dB Technologies DGS-FIFTYSUB Stabilizer Kit for Fifty Sub Operating instructions

dB Technologies
Brand
dB Technologies
Model
DGS-FIFTYSUB Stabilizer Kit for Fifty Sub
Type
Operating instructions

dB Technologies DGS-FIFTYSUB Stabilizer Kit for Fifty Sub

The dB Technologies DGS-FIFTYSUB Stabilizer Kit is designed to provide a stable and secure mounting solution for FIFTY SUB subwoofers, both individually and in stacks. The kit includes four stabilizer floor brackets, four three-lobes knobs, and two V brackets.

The stabilizer floor brackets attach to the side of the subwoofer, providing a stable base. The three-lobes knobs are used to tighten the brackets in place. The V brackets are used to provide additional stability when stacking two subwoofers.

The DGS-FIFTYSUB Stabilizer Kit is easy to install and can be used in a variety of applications, including live sound reinforcement, DJing, and home audio.

dB Technologies DGS-FIFTYSUB Stabilizer Kit for Fifty Sub

The dB Technologies DGS-FIFTYSUB Stabilizer Kit is designed to provide a stable and secure mounting solution for FIFTY SUB subwoofers, both individually and in stacks. The kit includes four stabilizer floor brackets, four three-lobes knobs, and two V brackets.

The stabilizer floor brackets attach to the side of the subwoofer, providing a stable base. The three-lobes knobs are used to tighten the brackets in place. The V brackets are used to provide additional stability when stacking two subwoofers.

The DGS-FIFTYSUB Stabilizer Kit is easy to install and can be used in a variety of applications, including live sound reinforcement, DJing, and home audio.

info@dbtechnologies-
aeb.com
420120409Q REV.1.0
DGS-FIFTYSUB
ISTRUZIONI DI UTILIZZO KIT STABILIZZATORE DGS-FIFTYSUB
DGS-FIFTYSUB STABILIZER KIT INSTRUCTIONS
DESCRIZIONE: Kit stabilizzatore per montaggio stack di subwoofer FIFTY SUB
DESCRIPTION: Stabilizer kit for FIFTY SUB stack mounting
CONTENUTO DELLA CONFEZIONE
PACKAGE CONTENT
A. (4x) Staffa stabilizzatrice a terra / Stabilizer floor bracket
B. (4x) Volantino a tre lobi / Three lobes knob
C. (2x) Staffa a V / V bracket
ATTENZIONE: Kit stabilizzatore DGS-FIFTYSUB deve essere utilizzato solo da personale qualificato. Assicurarsi che
l’installazione sia posizionata in modo stabile e sicuro per evitare ogni condizione di pericolo per persone,
animali e/o cose. L’utilizzatore è tenuto a verificare le regolamentazioni e le leggi cogenti in materia di sicurezza
nel Paese in cui si utilizza il prodotto. Installare il prodotto attenendosi a quanto illustrato in queste istruzioni. Al
fine dell’utilizzo in sicurezza dell’accessorio, verificarne funzionalità e integrità prima dell’uso.
CAUTION: Only qualified personnel may use the DGS-FIFTYSUB stabilizer kit. To prevent hazards to people,
animals and/or objects, make sure that the installation is stable and secure. Follow the safety regulations and
laws of the country in which you use the product. Install the product as described in these instructions. To use this
accessory safely, check that it is working and intact before use.
VERIFICARE (SE PRESENTE) L’ULTIMA REVISIONE DI QUESTO DOCUMENTO SUL SITO WWW.DBTECHNOLOGIES.COM
CHECK (IF ANY) THE LATEST VERSION OF THIS DOCUMENT ON WWW.DBTECHNOLOGIES.COM
A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA)
Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com [email protected]
info@dbtechnologies-
aeb.com
420120409Q REV.1.0
DGS-FIFTYSUB
INSTALLAZIONE
INSTALLATION
1. Allineare il foro delle staffe stabilizzatrici a terra coi fori laterali del subwoofer e fissare
avvitando il volantino (B).
Align the holes of the stabilizer floor brackets to the holes on the side of the subwoofer as
shown and fasten screwing the B lobe-knob.
2. In caso di montaggio stack di due subwoofer, utilizzare la staffa a V (C) per fornire
maggiore stabilità al cluster.
In case of stack mounting of two subwoofers, use the V bracket to provide more stability
to the cluster.
3. Allineare i fori della staffa a V con quelli dei subwoofer superiori e fissare avvitando i
volantini (B).
Align the holes of the V bracket to the one of the upper subwoofers and fasten screwing
the B lobe-knobs.
Features, specification and appearance of products are subject to change without notice. dBTechnologies reserves the right to make changes or
improvements in design or manufacturing without assuming any obligation change or improve products previously manufactured.
Caratteristiche, specifiche e aspetto dei prodotti sono soggetti a possibili cambiamenti senza previa comunicazione. dBTechnologies si riserva il diritto di
apportare cambiamenti o miglioramenti nel design o nelle lavorazioni senza assumersi l’obbligo di cambiare o migliorare anche i prodotti
precedentemente realizzati.
  • Page 1 1
  • Page 2 2

dB Technologies DGS-FIFTYSUB Stabilizer Kit for Fifty Sub Operating instructions

dB Technologies
Brand
dB Technologies
Model
DGS-FIFTYSUB Stabilizer Kit for Fifty Sub
Type
Operating instructions

dB Technologies DGS-FIFTYSUB Stabilizer Kit for Fifty Sub

The dB Technologies DGS-FIFTYSUB Stabilizer Kit is designed to provide a stable and secure mounting solution for FIFTY SUB subwoofers, both individually and in stacks. The kit includes four stabilizer floor brackets, four three-lobes knobs, and two V brackets.

The stabilizer floor brackets attach to the side of the subwoofer, providing a stable base. The three-lobes knobs are used to tighten the brackets in place. The V brackets are used to provide additional stability when stacking two subwoofers.

The DGS-FIFTYSUB Stabilizer Kit is easy to install and can be used in a variety of applications, including live sound reinforcement, DJing, and home audio.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents