devices.

2. Place the Hex Charger on a at and stable surface when in use. Ensure the device is properly insulated

to prevent re hazards.

3. DO NOT block the heat vent when using the Hex Charger to ensure that heat can be properly dissipated.

4. DO NOT attempt to touch or expose the metal terminals on the Hex Charger.

5. Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.

Introduction

The DJI Hex Charger is designed for use with dedicated Intelligent Flight Batteries and Remote Controllers.

It can charge up to six Intelligent Flight Batteries and two Remote Controllers simultaneously.

EN

©

3

Overview

Using the Hex Charger

1. Connect the Hex Charger to a power outlet (100-240V, 50/60Hz) with the power cable.

Hex Charger

Power Outlet

2. Insert the Intelligent Flight Battery into the battery port, or connect the Remote Controller to the remote

controller port to begin charging. When the LED lights on the Intelligent Flight Battery or the Remote

Controller turn o, charging is complete and the device can be disconnected from the Hex Charger.

2

4

3

1

※

The TB47 series Intelligent Flight Battery and the TB48 series Intelligent Flight Battery take approximately 1

hour 30 minutes and 1 hour 50 minutes to fully charge respectively.

1. Battery Port

2. Remote Controller Port

3. Power Port

4. Heat Vent

EN

Specications

Model MC6S600

Compatible Battery

Inspire 1 Series Intelligent Flight Battery (TB47/TB48)

Matrice 100 Intelligent Flight Battery (TB47D/TB48D)

Matrice 600 Intelligent Flight Battery (TB47S/TB48S)

Compatible Remote Controller

Inspire 1 Series Remote Controller

Matrice 100 Remote Controller

Matrice 600 Remote Controller

Phantom 4 Remote Controller

Phantom 3 Professional Remote Controller

Operating Temperature 32° to 104° F (0° to 40° C)

DC Output

26.1 V

0 to 3.83 A (Battery Port); 0 to 2 A (Remote Controller Port)

Weight 2140 g

This content is subject to change.

Download the latest version from

http://www.dji.com/product/matrice600

•

The two remote controller ports are connected in parallel with the battery ports as shown in

the gure above. As a result, charging a remote controller together with an Intelligent Flight

Battery on the corresponding port will require longer charging time.

Page is loading ...

CHS

两个遥控器接口分别与图示中对应的电池接口并联，同时使用时充电时间会

略有延长，请耐心等待。

产品规格

产品型号

MC6S600

适用电池

Inspire 1 系列智能飞行电池（TB47/TB48）

Matrice 100 智能飞行电池（TB47D/TB48D）

Matrice 600 智能飞行电池（TB47S/TB48S）

适用遥控器

Inspire 1 系列遥控器

Matrice 100 遥控器

Matrice 600 遥控器

Phantom 4 遥控器

Phantom 3 Professional 遥控器

工作环境温度 0℃至 40℃

直流输出

26.1 V

0 - 3.83 A （电池接口）；0 - 2 A（遥控器接口）

重量 2140 g

Copyright

本指引如有更新，恕不另行通知。

您可以在 DJI 官方网站查询最新版本

http://www.dji.com/product/matrice600

Page is loading ...

CHT

產品規格

產品型號

MC6S600

適用電池

Inspire 1 系列智能飛行電池 (TB47/TB48)

Matrice 100 智能飛行電池 (TB47D/TB48D)

Matrice 600 智能飛行電池 (TB47S/TB48S)

適用遙控器

Inspire 1 系列遙控器

Matrice 100 遙控器

Matrice 600 遙控器

Phantom 4 遙控器

Phantom 3 Professional 遙控器

操作溫度 0℃ 至 40℃

直流輸出

26.1V

0 - 3.83 A ( 電池連接埠 )；0 - 2 A ( 遙控器連接埠 )

重量 2140 g

Copyright

本指南如有更新，恕不另行通知。

您可以在 DJI 官方網站查詢最新版本

http://www.dji.com/product/matrice600

•

兩個遙控器接口分別與圖示中對應的電池接口並聯，同時使用時充電時間

會略有延長，請耐心等待。

Page is loading ...

38

©

Compliance Information

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

EU Compliance Statement

SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential

requirements and other relevant provisions of the LVD Directive.

A copy of the EU Declaration of Conformity is available online at

www.dji.com/euro-compliance

EU contact address: DJI GmbH, Industrie Strasse. 12, 97618, Niederlauer, Germany

Printed in China.

If you have any questions about this document,

please contact DJI by sending a message to

[email protected]

.

如果您对说明书有任何疑问或建议，请通过以下电子邮箱

联系我们：

[email protected]

。

www.dji.com/support

DJI Support

DJI 技术支持

DJI 技術支援

DJI サポート

DJI 고객지원

DJI Support

Servicio de asistencia de DJI

Service client DJI

Assistenza DJI

DJI-ondersteuning

Suporte DJI

Техническая поддержка DJI

中国印制

dji Go User manual

This manual is also suitable for

dji Go User manual

in other languages

Related papers

Other documents