Grandstream GRP_WM_S & GRP_WM_L & GRP_WM_C Installation guide

Category
Telephone handsets
Type
Installation guide

Grandstream GRP_WM_S & GRP_WM_L & GRP_WM_C are wall mount brackets for the Grandstream GRP261x, GRP2650, and GRP2670 IP phones. The GRP_WM_S is designed for the GRP2612/P/W and GRP2613 models, the GRP_WM_L is designed for the GRP2614, GRP2615, and GRP2616 models, and the GRP_WM_C is designed for the GRP2650 and GRP2670 models. These brackets allow you to mount your IP phone on a wall, freeing up desk space and providing a more flexible installation option.

The GRP_WM_S & GRP_WM_L & GRP_WM_C brackets are easy to install and come with

Grandstream GRP_WM_S & GRP_WM_L & GRP_WM_C are wall mount brackets for the Grandstream GRP261x, GRP2650, and GRP2670 IP phones. The GRP_WM_S is designed for the GRP2612/P/W and GRP2613 models, the GRP_WM_L is designed for the GRP2614, GRP2615, and GRP2616 models, and the GRP_WM_C is designed for the GRP2650 and GRP2670 models. These brackets allow you to mount your IP phone on a wall, freeing up desk space and providing a more flexible installation option.

The GRP_WM_S & GRP_WM_L & GRP_WM_C brackets are easy to install and come with

Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215. USA
Tel : +1 (617) 566 - 9300
Fax: +1 (617) 249 - 1987
www.grandstream.com
For Certication, Warranty and RMA information, please
visit www.grandstream.com
GRP_WM_S
GRP_WM_L
GRP_WM_C
GRP261x/GRP2650/
GRP2670 IP Phones
Series Wall Mount
Bracket
Quick Installation Guide
~1~
~2~
EN
PACKAGE CONTENTS
OVERVIEW
This guide provides instructions for mounting your GRP261x series phone
to the wall. Provided instructions apply to all GRP261x series models and
all GRP_WM bracket models. There are two wall mount bracket models:
GRP_WM_S for GRP2612/P/W and GRP2613
GRP_WM_L for GRP2614, GRP2615 and GRP2616
GRP_WM_C for GRP2650 and GRP2670
Note: The wall mount bracket is sold separetely (not included in GRP261x
series phone package).
1x Quick Installation
Guide
GRP_WM_S /
GRP_WM_C /
GRP_WM_L
1. Pull out the tab from the handset cradle.
2. Rotate the tab to extension up.
3. Plug it back into the slot with the extension up.
Tab with
extension up
Tab with
extension down
Handset Rest
1
2
3
Note: Screws and anchors required for wall mount installation are not
included in this package.
ADJUSTING HOOKSWITCH TAB
Make sure to adjust the hookswitch tab position up to hold the handset
while the phone is mounted on the wall (tab wih extension down is recom-
meded for desktop usage).
INSTALLING WALL MOUNT BRACKET
1. Put the wall mount’s ribs into the unit’s groove.
2. Press this position and install the wall mount.
3. The wall mount is installed completely.
12
3
GRP261x/GRP2650 phone
Wall mount
bracket
Wall mount
bracket
MOUNTING THE PHONE TO THE WALL
1. Use the wall mount bracket to mark two vertical dots using "wall
mount slots" on the wall where the phone will be installed.
2. Using a drill, make a hole on each marked dot. Put a plastic anchor
and screw (not provided) on each hole. Leave enough space to at-
tach the wall mount bracket to the wall.
3. Mount the GRP261x/GRP262x/GRP263x/GRP2650/GRP2670
phone with wall mount bracket attached to the wall using wall mount
slots.
123
Wall mount Slots
  • Page 1 1
  • Page 2 2

Grandstream GRP_WM_S & GRP_WM_L & GRP_WM_C Installation guide

Category
Telephone handsets
Type
Installation guide

Grandstream GRP_WM_S & GRP_WM_L & GRP_WM_C are wall mount brackets for the Grandstream GRP261x, GRP2650, and GRP2670 IP phones. The GRP_WM_S is designed for the GRP2612/P/W and GRP2613 models, the GRP_WM_L is designed for the GRP2614, GRP2615, and GRP2616 models, and the GRP_WM_C is designed for the GRP2650 and GRP2670 models. These brackets allow you to mount your IP phone on a wall, freeing up desk space and providing a more flexible installation option.

The GRP_WM_S & GRP_WM_L & GRP_WM_C brackets are easy to install and come with

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI