2. KVH
  3. TracPhone Fleet One, FB250 & FB150

KVH TracPhone Fleet One, FB250 & FB150 Installation guide

  • I have analyzed the user manual for the KVH Mast Mounting Kit Fleet One/FB250/FB150. This document provides detailed instructions on how to mount the antenna using the mast mounting kit, complete with recommended torque settings. The manual also explains how to use the grounding foil and specifies the alternative tube sizes. I have read the contents and I’m ready to answer your questions about the procedures outlined.
  • What tool should be used to bend grounding foil?
    What is the recommended torque for the grounding foil?
    What is the recommended torque for the tube?
KVH TracPhone® Fleet One/FB250/FB150
Mast Mounting Kit Assembly
54-0649 Rev. B
Use the diagram below, along with the instructions in the Installation Manual, to mount the
antenna using the mast mounting kit. Do not exceed the recommended torque values.
Recommended
Torque: 8 Nm
Recommended
Torque: 8 Nm
Recommended
Torque: 30 Nm
Note: If sleeve is not used,
a max. OD Ø52 mm tube
can be used
1½" Tube (OD Ø48.3 mm)
Grounding Foil
(Optional)
See Note 1
Completed Mast Mount
Note 1
To bend the grounding foil, use
an approx. Ø4 mm diameter tool
/